ELMAG 83119 Motorised Round Bending Machine Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 83119 Motorised Round Bending Machine
Product Specifications
- Working length: 1250 mm
- Sheet thickness for prebending: 3.5 mm
- Max. sheet thickness for bending: 4 mm
- Max. upper roll diameter: 110 mm
- Bending diameter min.: 150 mm
- Motor power: 2200 W
- Voltage: 400/50 V/Hz
- Operator column forward/return flow: Yes
- Quality steel rollers: 3
- Drive rollers: 2
- Cone bender: Yes
- Wire core grooves lower roller/back roller: Yes
- Dimensions (LxWxH): 2020 mm x 850 mm x 1150 mm
- Weight: 1150 kg
Product Usage Instructions
Operating Instructions
Ensure the machine is on a stable surface. Refer to the user manual for detailed setup instructions.
Bending Process
- Adjust the sheet thickness settings according to your requirements.
- Insert the sheet metal between the rollers carefully.
- Engage the motor to start the bending process.
- Monitor the bending operation and adjust if necessary.
Maintenance
Regularly clean the machine and lubricate moving parts to ensure smooth operation and longevity.
Frequently Asked Questions
Q: Can this machine handle steel sheets?
A: Yes, the machine is designed to work with high-quality steel rollers with very high tensile strength.
Q: What is the maximum sheet thickness it can bend?
A: The machine can handle a maximum sheet thickness of 4 mm for bending.
Q: Does it come with a control panel?
A: Yes, it comes with a control panel that includes rear roller control and a digital display.
Article Number: 83119
EAN Code: 9004853831195
TECHNICAL FACTS
PRODUCT HIGHLIGHTS
Standard features
- Robust machine body and cast iron roller frames
- High quality steel rollers with very high tensile strength
- Taper bending device for tapered workpieces
- Wire insert grooves on lower and rear roller
- Operating instructions/CE
Special accessories
Induction-hardened steel rollers
- Control panel with rear roller control and digital display
Competent execution guaranteed
ELMAG® – Start-up Service
- Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances, e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
- For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
- For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>