Sytong PM Series Thermal Imaging Sights User Guide

Sytong PM Series Thermal Imaging Sights

Product Information Thermal Imaging Sights PM Series

The Thermal Imaging Sights PM Series is a product of Shenzhen Shi Yutong Technology Co., LTD. It comes with a Military Grade sensor and has a frame rate of Hz. The device is powered by a lithium chargeable flat battery, which needs to be inserted into the battery compartment with the positive polar facing inward. The device has a laser rangefinder that can measure distances. The rangefinding indicator appears at the center of the display, and the measured distance is displayed at the top right corner of the display.

Product Usage Instructions

• Step 1: Power On and Image Settings – Press the power button to refresh the device. Hold the power (ON/OFF) button for seconds to power on the device.
• Step 2 : Laser Rangefinder – Hold the navigation DOWN button for seconds to activate the laser rangefinder. Point the rangefinding indicator at an object to measure the distance.
• Step 3 : APP Connection – Download the APP by scanning the QR code according to the mobile phone system. Turn on WiFi on PM and phone. Enter APP and choose WiFi Sytong… to connect WiFi (Password:12345678).

OVERVIEW

In The Box

• Thermal Imaging Sight
• Manual
• Mount (with screws and hex-nut wrenches)
• Type-C Cable
• 5V 2A Adapter
• Handbag
• Battery

Quick Start

Power On and Image Settings

• Hold the power (ON/OFF) button (11) for 3 seconds to power on.
• Rotate the dioptre adjustment ring (7) to get a clear image of the icons on the display.
• Rotate the lens focusing ring (2) to get a clear image of the observed object.
• Press the navigation UP button (4) to select the operating modes (White Hot,Sky Mode, Black Hot, Red Hot, Fusion).
• Press the navigation DOWN button (6) to select digital magnification (1x, 2x, 4x, 8x).
• Press the MENU button (5) to enter the menu to select the appropriate parameter.
• Hold the power (ON/OFF) button (11) for 3 seconds to power off. The LED indicator will be turned off after the device is powered off.

Buttons

Button Legend

• Power (ON/OFF) Button
  • Hold the power (ON/OFF) button (12) for 3 seconds to power off. The LED indicator will be turned off after power off.
  • Hold the power (ON/OFF) button (12) for 1-2 seconds to go into sleep mode. The LED indicator will be red when the device is in sleep mode. Wake the device by pressing the power (ON/OFF) button.
  • Press the power button to refresh the device.
• Record Button (REC)
  • Press: Take a picture.
  • Hold for 3 seconds: Record a video.
• Navigation UP Button
  • In menu mode : Press to switch menu items upwards.
  • When not in menu mode : Press to change operating mode. Hold to turn on or off the Picture in Picture.
• MENU Button
  • In menu mode : Press to confirm selection. Hold to exit main menu or submenu.
  • When not in menu mode : Press to enter menu mode. Hold to turn on or off the red laser pointer.
• Navigation DOWN Button
  • In menu mode : Press to switch menu items downwards.
  • When not in menu mode : Press to change set-up zoom 1x, 2x, 4x, 8x.
  • Long press to turn on or off ranging.

Menu Functions

1

| ****

Operating Mode

| Options: “White Hot”/”Sky Mode”/”Black Hot”/”Red Hot”/”Fusion” Default mode is “White Hot”

****

2| Video Output| Options: “On”/”Off”

3

| ****

WiFi

| Options: “On”/”Off”

Turn on WiFi on both the device’s Menu and user’s phone.

On user’s phone, find and connect to “Sytong Thermal” WiFi network with password 12345678. Live image will be displayed on the App after the phone is connected to the device’s WiFi.

4| Picture In Picture| Options: Off/Zoom 2x/Zoom 4x/Zoom /Zoom Sx
5| Reticle Type| Options: Off/Select the preferred reticle type from 8 choices
6| Reticle color| Select one of the saved profiles (Max. 10 profiles).
7| Reticle Profiles| Options: Black, white, gray, red, green.

8

| ****

Reticle Adjustment (Zeroing)

| Freeze the image by pressing the MENU button. Move the reticle horizontally or vertically with the UP/DOWN buttons. Switch between horizontal and vertical adjustments by pressing REC button. After the reticle matches the point of impact, press the MENU button to save the position. Input the target distance and select the unit (Meter/Yard). The reticle profile will be saved with the distance as it’ s name .
9| Gyro| Options: On/Off
---|---|---
10| OLED Brightness| Options: Super Dark/Dark/Normal/Bright/Super Bright
11| Target Brightness| Options: 1-5
12| Contrast Ratio| Options: 1-10
13| Image Detail Boost| Options: 1-4
14| ****

Date/Time

| Move the options by pressing the REC button. Change the value using the UP/DOWN button. Confirm the values by pressing the MENU button. Quit by holding the MENU button.
15| Language| Options: English/Chinese/Other Languages
16| Record Audio| Options: On/Off
17| Format| Options: Confirm/Cancel
18| Auto Power Off| Options: 3 Min/5 Min/Off Default·Off
19| Default Setting| Options: Confirm/Cancel
20| Default Setting| Options: Confirm/Cancel

21

| ****

Pixel Fix

| Select “Pixel Fix” and press MENU button to get to the sub menu. The lens should be covered with lens cover before performing the pixel fix. Press the MENU button and follow the prompts to fix the bad pixels. After repair, please remember to save it.

Navigation key up/down move cursor, power button to switch options, short press M key to save.

21

| ****

Image Correction

| Enter the menu of image correction. If image correction is required, select and confirm, close the lens cover, and press “M” to correct the background image uniformity. After correction, it will automatically save and exit.
22| Version| Select “Version” to view the device’s software version.

Installing The Battery

Please use lithium chargeable 3.7V flat battery 18650. Remove battery compartment cap and make sure setting the positive polar towards to the direction inward. Put the cap back and screw it until tight. (Fail to do so may result in restarting!).

Using The Integrated Laser Rangefinder

• Hold the power (ON/OFF) button (11) for 3 seconds to power on the device.
• Hold the navigation DOWN button (4) for 3 seconds to activate the laser rangefinder.
• The rangefinding indicator (a small box) will appear at the center of the display.
• Point the rangefinding indicator at an object to measure the distance (the distance will be displayed at the top right corner of the display).

Installation Of Mount

• Attach the mount to the base of the scope using a hex-nut wrench and screws.
• The mounting holes in the base of the scope enable the mount to be installed in one of the multiple positions. The choice of the mounting position helps the user to ensure the correct eye relief depending on the device type.
• The scope is ready to be installed on a device and to be zeroed.
• Before using the device, please follow instructions in the section “Reticle Adjustment (Zeroing)”.

APP Connection

PM0З

Notice!
Operating Instructions For Accessories

Power Adapter
Used only to charge batteries equal to or below 5V/2A.

Red Laser Pointer Adjustment
Hold the MENU button to turn on/off the red laser pointer. Adjust the position of the red laser pointer by using an inner hexagon wrench.

Micro SD Card
It is recommended to use a micro SD card (FAT32 Format) that is of Class 10 or above for smooth recording. When a new micro SD card is inserted into the device, it is recommended to format the micro SD card (see point 14). To check if the micro SD card is recognised by the device, connect the device to a power source via the USB cable. Turn on the video recording function in the menu. It is successfully in recording mode if the video label flashes. This device supports 8-128GB micro SD cards.

FCC STATEMENT

FCC Warning Statement : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Follow Sytong official account to learn more

Website : https://www.sytong2013.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>