BEGA 84965 RGBW Compact Floodlight Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 84965 RGBW Compact Floodlight
Product Information
Product Usage Instructions
Application
Product Description
Safety
Installation
Cleaning & Maintenance
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 84965 RGBW Compact Floodlight

Product Information

Specifications:

Module connected wattage: 20.8 W
Luminaire connected wattage: 24 W
Colour temperature of the white LED: 4000 K
Luminaire luminous flux: 1297 lm
Luminaire luminous efficiency: 54 lm / W

Product Usage Instructions

Application:
The compact floodlight with mounting box is designed for permanent installations on a wall, under a ceiling, or on a pillar. It can be controlled by DALI colour light control.

Overvoltage Protection:
The electronic components have overvoltage protection according to DIN EN 61547. For additional protection, consider separate overvoltage protection components available on the manufacturer’s website.

Safety:
Installation and operation must comply with national safety regulations. Only a qualified electrician should perform installation and commissioning to avoid damage due to improper use or installation.

Installation:
Handle LED components carefully to prevent damage. Avoid direct contact with the light output opening during installation or relamping. Place the floodlight unit on the mounting plate as shown in the sketch, align, and securely screw together. Adjust beam direction as needed by loosening and tightening the joint screw with a torque of 7 Nm.

Maintenance:
Inspect the connecting cable for damages and replace it with the help of a qualified electrician only.

Accessories:
Optional accessories include optical filters, shields, and cylindrical shields. Separate instructions for these accessories are available upon request.

FAQ:

Q: Can I install the floodlight myself?
A: Installation and commissioning should only be carried out by a qualified electrician to ensure safety and proper functioning.
Q: How do I adjust the beam direction?
A: Undo the joint screw using a hexagon socket head wrench (size 5 mm), set the desired beam direction, and then tighten the joint screw to a torque of 7 Nm.

Application

Compact floodlight with the mounting box for permanent installations on a wall, under a ceiling or on a pillar. The floodlight can be controlled by DALI colour light control.

Product Description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Clear safety glass
Reflector surface made of pure aluminium Rotation range of floodlight 350°
Swivel range -15°/+90°
Mounting box with 2 fixing holes
ø 4.8 mm · 67 mm spacing
2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5 G 1.5@ Connecting terminal 2.5@ with plug connection
Earth conductor connection
BEGA Ultimate Driver®
Complies with flicker requirements by IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1 LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK08
Protection against mechanical
impacts < 5 joule
– Safety mark
– Conformity mark
Wind catching area: 0.024 m²
Weight: 2.0 kg
This product contains light sources of energy efficiency class(es) F

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage by DIN EN 61547. To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Lamp

Module connected wattage 20.8 W
Luminaire connected wattage 24 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 35 °C
Module designation LED-1161/RGBW
Colour temperature of the white LED 4000 K
Luminaire luminous flux 1297 lm
Luminaire luminous efficiency 54 lm / W

Light technique
Broad spread light distribution. Half beam angle 50° For special lighting applications, an optical filter can be used to change the symmetrical light cone into a flat beam light distribution.

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.

Undo hexagon socket head screws (wrench size 3 mm) at the mounting box and remove mounting plate.
Pass the power connecting cable through the cable entry in the mounting plate.
Note position of application of the mounting plate “arrow down”.
Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
Be sure to use the gasket rings supplied.
Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection to terminal (plug connection).
For digital control please use the 2-pole plug connector DA, DA.
In case this connector is not used the luminaire will be operated at full light output.
Push plug into coupler as far as it will go.
Make sure that gasket is positioned correctly.
Place floodlight unit onto the mounting plate as displayed in the sketch, align and screw together firmly.

Adjustment of beam direction:
Undo joint screw (hexagon socket head wrench size 5 mm) and set the desired beam direction.
Tighten the joint screw.
Torque = 7 Nm.

DIMENSION

$BEGA-84965-RGBW-Compact-Floodlight- $1$$

Cleaning & Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.

Maintenance
The connecting cable between mounting box and floodlight has to be inspected regarding obvious damages and has to be replaced by a qualified electrician only.

Replacing the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The replacement can be carried out by a qualified person using standard tools.
Disconnect the system from the power supply.
Open the floodlight:
- Loosen the back locking pin (hexagon socket wrench size 2 mm) in the trim ring. Remove the trim ring along with the safety glass and reflector by twisting it anti-clockwise. Replace LED module.
- Please follow the installation instructions for the LED module.
- Inspect and, if necessary, replace the luminaire gaskets.
- Defective glass must be replaced.
- Place the trim ring with glass and reflector on the floodlight housing so that the notches in the trim ring and luminaire housing sit on top of each other.
- Twist on the trim ring clockwise as far as the stop. Screw in the locking pin.