AV Access 4KEX300-F HDMI 2.0 Extender Over Fiber User Manual

AV Access 4KEX300-F HDMI 2.0 Extender Over Fiber

Product Information

The HDMI 2.0 Extender over Fiber, model 4KEX300-F, is a device that allows for the extension of HDMI signals over long distances. It supports resolutions up to 4K@60Hz 4:4:4 8bit and HDCP 2.2. The extender also supports HDR (High Dynamic Range) format and can transmit signals up to a distance of 1000ft/300m via a duplex OM3 optical fiber cable. It features bi-directional IR/RS232 pass through via DIP Switch settings, allowing for control of devices remotely. The extender supports multi-channel PCM, Dolby, and DTS HD audio up to 7.1. With its slim profile and easy installation, it is a space-saving solution for extending HDMI signals.

Product Usage Instructions

Package Contents

Front Panel – Transmitter/Receiver

off.
Status LED| Blinking: The device is working properly. Off: The device is
not working properly.
HDCP LED| On: HDCP protected content is being transmitted. Blinking:
Non-HDCP protected content is being transmitted. Off: No content is
being transmitted.
Link LED| On: The link between transmitter and receiver is normal.
Blinking: The link between transmitter and receiver is abnormal.
Off: No link.

Rear Panel – Transmitter

OM3
multimode optical fiber cable.
4| RS232| For RS232 pass through.
5| IR In| Connect to the supplied IR receiver. Secure the IR receiver
with adhesive.
6| IR Out| Connect to the supplied IR emitter. Secure the IR emitter on
the IR receiving sensor of source device with adhesive.
7| Switch| Switch to RS232 or IR mode. RS232: For RS232 pass through. IR:
For IR pass through.

Rear Panel – Receiver

OM3 multimode optical fiber cable.
4| RS232| For RS232 pass through.
5| IR In| Connect to the supplied IR receiver. Secure the IR receiver
with adhesive.
6| IR Out| Connect to the supplied IR emitter. Secure the IR emitter on
the IR receiving sensor of source device with adhesive.
7| Switch| Switch to RS232 or IR mode. RS232: For RS232 pass through. IR:
For IR pass through.

Introduction

Overview

• This product is a slim HDMI transmitter receiver set. It supports resolutions up to 4K@60Hz 4:4:4 8bit and HDCP 2.2, transporting HDMI signals up to 300m/1000ft over a duplex OM3 multi-mode optical fiber cable. The kit supports bi-directional IR/RS232 pass through via DIP Switch settings, enabling users to control the source or display devices at either the transmitter or receiver side with ease.
• The transmitter and receiver are easy to install. They are space saving and offer ideal solutions for homes, offices, digital entertainment centers, control centers, conference rooms, schools and corporate training environments, etc.

Features

• Supports resolutions up to 4K@60Hz 4:4:4 8bit and HDCP 2.2.
• Supports HDR (High Dynamic Range) format.
• Transmission distance up to 1000ft/300m via a duplex OM3 optical fiber cable.
• Supports bi-directional IR/RS232 pass through via DIP Switch settings.
• Multi-channel PCM, Dolby and DTS HD audio supported up to 7.1.
• Slim profile, space saving and easy-to-install.

Package Contents
Before you start the installation of the product, please check the package contents:

• Transmitter x 1
• Receiver x 1
• 10Gbps 850nm MM SFP+ Module x 2
• Power Supply (DC 12V 0.5A) x 2
• IR Emitter x 1
• Broadband IR Receiver (30-50 KHz) x 1
• Phoenix Male Connector (3.5mm, 3 Pins) x 2
• Mounting Bracket x 4
• User Manual x 1

Panel

Front Panel

Off: The device is powered off.
2| Status LED| Blinking: The device is working properly.
Off: The device is not working properly.
3| HDCP LED| On: HDCP protected content is being transmitted. Blinking: Non-HDCP protected content is being transmitted.
Off: No content is being transmitted.
4| Link LED| On: The link between transmitter and receiver is normal.
Blinking: The link between transmitter and receiver is abnormal.
Off: No link.

Rear Panel

OM3 multimode optical fiber cable.
4| RS232| For RS232 pass through.
No.| Name| Description
---|---|---
5| IR In| Connect to the supplied IR receiver. Secure the IR receiver with adhesive.
6| IR Out| Connect to the supplied IR emitter. Secure the IR emitter on the IR receiving sensor of source device with adhesive.
7| Switch| Switch to RS232 or IR mode.
RS232: For RS232 pass through.
IR: For IR pass through.

via a duplex OM3 multi-mode optical fiber cable.

4| RS232| For RS232 pass through.
5| IR In| Connect to the supplied IR receiver. Secure the IR

receiver with adhesive.

6

|

IR Out

| Connect to the supplied IR emitter. Secure the IR emitter on the IR receiving sensor of source device with adhesive.

7

|

Switch

| Switch to RS232 or IR mode.

RS232: For RS232 pass through.

IR: For IR pass through.

Installation
Note: Ensure the fiber cable length is within 300m/1000ft. RS232 Pass Through
The RS232 ports provide a channel to pass through protocol commands to control third party devices such as your source or display. Switch the panel DIP Switch to RS232, and then connect RS232-enabled devices (such as a computer and a projector) to the transmitter and receiver respectively via RS232 cables. Please refer to the following pin definition of RS232 during your installation.

Specification

Technical

Video Signal Type| HDMI 2.0, HDCP2.2
| 800×6008, 1024×7688, 1280×7688, 1280×8008,
| 1280×9608, 1280×10248, 1360×7688, 1366×7688,
Input/Output Resolution Supported| 1440×9008, 1600×9008, 1600×12008, 1680×10508, 1920×10808, 1920×12008, 3840x2160P2,3,5,6,8,
| 4096x2160P2,3,5,6,8
| 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5
| = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz
Audio Format| Stereo, PCM2.0/5.1/7.1, Dolby TrueHD and DTS HD Master Audio
Fiber Type| Duplex Multi-mode 850nm OM3 Fiber
Fiber Connector Type| LC to LC
Maximum Data Rate| 18Gbps
General
Operation Temperature| 0°C to 45°C (32°F to 113°F)
Storage Temperature| -20°C to 70°C (-4°F to 158°F)
Humidity| 10% to 90%, 10% to 90%, non-condensing
ESD Protection| ±8kV(Air-gap discharge)/
±4kV(Contact discharge)
Surge Protection| Voltage: ±1 kV
Power (Max)| Consumption| Transmitter: 3.9W Receiver: 3.5W
Device Size (W x H x D)| 150 mm×20 mm×74.4 mm/5.91”x 0.79”x 2.93”
Product Weight| Transmitter: 0.30kg/0.66lb Receiver: 0.30kg/0.66lb

Transmission Distance

Warranty

Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable.

1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
4. The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but not covered by normal contract.
6. AV Access Technology Limited preserves the right for interpretation of these cases above and to make changes to them at any time without notice.

Thank you for choosing products from AV Access.
If you have any question, please contact us via the following emails: General Enquiry: info@avaccess.com
Customer/Technical Support: support@avaccess.com

www.avaccess.com
info@avaccess.com

References

• AV Access | Quality & Budget Assured Pro AV Product Manufacturer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>