ELMAG 82027 Radial Column Drill RSBM 4-32 ECO Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 82027 Radial Column Drill RSBM 4-32 ECO
Specifications
- Drilling capacity in steel: 32 mm
- Thread cutting performance: M16
- Mandrel holding fixture (screw mandrel): MK 4 / B 16
- Speed range: Variable
- Speed gradually: Yes
- Quill stroke: 150 mm
- Quill feed levels: Multiple
- T-slot width: Standard
- Drill head lift: Adjustable
- Mandrel radius: Standard
- Drill head revolving: Yes
- Quill distance table min./max.: 0 – 500 mm
- Drilling table surface: 400×400 mm
- Drilling table height: 350 mm
- Motor power: 1500 W
- Lifting spindle engine voltage: 400/50 V/Hz
- Coolant pump performance: 125 W, 25 l/min
- Cubature: 400x400x500 mm
- Dimensions (length x width x height): 1600 x 720 x 2100 mm
- Weight: 1425 kg
Product Usage Instructions
Setup and Preparation
Place the radial column drill on a stable surface with sufficient space around
it for operation and material handling.
Adjusting Speed and Feed Levels
Set the desired speed and feed levels based on the material and type of
drilling operation using the provided controls.
Drilling Process
Secure the workpiece on the drilling table and adjust the drill head to the
desired position. Start the machine and carefully lower the drill bit onto the
material to begin drilling.
Maintenance and Safety
Regularly clean the machine, lubricate moving parts as needed,and follow all
safety guidelines provided in the operating instructions.
FAQ
Q: What is the maximum drilling capacity of the radial column drill?
A: The maximum drilling capacity in steel is 32 mm.
Q: Is the speed adjustable on this machine?
A: Yes, the speed range is variable, and speed can be adjusted gradually
as needed.
Article Number: 82027
EAN Code: 9004853820274
TECHNICAL FACTS
- Torsion-resistant, highly resilient boom construction with solid, ground steel column
- Base body made of heavily ribbed, fine-grained grey cast iron
- Extremely low vibration and smooth running
- Drilling capacity Ø 32 mm
- Extra large cubature
- Very large spindle throat depth, 320 – 820 mm
- Extremely powerful drive unit 1,500 W, 400 V
- Hydraulically operated spindle and feed gearbox running in oil bath – can be operated mechanically Gear wheels made of chrome-nickel steel, hardened and precision ground
- 6 speed levels
- Simple speed and feed adjustment by means of a control lever
- Drilling spindle with precision bearing, high concentricity
- Right and left rotation
- Lifting of the drilling head by means of a lifting spindle drive, hardened lifting spindle
- Cantilever guideways hardened and precision ground
- Cantilever and drill head clamping mechanical
- Automatic quill feed, 3-stage
- Spindle protective cover
- Drilling depth scale and stop
- Drilling table cubes with T-slots
- Halogen drill table lighting
- Machine base with T-slots
- Integrated coolant system with return line, tank in machine base
PRODUCT HIGHLIGHTS
Superflexible – large boom units 1,500 WThe
The RSBM models have a drilling capacity of 32 mm and enable flexible
positioning of the drill along a height-adjustable boom. Time-consuming re-
fitting can largely be eliminated for spaced holes. The RSBMs are therefore an
optimal solution for drilling, reaming and tapping large workpieces such as
steel beams, welded structures and castings – ideal for flexible use in steel
construction and mechanical engineering and for post-processing of cast parts.
They are particularly effective for distortion-free processing of heavy plates
in boiler and industrial furnace construction, e.g. for production of heat
exchangers and pipe support plates.
Standard equipment:
- quick-action drill chuck B 16, 1 – 16 mm
- taper mandrel MK 4 / B 16
- reducing sleeve MK 4 / MK 3
- tool set with drive-out
wedge – operating instructions / CE
SPECIFICATIONS
| drilling capacity in steel | 32 mm |
|---|---|
| thread cutting performance | M22 |
| mandrel holding fixture (screw mandrel) | MK 4 |
| speed range | 75 – 1220 rpm |
| speed gradually | 16 |
| quill stroke | 240 mm |
| quill feed levels | 3 |
| quill feed | 0.10 – 0.25 mm/rev |
| t-slot width | (Table/base) 18/22 mm |
| drill head lift | 500 mm |
| mandrel radius | 320 – 820 mm |
| drill head revolving | ± 180 ° |
| quill distance socket | 860 mm |
| quill distance table min./max. | 0 – 500 mm |
| --- | --- |
| drilling table surface | 400×400 mm |
| drilling table height | 350 mm |
| motor power | 1500 W |
| lifting spindle engine | 750 W |
| voltage | 400/50 V/Hz |
| coolant pump | 125 W |
| cooling pump performance | 25 l/min |
| cubature | 400x400x500 mm |
| length x width | 1600 x 720 mm |
| height (total) | 2100 mm |
| Weight | 1425 kg |
ELMAG® – Start-up Service
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
COMPRESSED AIR TECHNOLOGY
WELDING TECHNOLOGY
METALWORKING
STONE CUTTING TECHNOLOGY
WORKSHOP TECHNOLOGY
POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>