ELMAG 58227 Movable HDi Induction Heater Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 58227 Movable HDi Induction Heater
- incl. 4.25 m induction hose package with lateral heating head
- PLEASE NOTE: Device must not be transported horizontally!!!
- Article Number: 58227
- EAN Code: 9004853582271
Now included for a short time free of charge
58258 | XL induction heating head complete
PRODUCT HIGHLIGHTS
HDi 13K400 TC, 16K400 TC, 18K400 TC, 21K400 TC & 23K400 TC
Powerful models up to 21 kW with a 5” touch screen, coolant temperature
display, test menu & temperature level control via thermal sensor. Same
application options as HDi 11K400 & HDi 16K400 but is also expandable for
temperature-controlled heating of parts using an optional thermal sensor.
Features
- Heating power setting via touchscreen
- Power display (KW)
- Coolant temperature display (C°/F)
- Temperature level adjustment (with optional external laser sensor)
Test menu
- Phase voltage test
- IGBT test
- DC voltage test
- Diagnostics
- Data history
Equipment
- Induction hose package 4.25m
- Induction heating head for lateral heating
- Mobile generator
- User manual / CE
SPECIFICATIONS
| Output power | 16 kW |
|---|---|
| Duty cycle at max. Power (at 20 °C) | ~60 min |
| working frequency | 15 – 30 kHz |
| inductions-hose package length | 4,25 m |
| supply cable generator | 8 m |
| choosable heat power | 5 Stages |
| thermal overload protection | Yes |
| liquid-cooled | Yes |
| Hydraulic heat exchanger with fan | Yes |
| microprocessor controlled | Yes |
| voltage/phases | 400 / 3 V / ~ |
| Mains frequency | 50 Hz |
| anti-surge fuse | 25 AT |
| Degree of protection (IP) | 21 |
| coolant tank | 20 l |
| Dimensions | 550x560x1010 mm |
| Weight | 130 kg |
| connector | CEE 32A |
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjusting machine tolerances, e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition
- Lathe chuck reassembly with the marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
- For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>