TRIM-TEX 350 Chamfer Bead Installation Guide
- June 9, 2024
- TRIM-TEX
Table of Contents
TRIM-TEX 350 Chamfer Bead
A popular style among architects, finishers and interior designers alike, 350 Chamfer Bead gives your corners a modern look with crisp lines and stark shadows. The bead’s tighter, ¾”-wide chamfered edges can soften any room.
Installation Guide
-
Technical Specs
-
Setback: 350 Chamfer
-
Scan Below for Installation Video
Before Installation
Ensure setbacks are even with the corner edge. Measure, cut and dry fit the bead, leaving a ½” gap at the floor.
Step 1: Coat both the bead and edge of drywall with Trim-Tex 847 Spray Adhesive.
Step 2: Press the bead in place, applying pressure to the mud legs.
Step 3: Staple every 6”-8” using ½” staples.
Step 4: Finish with drywall compound.
CUSTOMER SUPPORT
3700 W Pratt Avenue, Lincolnwood, IL 60712 • 800-874-2333 • trim-tex.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>