ELMAG 81020 Gear Column Drill S35 ME Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 81020 Gear Column Drill S35 ME
STRANDS GEAR COLUMN DRILL S 35 ME
Article Number: 81020
EAN Code: 9004853810206
Specifications:
- Drilling capacity in steel
- Thread cutting performance
- Mandrel holding fixture (screw mandrel)
- Speed range
- Speed gradually
- Quill stroke
- Quill feed levels
- Column diameter
- Quill feed t-slot width
- Drill table lift mandrel radius
- Drill table revolving quill distance socket
- Quill distance table min./max.
- Drilling table surface
- Motor power voltage
- Weight
Product Highlights:
Premium quality MADE IN SWEDEN. The transmission is built with traditional
methods for the highest possible torque. Helical gears in combination with
steel against reinforced fibre material provide high efficiency, a low noise
level, long service life, and virtually maintenance-free transmission.
Product Usage Instructions
Before Use:
Ensure the gear column drill is placed on a stable surface.
Operating Instructions:
- Adjust the speed range according to the material you are working on.
- Secure the workpiece using the mandrel holding fixture.
- Select the appropriate drill bit for the desired operation.
- Gradually increase the speed and start drilling by lowering the quill.
Maintenance:
Regularly lubricate moving parts and gears to ensure smooth operation. Clean
the drill table surface after each use to prevent debris buildup.
FAQ:
Q: How do I change the drill bit?
A: To change the drill bit, first, turn off the gear column drill and
wait for it to completely stop. Use the appropriate tools to loosen the chuck
and replace the drill bit with the new one, ensuring it is securely tightened.
Q: What should I do if the drill is making unusual noises?
A: If the drill is making unusual noises, stop using it immediately.
Check for any loose parts or debris stuck in the gears. If the issue persists,
contact customer support for further assistance.
incl. autom. thread tapping set.
incl. one container of gear oil for refilling
Article Number: 81020
EAN Code: 9004853810206
DIAGRAM
TECHNICAL FACTS
- Long service life
- Extremely quiet gearbox operation
- Automatic tool ejection
- Clockwise/anticlockwise rotation as standard
- Drilling head can be swivelled 360° around the column and is height-adjustable
- High-performance tool steel spindle for extreme loads
- High-quality cast-iron rectangular table with T-slots and oil channel
- Table arm is height-adjustable and can be swivelled 360° around the column
- Hardened and ground steel drill column guarantees permanent stability of the machine and high precision and angular fidelity between drill and table
- ME = Incl. electromagnetic quill feed and automatic threading via pushbutton on handwheel
- Electromagnetic feed (ME)
- The automatic feed is operated via pushbuttons in the feed levers. Manual and automatic reversal for thread cutting are standard.
PRODUCT HIGHLIGHTS
Premium quality MADE IN SWEDEN
The transmission is built with traditional methods for the highest possible
torque. Helical gears in combination with steel against reinforced fibre
material provide high efficiency, a low noise level, long service life and
virtually maintenance-free transmission.
SPECIFICATIONS
| drilling capacity in steel | 35 mm |
|---|---|
| thread cutting performance | M22 |
| mandrel holding fixture (screw mandrel) | MK 4 |
| speed range | 75 – 3010 rpm |
| speed gradually | 8 |
| quill stroke | 150 mm |
| quill feed levels | 4 |
| column diameter | 127 mm |
| quill feed | 0,10/0,15/0,22/0,30 mm/rev |
| t-slot width | M14 mm |
| drill table lift | 840 mm |
| mandrel radius | 320 mm |
| drill table revolving | ± 360 ° |
| quill distance socket | 1150 mm |
| quill distance table min./max. | 140 – 820 mm |
| drilling table surface | 500×400 mm |
| motor power | (2-stage) 1400 / 2000 W |
| voltage | 400/50 V/Hz |
| Weight | 290 kg |
COMPRESSED AIR TECHNOLOGY
WELDING TECHNOLOGY
METALWORKING
STONE CUTTING TECHNOLOGY
WORKSHOP TECHNOLOGY
POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>