ELMAG 58226 Movable HDi 13K400 TC Induction Heater Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 58226 Movable HDi 13K400 TC Induction Heater
INDUCTION HEATER, MOVABLE HDI 13K400 TC:
incl. 4.25 m induction hose package with lateral heating head
PLEASE NOTE: Device must not be transported horizontally!!!
- Article Number: 58226
- EAN Code: 9004853582264
Now included for a short time free of charge:
58266 | XL induction heating head complete
TECHNICAL FACTS
PRODUCT HIGHLIGHTS
HDi 13K400 TC, 16K400 TC, 18K400 TC, 21K400 TC & 23K400 TC
- Powerful models up to 21 kW with 5” touch screen, coolant temperature display, test menu & temperature level control via thermal sensor.
- Same application options as HDi 11K400 & HDi 16K400 but also expandable for temperature controlled heating of parts by means of an optional thermal sensor.
Features
- Heating power setting via touch screen
- Power display (KW)
- Coolant temperature display (C°/F)
- Temperature level adjustment (with optional external laser sensor)
Test menu
- Phase voltage test
- IGBT test
- DC voltage test
- Diagnostics
- Data history
Equipment
- Induction hose package 4.25m
- Induction heating head for lateral heating
- Mobile generator
- User manual / CE
SPECIFICATIONS
- Output power 13 kW
- Duty cycle at max. Power (at 20 °C) ~45 min
- working frequency 15 – 30 kHz
- inductions-hose package length 4,25 m
- supply cable generator 8 m
- choosable heat power 5 Stages
- thermal overload protection Yes
- liquid cooled Yes
- Hydraulic heat exchanger with fan Yes
- micropocessor controlled Yes
- voltage / phases 400 / 3 V / ~
- Mains frequency 50 Hz
- anti-surge fuse 20 AT
- Degree of protection (IP) 21
- coolant tank 20 l
- Dimensions 550x560x1010 mm
- Weight 120 kg
- connector CEE 32A
ELMAG Start-up Servcie
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
- COMPRESSED AIR TECHNOLOGY
- WELDING TECHNOLOGY
- METALWORKING
- STONE CUTTING TECHNOLOGY
- WORKSHOP TECHNOLOGY
- POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>