FIAMMA 98655Z178 Adapter Caravan Standard Brackets Instruction Manual
- June 1, 2024
- FIAMMA
Table of Contents
Installation instructions for brackets
Please consult the website for instructions in the languages:
NL-SV-DA-NO-FI-PT
ADAPTER
CARAVAN STANDARD
98655Z178 / 98655Z179
98655Z180 / 98655Z181
98655Z182 / 98655Z183
98655Z184 / 98655Z185
98655Z186
F80L
FIAMMASTORE
M6 DIN 982 6x M6x20 6x 4,2×13 ISO 7049 3x 4,2×25 ISO 7049
3x
|
E
---|---
Adapter Caravan Standard 320|
10x
Adapter Caravan Standard 340|
10x
Adapter Caravan Standard 370|
10x
Adapter Caravan Standard 400|
10x
Adapter Caravan Standard 425|
10x
Adapter Caravan Standard 450|
14x
Adapter Caravan Standard 500|
14x
Adapter Caravan Standard 550|
14x
Adapter Caravan Standard 600|
18x
Check that nothing has been damaged or deformed during transport. In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. Have the installation carried out by qualified personnel and in accordance with local regulations.
ATTENTION: INSTALLATION ON ADAPTER
Ensure that the adapter is mounted linearly and not present curves or
deformation due to the vehicle:
in these cases, shim appropriately to ensure the linearity of the bracket. The
installation of the awning can occur only when the adapter is perfectly
aligned to the wall of the vehicle.
[1]
SIKA 252
Important: use of SIKA 252 adhesive is essential for fixing the bracket (brackets).
[2]
[3]
|
E
---|---
Adapter Caravan Standard 320|
10x
Adapter Caravan Standard 340|
10x
Adapter Caravan Standard 370|
10x
Adapter Caravan Standard 400|
10x
Adapter Caravan Standard 425|
10x
Adapter Caravan Standard 450|
14x
Adapter Caravan Standard 500|
14x
Adapter Caravan Standard 550|
14x
Adapter Caravan Standard 600|
18x
[4]
[5]
Attention Security. Remove this label only after fixing the awning on the adapter.
[6]
3x
3x
When using the awning please follow the instructions of the product.
ATTENTION Periodically check the brackets to make sure they are firmly attached (especially after the first kilometers) make sure the bolts are not loose and that holding brackets have not shifted.
Read the following instructions and warnings carefully; failure to observe
these installation and usage instructions as well as the laws for driving in
the relevant country may cause severe harm or damage for which the
manufacturer declines all responsibility.
In the event of an accident involving the vehicle and/or the product, ensure
that the product has not been damaged. In the event of damage, contact your
local retailer before moving the vehicle.
Fiamma declines every responsibility for any modification of the product that
may cause damage and/ or injury to things and people.
Before installation, ensure compatibility with the vehicle on which the
product must be installed.
Checking that the wall/roof/rear door is sufficiently solid and suitable for
guaranteeing the resistance of the anchoring points is always mandatory. If
not, strength and compliance with the maximum load indicated in the
instructions are not guaranteed and it will be necessary to reinforce it these
points.
Warranty Fiamma
In case of defects with regards to materials and manufacturing, the
customer is entitled to the warranty in accordance with local laws and
regulations of the country in which the product was purchased.
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
R0_IS_98691-130_revA
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials,
specifications and models or to cease production of any model.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>