ELMAG 81456 Premium PES 10-4 Professional Eccentric Punching Machine Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 81456 Premium PES 10-4 Professional Eccentric Punching Machine
Specifications:
- Pressure Force: 10 t
- Motor Power: 2200 W
- Motor Rotational Speed: 1400 rpm
- Rotational Speed of Shaft: 35 rpm
- Single Working Cycle of Punch: 1.7 sec
- Max. Working Power: 1600 Pcs./hour
- Noise Level (peak): 60 dB(A)
- Chain Transmission Efficiency: 0.95
- Chain Transmission Proportion: 2:01
- Dimensions: 680 mm (L) x 440 mm (W) x 1214 mm (H)
- Weight: 190 kg
Product Description:
The PREMIUM PES 10/4 is a punching machine designed for forming materials by punching and cutting, capable of processing up to 4 mm thickness. It is operated using an electric foot pedal and comes with six different punching tools:
- Corner Wedge Punch
- Wedge Punch
- Pipe Cutter for Vertical Pipes
- Slot Punch
- Corner Rounding Punch
- Corner Cutter Punch
Product Usage Instructions
Safety Precautions:
Before operating the punching machine, ensure you have read and understood
the user manual. Always wear appropriate safety gear like gloves and goggles
while using the machine.
Setting Up the Machine:
Place the punching machine on a stable surface with enough space for
operation. Ensure the power supply is correctly connected and the foot pedal
is within reach.
Selecting the Punching Tool:
Choose the appropriate punching tool based on the material and shape you
need. Install the selected tool securely in the machine as per the manual.
Operating the Machine:
Step on the electric foot pedal to activate the punching process. Ensure
the material is properly aligned before punching to avoid misalignment or
damage.
Maintenance:
Regularly clean the machine after use and lubricate moving parts as
recommended in the manual. Inspect for any wear and tear and replace parts if
necessary.
Frequently Asked Questions (FAQ):
-
Q: Can I use the machine for materials thicker than 4 mm?
A: No, the machine is designed for processing materials up to 4 mm thick. Exceeding this limit may damage the machine or result in improper operation. -
Q: How often should I lubricate the machine?
A: It is recommended to lubricate the machine after every few hours of operation or as specified in the user manual to ensure smooth functioning.
OVERVIEW
PROFESSIONAL ECCENTRIC PUNCHING MACHINE PREMIUM PES 10/4
- Article Number: 81456
- EAN Code: 9004853814563
TECHNICAL FACTS
Product Description
PREMIUM PES 10/4 is a punching machine specially designed for forming material
by punching and cutting.
It can be used for processing up to 4 mm thick. It is operated by an electric
foot pedal.
The machine can be supplied with 6 different punching tools:
- corner wedge punch
- wedge punch
- pipe cutter for vertical pipes
- slot
- punch – corner rounding
- punch – corner cutter
SPECIFICATIONS
| pressure force | 10 t |
|---|---|
| motor power | 2200 W |
| motor rotational | 1400 rpm |
| rotational of shaft | 35 rpm |
| single working cycle of punch | 1.7 sec |
| max. working power | 1600 Pcs./hour |
| Noise level (peak) | 60 dB(A) |
| chain transmission efficiency | 0.95 |
| chain transmission proportion | 2:01 |
| Length | 680 mm |
| Width | 440 mm |
| Height | 1214 mm |
| Weight | 190 kg |
Competent execution guaranteed
Including ELMAG”‘-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
COMPRESSED AIR TECHNOLOGY WELDING TECHNOLOGY METALWORKING STONE CUTTING TECHNOLOGY WORKSHOP TECHNOLOGY POWER GENERATORS
START UP SERVICE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>