KICHLER KLF-LEHR2-54-AS 54 Inch 137cm Ceiling Fan Instruction Manual
- June 1, 2024
- KICHLER
Table of Contents
KICHLER KLF-LEHR2-54-AS 54 Inch 137cm Ceiling Fan
Specifications
- Model: LEHR II – 54 / 137cm
- Product Code: KLF-LEHR2-54-AS
- Rated Current: 0.048A
- Power Factor: 0.98
- Weight: 7.94 KG
- Voltage: 220-240V
Safety Rules
- Only an authorized electrician should execute the installation.
- The installation height should be at least 2.3m from the floor.
- Ensure the fan is securely fastened to the ceiling.
- Check that the blades are not bent and there are no objects in the rotation area to prevent injuries.
Maintenance
Check support connections, brackets, and blade attachments twice a year to
ensure they are secure. Any replacement of parts should be done by qualified
persons.
Installation
Unpack the product carefully and ensure it is complete and intact. Do not use
if there is any damage to the cable, glass, or electrical parts. Contact
customer service in case of damage.
Installation Requirements
- The distance between the fan blades and the wall should be at] least 0.6m.
- The fixing means for attachment to the ceiling should be able to withstand 4 times the weight of the ceiling fan.
SAFETY RULES READ AND SAVE THESE INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
-
Proceed with caution. Read all instructions before beginning the installation. This will help you to avoid errors, which could lead to a hazard or malfunction. Keep the instructions in case you have any questions later. Pass on the instructions to each subsequent owner or user of the product. Ensure that any supplement to the instructions is enclosed. The manufacturer cannot be made responsible and/or liable for personal injuries or damage to property cause by:
. incorrect installation . changes made to the product . improper use (misuse) . failure to observe these instructions. -
Only an authorized electrician should execute the installation.
-
The installation height, i.e. the distance between the blades and the floor, should be at least 2.3 m.
-
Make sure the fan is securely fastened at the ceiling.
-
WARNING! To prevent injuries, make sure the blades are not bent and that there are no objects with in the area of rotation.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
-
WARNING: If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact the service agent or suitably qualified persons.
-
Suitable for indoor use.
-
The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a sufficient strength to withstand 4 times the weight of the ceiling fan. This fan weighs 7.94 KG.
-
Before disassembling light kit, make sure the power supply is disconnected from the main supply. Power supply can be on only after installation is completed.
Health and safety regulations
Comply with the national installation and safety regulations for the
installation, operation and maintenance. Always note the symbols on the
packaging and in these installation instructions. Refer to the following list
for the precise meanings of the symbols: 
Notes on the installation sketch
Intended use / foreseeable misuse
This product is used for lighting. Do not expose the light to large mechanical
loads or stresses or heavy soiling. For safety reasons, you should not change
and/or modify the product. Any use other than that described above can damage
the product. This can cause hazards such as a short-circuit, electric shock or
fire.
Cleaning/maintenance
The light should always be cooled and disconnected from the power supply
before cleaning / maintenance work is carried out! Check that no voltage is
present. For regular cleaning (two to three times a year), use a dry or
lightly moistened cloth and never use chemicals or abrasive cleaner/scouring
agent. We recommend using a stainless steel cleaning product for stainless
steel lights. The following environmental influences can have unwanted effects
on the surface of the product: acid rain and soil, high salt content in the
air, cleaning agents, fertilizers (outdoor lighting; especially in flower
beds), de-icing salt, other chemical substances (e.g. pesticides).
- Because of the fan’s natural movement, some connections may become loose. Check support connections (including the suspension system), brackets, and blade attachments twice a year. Make sure they are secure.
- The replacement of parts of the safety suspension system device shall be performed by the suitably qualified persons.
- For non-user replaceable light sources:
The light source contained in this luminaire shall only be replaced by the qualified person. The rated current of this light fixture is 0.048A, power factor is 0.98.
Notes on disposal
“Green dot” symbol = The packaging is recyclable.
This light should not be disposed of in the normal household waste. It should
be handed in to a collection point for the recycling of large electrical and
electronic appliances. Please find out about the relevant provisions regarding
the separate collection of waste electrical and electronic equipment (WEEE) in
your country. Correct disposal of your waste equipment protects the
environment and people against potential negative consequences.
Batteries do not belong in household waste! Used batteries must be handed in
to the public collection points in your municipa lity or wherever batteries
are sold.
Declaration of conformity
The product is designed, produced and tested in conformity with EN 60598
Unpack the product carefully and check that it is complete and intact. It should not be used if there is any damage to the cable, glass or electrical parts. In such a case, contact customer service immediately.
TOOLS
The distance between the fan blades and the wall should be at least 0.6m.
The installation height, i.e. the distance between the blades and the floor,
should be at least 2.3 m.
The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a sufficient strength to withstand 4 times the weight of the ceiling fan. This fan weighs 7.94 KG
LEARN MODE PROCESS
Control and receiver have been factory programmed. If replacing the
transmitter or receiver, the learn mode process will need to be used. After
installing the unit and restoring power to your fan, press and hold the ”
button 3~5seconds. Light will flash twice and the motor spin, which indicates
that the learning process has completed.
IMPORTANT:
You must press the “ ” button within 60 seconds of restoring power to the fan.
Remote does not need to be re-learned when replacing the battery.
TROUBLESHOOTING
Problem
Fan will not start.
Solution
-
Check circuit fuses or breakers.
-
Check all electrical connections to insure proper contact.
CAUTION: Make sure the main power is OFF when checking any electrical connection. -
Check that the battery of the remote is functional.
Fan sounds noisy.
-
Make sure all motor housing screws are snug.
-
Make sure the screws that attach the fan blade brackets to the motor are tight.
-
Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing.
CAUTION: Make sure main power is. -
Allow a 24-hour “breaking-in” period. Most noise associated with a new fan disappear during this time.
-
If using an optional light kit, make sure the screws securing the glassware are tight. Make sure the light bulbs are not touching any other component.
-
Do not connect this fan to wall mounted variable speed control(s). they are not compatible with ceiling fan motors or remote controls.
-
Make sure the upper canopy is a short distance from the ceiling. It should not touch the ceiling.
Fan wobble.
- Check that all blade and blade arm screws are secure.
- Most fan wobbling problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure this distance. Rotate the fan until the next blade is positioned for measurement. Repeat for each blade. The distance deviation should be equal within 1/8″.
- Use the enclosed Blade Balancing Kit if the blade wobble is still noticeable.
- If the blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weightand possibly result in smoother operation.
Remote control malfunction.
- Do not connect the fan with a wall mounted variable speed control(s).
- Make sure the dip switches are set correctly.
- UK HEAD OFFICE Elstead Lighting Ltd.
- Elstead House, Mill Lane, Alton, Hampshire, GU34 2QJ, UK
- Sales Office: +44 (0) 1420 82377
- Email: sales@elsteadlighting.com