BEGA 89 009 Ceiling and Wall Luminaire Instruction Manual

Table of Contents

BEGA-89-009-Ceiling-and-Wall-Luminaire-PRODUCT

Specifications:
- Luminaire efficiency: 70%
- Lamp Luminaire with screw base E 14
- Lamp output max. 40W
- Energy efficiency class: E

Safety:
- The installation and operation of this luminaire must comply with national safety regulations.
- Only a qualified electrician should handle installation and commissioning.
- The manufacturer does not accept liability for damage due to improper use or installation.
- Any modifications to the luminaire must be made by a responsible person considered as the manufacturer.
Facility:
- Pass the main supply cable through the mounting plate.
- Secure the base of the luminaire onto the mounting surface using provided or suitable fixing material.
- Ensure to use the enclosed gaskets.
- Connect the earth conductor.
- Cover the lines with silicone sleeves and make electrical connections.
- Insert the lamp.
- Place the opal glass into the luminaire base with the sliding bolt glass closure. Turn the glass clockwise until it stops.
Sliding-Bolt Closure:
- The sliding-bolt closure ensures secure and vibration-resistant glass holding. Align the glass with the base plate, ensuring the holding spring bolts fit into the notches. Turn the glass clockwise to lock it securely. To release, turn the glass counterclockwise.

Q: Where can I find detailed technical and lighting data for the lamps?
- A: Detailed technical and lighting data for the lamps can be found on our website data sheets.
Q: What are the available spares for this product?
- A: The available spares include spare glass, an LED lamp 2700 K, an LED lamp 3000 K, and a lampholder. Refer to the part numbers for ordering.

Ceiling and wall luminaire for indoor use

$BEGA-89-009-Ceiling-and-Wall-Luminaire-FIG-1 $1$$

Application

Ceiling and wall luminaire indoor luminaire made of hand-blown opal glass, satin matt and metal housing, for all lighting tasks.
They are ideal for places where a soft and uniform lighting distribution is required.
Luminaire with a high protection class.

Lamp

This product contains light sources of energy efficiency class E

Supplied lamp

Supplied lamp

Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Luminaire housing made of aluminium, finish colour white
Hand-blown opal glass, satin matt, with sliding-bolt closure 2 mounting holes ø 4.5mm
Distance apart 80mm
1 cable entry for mains supply cable up to ø 10.5 mm max. 3 x 1.5@
Lampholder terminals 2.5@
Earth conductor terminal
Lampholder E 14
Safety class I
Protection class IP 44
Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK05
Protection against mechanical impacts < 0.7 joule
$BEGA-89-009-Ceiling-and-Wall-Luminaire-FIG-1 $2$$ – Safety mark
– Conformity mark
Weight: 0.8 kg

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Pass the main supply cable through the mounting plate.
Fix the base of the luminaire with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets.
Make an earth conductor connection.
Push silicone sleeves over the lines and make an electrical connection.
Insert lamp.
Insert the opal glass into the luminaire base with sliding bolt glass closure and turn the glass clockwise up to the stop.

The sliding-bolt closure

The sliding-bolt closure provides a safe and vibration-resistant holding of glass.
Place glass on the base plate and observe that the holding spring bolts fit into the notches of the glass.
Turn the glass clockwise until it is locked.
Thus, you reach a safe and vibration-resistant holding of the glass.
To release the glass from the base plate, turn it counterclockwise.