HUMMINBIRD Mega Live Targetlock Remote User Guide

June 4, 2024
Humminbird

HUMMINBIRD-LOGO

HUMMINBIRD Mega Live Targetlock Remote

HUMMINBIRD-Mega-Live-Targetlock-Remote-PRODUCT

Introduction

This manual will guide you through the basic functions of your MEGA Live TargetLock™ Remote, as well as the optional installation of your remote bracket. For more information, see the MEGA Live Imaging Operations Guide on our Web site at humminbird.com.

MEGA Live Imaging TargetLock Remote

Key Functions Overview

ARROW keys: Use the LEFT and RIGHT ARROW keys to steer your MEGA Live TargetLock and to pair your remote to your Humminbird control head. Press the LEFT or RIGHT ARROW key to steer your MEGA Live. Press and hold both ARROW keys simultaneously while your control head is in pairing mode to pair your remote.

TARGETLOCK key: Use the TARGET LOCK key to fix the MEGA Live beam in the direction of the fish or structure. Press the TARGET LOCK key once to fix the beam. Press it again to release the beam.

ONE-BOAT NETWORK key: The ONE-BOAT NETWORK key is customizable. You can program it to mark waypoints, to start and stop pinging from your MEGA Live, and more.

Pairing the Remote to the Control Head

Use the following instructions to pair the MEGA Live TargetLock remote to your Humminbird control head.

APEX/SOLIX Series

  1. Press the HOME key.
  2. Select Settings > CHIRP Sonar > MEGA Live > Pair TargetLock Remote.
  3. On your remote, press and hold the LEFT and RIGHT ARROW keys at the same time until the LEDs at the bottom of the remote begin to scroll. Then release the buttons.
  4. The control head and the remote will go into Pairing Mode. If 30 seconds pass while in Pairing Mode and they do not successfully pair, an error message will display on your control head signaling that the pairing has timed out. Repeat the procedure.

NOTE: After pairing completes, if the lights on the remote blink in a scrolling pattern, this indicates that the control head is updating the remote. When the software update is complete, the pairing process will need to be repeated.

HELIX Series
  1. Main Menu: Press the MENU key twice.
  2. Select the Accessories tab > MEGA Live > MEGA Live Installation.
  3. Select Pair TL Remote, and press the RIGHT Cursor key.
  4. On your remote, press and hold the LEFT and RIGHT ARROW keys at the same time until the LEDs at the bottom of the remote begin to scroll. Then release the buttons.
  5. The control head and the remote will go into Pairing Mode.

If 30 seconds pass while in Pairing Mode and they do not successfully pair, an error message will display on your control head signaling that the pairing has timed out. Repeat the procedure.

NOTE: After pairing completes, if the lights on the remote blink in a scrolling pattern, this indicates that the control head is updating the remote. When the software update is complete, the pairing process will need to be repeated.

Installing the Remote Bracket (optional)

Mounting the Remote Bracket to your boat is an optional installation, and placement of the Remote Bracket is based on personal preference. Humminbird recommends mounting the Remote Bracket to a flat surface where it can be easily accessed but not accidentally pressed. Use the following instructions to mount the bracket:

  1. Check the chosen mounting location for fit and function of the bracket. Clean and thoroughly dry the mounting surface.
  2. Remove the backing from one side of the included foam tape. With the exposed adhesive side of the tape facing the bracket, center the tape against the bracket. Press and hold it in place for 30 seconds.
  3. Remove the backing from the outside of the foam tape. Place the bracket against the mounting location. Firmly press and hold it for 30 seconds.

Forget Remote

In the event you want to disconnect the remote from the control head, use the following instructions:

APEX/SOLIX Series

  1. Press the HOME key.
  2. Select Settings > CHIRP Sonar > MEGA Live.
  3. Select Forget TargetLock Remote. Tap, or press the ENTER key, to select.
HELIX Series
  1. Main Menu: Press the MENU key twice.
  2. Select the Accessories tab > MEGA Live > MEGA Live Installation.
  3. Select Forget TL Remote, and press the RIGHT Cursor key.

Contacting Humminbird

Any questions relating to the product should be directed to our Help Center at https://humminbird-help.johnsonoutdoors.com/hc/en-us or in writing to the address below: Humminbird Service Department 678 Humminbird Lane Eufaula AL 36027 USA.

Social Media Resources

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals