ELMAG 83107 AS Manual Bending Machine Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
MANUAL BENDING MACHINE
AS 1550×2,2 mm
Article Number: 83107
EAN Code: 9004853831072
TECHNICAL FACTS
- Optimal handling
- One-man operation
- Upper and lower roller adjustable, movable rear roller
- Upper roller detachable from the front, easy removal of the workpiece
PRODUCT HIGHLIGHTS
AS manual round bending machines for stand-alone production
AS and AS-M round bending machines are designed for rolling fine and medium
thickness sheet steel, stainless steel and aluminium.
They enable controlled production of sheet bending radii and production of
semi-finished products such as pipes, pipe sockets and columns, gutters and
half shells, container shells, ventilation pipes and round insulation.
Advanced options
All AS and AS-M models are equipped with a bending device for tapered
workpieces and wire insert grooves for round and spring steel wire.
AS manual
The manually operated AS models are ideal for single part and small batch
processing and offer excellent value for money. Adjustable upper and lower
rollers facilitate sheet feeding. The degree of rolling is adjusted gradually
by means of an adjustable rear roller.
Application examples –
– Plumbers
– Ventilation
– Tank construction
– Insulation companies
– Façade construction
– Pipeline construction
– Installers
– Metalworking shops
– Body shops
– Garages
– Mechanical engineering
– Training workshops
Standard features
– Robust machine body and cast iron roller frames
– High quality steel rollers with very high tensile strength
– Taper bending device for tapered workpieces
– Wire insert grooves on lower and rear roller
– Operating instructions/CE
Special accessories
Induction-hardened steel rollers, very long service life
**SPECIFICATIONS
**
| Drive mode | manual |
|---|---|
| Working length | 1550 mm |
| sheet thickness prebending max. | 2.2 mm |
| sheet thickness bending max. | 2.5 mm |
| upper roll diameter | 90 mm |
| bending diameter min. | 130 mm |
| quality steel rollers | 3 Num. |
| drive rollers (+) | 2 Num. |
| cone bender | Yes |
| wire core grooves lower roller / back roller | Yes |
| Length | 2865 mm |
| Width | 840 mm |
| Height | 1230 mm |
| Weight | 570 kg |
ELMAG® – Start-up Service
Competent execution guaranteed
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run onall shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly”
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
04.04.2024
COMPRESSED AIR TECHNOLOGY
WELDING TECHNOLOGY
METALWORKING
STONE CUTTING TECHNOLOGY
WORKSHOP TECHNOLOGY
POWER GENERATORS
Documents / Resources
|
ELMAG 83107 AS Manual Bending
Machine
[pdf] Owner's Manual
83107 AS Manual Bending Machine, 83107, AS Manual Bending Machine, Manual
Bending Machine, Bending Machine, Machine
---|---