BEGA 85149 Performance Floodlight Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 85149 Performance Floodlight
Product Information
Product Usage Instructions
Dimension
Instructions for use
Product Description
Safety
Installation
Maintenance
Accessories
Documents / Resources

BEGA 85149 Performance Floodlight

Product Information

Specifications

Module connected wattage: 10.8 W
Luminaire connected wattage: 12.5 W
Rated temperature: 25°C to 50°C
Ambient temperature: 25°C to 50°C
Color temperature: 3000 K or 4000 K
Colour rendering index (CRI): >90
Module luminous flux: 1270 lm to 1345 lm
Luminaire luminous flux: 601 lm to 636 lm
Luminaire luminous efficiency: 48.1 lm/W to 50.9 lm/W

Product Usage Instructions

Safety

The installation and operation of this luminaire should only be carried out by a qualified electrician in compliance with national safety regulations. The manufacturer is not liable for damages due to improper use or installation.

Overvoltage Protection

The electronic components have built-in protection against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components available on the manufacturer’s website.

Maintenance

Regularly inspect the connecting cable for damages and replace it if necessary by a qualified electrician. Do not remove the desiccant bag from the luminaire housing as it helps remove residual moisture.

Accessories

Optional accessories like optical filters and shields are available for this product. Separate instructions for using these accessories can be provided upon request.

Spares

Available spare parts include trim rings, LED power supply units, LED modules in different color temperatures, reflectors, gaskets for housing, and trim rings.

FAQ

Q: Can I install the luminaire myself?

A: No, installation should only be done by a qualified electrician.

Q: What should I do if I notice visible damage to the connecting cable?

A: Contact a qualified electrician for inspection and replacement if needed.

Q: Can I use the luminaire without the desiccant bag?

A: No, the desiccant bag should not be removed as it helps remove moisture.

Dimension

BEGA-85149-Performance-Floodlight-fig-1

Instructions for use

Application

Performance floodlight with G½ mounting bush.
The floodlight can be bolted together with any female thread G½ according to ISO 228 supplied by others or to BEGA accessories. For a variety of interior and exterior lighting applications.

Product Description

Luminaire made of aluminum alloy, aluminum, and stainless steel
BEGA Unidure® coating technology
Color graphite or silver
Matt safety glass
Silicone gasket
Reflector surface made of pure aluminum BEGA Hybrid Optics®
The rotation range of floodlight is 350°
Swivel range -30°/+100°
Mounting bracket with G½ threaded connection
Thread length: 14 mm
Connecting cable X05BQ-F 5 G 1 mm²
Cable length 1 m
Complies with flicker requirements by IEEE 1789, DIN IEC/TR 63158, DIN IEC/TR 61547-1 LED power supply unit 220-240 V x 0/50-60 Hz DC 176-276 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK07
Protection against mechanical impacts < 2 joule
Conformity mark
Wind catching area: 0.017 m²
Weight: 1.3 kg
This product contains light sources of energy efficiency class(es) E, F

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage by DIN EN 61547.
To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Installation

Screw the floodlight G½ threaded connection firmly into the on-site G½ female thread or BEGA accessory.
G½ threaded connection torque = 40 Nm. Secure the screw connection from loosening on site (if provided with locking screw S, see fig. A).
Check the earth conductor connection between the G½ threaded connection and the on-site G½ female thread.

Adjust floodlight:

Undo the hexagon socket screw (wrench size 5 mm) and hexagon nut (wrench size 27 mm) and set the desired beam direction (see sketch B, C).

Torque:

Hexagon socket screw = 7 Nm
Hexagon nut = 35 Nm
Secure bolted connection Gß against loosening by tightening the hexagon socket screws (wrench size 2 mm).
The electrical connection must be carried out with matching protection class and safety class, strain-relieved, with suitable connection terminals (not included in the scope of delivery) at the luminaire power supply cable.
Note the correct configuration of the mains supply cable. The earth conductor is connected at the green-yellow (1), the phase to the brown (L), and the neutral conductor to the blue (N) marked wire.
The connection of the control cables is achieved through both leads marked with DALI. In case these leads are not used the luminaire will be operated at full light output.

Lamp

Module connected wattage 10.8 W
Luminaire connected wattage 12.5 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 50 °C

85 149 K3

Module designation LED -1147/930
Color temperature 3000 K
Color rendering index CRI > 90
Module luminous flux 1270 lm
Luminaire luminous flux 601 lm
Luminaire luminous efficiency 48,1 lm / W

85 149 K4

Module designation LED -1147/940
Color temperature 4 000 K
Color rendering index CRI > 90
Module luminous flux 1345 lm
Luminaire luminous flux 636 lm
Luminaire luminous efficiency 50,9 lm / W

Lighting technology

Focused light distribution with minimal diffuse light percentage.
Half beam angle 8°
For special lighting applications, an optical filter can be used to change the symmetrical light cone into a flat beam light distribution.

Cleaning · Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high-pressure cleaners.

Maintenance

The connecting cable between the mounting box and the floodlight has to be inspected for obvious damages and has to be replaced by a qualified electrician only.

Please note:

Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture

Replacing the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools.
Disconnect the system from the power supply.

Open the floodlight:

Remove the trim ring along with the safety glass and reflector by twisting it anti-clockwise.
Replace the LED module.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
The defective glass must be replaced.
Place the trim ring with glass and reflector on the floodlight housing so that the notches in the trim ring and luminaire housing sit on top of each other.
Twist on the trim ring clockwise as far as the stop.

Accessories

71 289 Optical filter flat beam
71 331 Shield
71 336 Cylindrical shield
70 214 Pole cap for pole ø 48 mm
70 248 Pole cap for pole ø 60 mm
70 245 Mounting box
70 252 General fastener
70 280 Tube clamp G½
70 283 Screw clamp
70 379 Crossbeam G½
70 889 Tension belt
For the accessories, separate instructions for use can be provided upon request.

Spares

Trim ring graphite with glass 25 000 250
Trim ring silver with glass 25 000 251
LED power supply unit DEV-0348/300
LED module 3000 K LED-1147/930
LED module 4000 K LED-1147/940
Reflector 75 005 107
Gasket housing 83 000 486
Gasket trim ring 83 002 169
- BEGA Gantenbrink-Leuchten KG
- Postfach 31 60
- 58689 Menden
- info@bega.com
- www.bega.com