ELMAG 83141 Premium EPB 50 Motorised Ring Bending Machine Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 83141 Premium EPB 50 Motorised Ring Bending Machine
Product Information
Specifications
- Roll Diameter Above: 150 mm
- Roll Diameter Below: 150 mm
- Axis Diameter Above: 50 mm
- Axis Diameter Below: 50 mm
- Adjusting Roll Mechanical: 1 Num
- Infeed Drive Rollers: 3 Num.
- Advance Speed: 8.5 m/min
- Positioning: Vertical and Horizontal
- Drive Motor Power: 1500 W
- Voltage: 400/50 V/Hz
- Dimensions (LxWxH): 1100 mm x 800 mm x 1400 mm
- Weight: 355 kg
- Length 1100 mm
- Width 800 mm
- Height 1400 mm
- Weight 355 kg
Product Usage Instructions
Setup
Place the motorised ring bending machine on a flat, stable surface. Ensure all safety features are functional and accessible.
Operation
- a. Adjust the rollers and shafts as needed for the specific bending task.
- b. Use the control panel to set the bending parameters and speed.
- c. Engage the foot pedal to control the forward/reverse movement of the machine.
Safety Precautions
- a. Always wear appropriate safety gear, including gloves and eye protection.
- b. Do not operate the machine with loose clothing or jewelry that could get caught in moving parts.
- c. Keep hands and objects clear of the bending area during operation.
Frequently Asked Questions
Q: Can this machine bend other materials besides steel?
A: The machine is designed for bending round and tubular steel specifically. Attempting to bend other materials may damage the equipment.
Q: How do I adjust the bending speed?
A: The bending speed can be adjusted using the control panel provided. Refer to the user manual for detailed instructions on speed adjustment.
PREMIUM EPB 50
Article Number: 83141
EAN Code: 9004853831416
TECHNICAL FACTS
PRODUCT HIGHLIGHTS
Standard features
- Standard castors – hardened special steel
- Roller axles – hardened special steel
- Straightening shafts – hardened special steel
- Mechanical roller adjustment, top
- Mechanical straightening shaft adjustment
- Mobile control panel ERanalog/emergency stop
- Mobile control panel ERdigital/emergency stop
- Double foot pedal forward/reverse
- Operating instructions / CE
Special accessories
Round and tubular steel bending rollers
Competent execution guaranteed
ELMAG® – Start-up Service
- Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
- For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
- For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
Read User Manual Online (PDF format)
Loading......