pic INSECT KILLER Dual Purpose Bug Zapper With LED Light Owner’s Manual
- June 1, 2024
- PIC
Table of Contents
INSECT KILLER
Dual Purpose Bug Zapper
with LED Light
Owner’s Manual
INSECT KILLER Dual Purpose Bug Zapper With LED Light
IMPORTANT SAFETY INSTRUCTIONS
READ THE ENTIRE PRODUCT LABEL AND OWNERS MANUAL BEFOR USING
ELECTRIC SHOCK RISK – ONLY FOR DRY LOCATIONS
Thankyou for choosing The PIC® Pest Free Living Insect Killer bulb. Please
read this owner’s manual carefully to ensure use of this product complies with
all safety regulations.
The PIC® Pest Free Living Insect Killer bulb is a dual-purpose bug zapper and
LED light designed to discreetly kill bugs on contact from most standard light
fixtures.
The product features UV light as well as a white LED light that illuminates
the area. The inner electric grid kills flying insects on contact. Easy to
clean catch tray slides outdo discard accumulating debris.
INSTALLATION:
- Turn the light switch OFF on the fixture you wish to install the product.
- Remove the existing bulb.
- Screw the product completely into the socket clockwise.
OPERATION:
The PIC® Pest Free Living Insect Killer bulb is designed for use with standard
household medium base (E26) light sockets and is controlled by using the
standard light switch already operating your light fixture. Additional
equipmentis not required.
The product has TWO operating modes —
-
UV and bug-zapping with a white LED light
-
UV and bug-zapping only
-
By flipping the switch ON, the bulb will operate in bug-zapping e mode with both the UV light and white LED light.
-
flipping the light switch OFF then ON after a slight delay, the bulb will operate in bug-zapping mode with the UV light only.
To turn the unit OFF, flip the electrical switch to the OFF position.
To REMOVE INSECTS from the product, remove the bulb from the socket and allow to sit for 45 minutes to fully release the charge from the zapper. To clean zapping grid gently spray compressed/canned air or use “cool” setting on hair dryer. Finally, grasp the catch tray tab and gently pull to remove. Discard debris.
NOTICE : Always operate the product with the catch tray inserted.
CAUTION —High Voltage, Keep out of Reach of Children
CAUTION —High Voltage, disconnect before servicing.
CAUTION -Collected insects may be a fire hazard. Clean dead insects from the
unit frequently.
WARNING – Skin or eye damage may result from directly viewing the light
produced by the lamp in this apparatus. Always disconnect power before
relamping or servicing.
CAUTION —ELECTRICAL SHOCK HAZARD. DO NOT DIRECT WATER, BEIE%IR%_I}I(IJENSPRAY,
OR ANY OTHER LIQUID AT UNIT WHILE IN
CAUTION – Do not allow children to insert bulb into socket.
CAUTION – Do not stick foreign objects, metal objects or fingers into the
unit.
CAUTION — Do not tamper with or modify unit.
CAUTION —Do not clean unit while in electrical socket.
CAUTION —Remove unit from electrical socket before cleaning.
CAUTION — Do not remove bulb while hot.
CAUTION —Before cleaning, allow bulb to sit for atleast 45 minutes to release
charge from electric grid.
CAUTION – Do not clean or spray the unit with water, cleaning spray, or any
other liquid.
CAUTION — Do not submerge uniting water or any liquid.
CAUTION —Keep out of contact with flammable items such as paperer clothing.
CAUTION — Do not use flammable liquids around unit.
CAUTION —Productids not compatible with HID lamps such as the lighting
apparatus, induction lamp, halogen lamp, which have the mechanism and the
electric circuit to adjust light.
CAUTION -Do not use in light with dimmable switch
CAUTION —Do not use if axioelectric grid is damaged or bent.
CAUTION —Use in a fixture installed by a qualified electrician.
CAUTION —Do not use in emergency exit fixtures.
CAUTION —Not for use in fully enclosed fixtures.
Manufactured for:
PIC® Corporation 1101-1107 West Elizabeth Ave.
Linden, NJ 07036, USA 1-800-799-7302
Made in China
EPA Est. No.92299-CHN-1
Patent No. US 10,045,521 B2
PatentNo.US D831,784 S
PatentNo.US D841,763 S
Stock # IKC
v030822
PRODUCT INFORMATION
Model# IK-UVLED C:
-
Voltage: 120V
-
Grid Voltage: ~450V
-
Luminous Flux: 195Im
(For Decorative Purposes Only) -
Lighting Power: 3W
-
Frequency: 60Hz
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This equipment may not cause harmful interference.
- This equipment must accept any interference received, including interference that may cause undesired operation.
Modifications not authorized by the manufacturer may void the user’s authority
to operate this device. This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.