ELMAG 83117 ASM 1550×3.5mm Motorised Round Bending Machine Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 83117 ASM 1550×3.5mm Motorised Round Bending Machine
Specifications:
- Working length: 1550 mm
- Sheet thickness for prebending: 3 mm
- Maximum sheet thickness for bending: 3.5 mm
- Max upper roll diameter: 110 mm
- Bending diameter min.: 150 mm
- Motor power: 2200 W
- Voltage: 400/50 V/Hz
- Operator column: Yes
- Quality steel rollers: 3
- Drive rollers: 2
- Includes cone bender, wire core grooves on lower roller/back roller
- Dimensions: 2320 mm (L) x 850 mm (W) x 1150 mm (H)
- Weight: 1250 kg
Product Usage Instructions
Safety Precautions
Before operating the motorised round bending machine, ensure you have read and
understood all safety guidelines provided in the manual.
Setting Up the Machine
Place the machine on a stable surface with sufficient space around it for
operation. Connect the machine to the power source.
Adjusting Parameters
Set the desired sheet thickness for prebending and bending using the controls
on the control panel. Ensure all settings are correct before proceeding.
Operating the Machine
Turn on the machine and feed the sheet metal carefully into the rollers for
bending. Use the taper bending device for tapered workpieces if needed.
Post-Operation Maintenance
After use, clean the machine and ensure all components are in good condition
for future use.
FAQ:
Q: What is the maximum sheet thickness this machine can handle?
A: The motorised round bending machine ASM 1550X3.5 MM can handle a
maximum sheet thickness of 3.5 mm for bending.
Q: Does the machine come with a control panel?
A: Yes, the machine includes a control panel with rear roller control and
digital display for ease of operation.
Q: What is the power source requirement for this machine?
A: The motorised round bending machine operates on 400/50 V/Hz power
supply.
Article Number: 83117
EAN Code: 9004853831171
TECHNICAL FACTS
PRODUCT HIGHLIGHTS
Standard features
- Robust machine body and cast iron roller frames
- High quality steel rollers with very high tensile strength
- Taper bending device for tapered workpieces
- Wire insert grooves on lower and rear roller
- Operating instructions/CE
Special accessories
Induction-hardened steel rollers
- Control panel with rear roller control and digital display
SPECIFICATIONS
| Working length | 1550 mm |
|---|---|
| sheet thickness prebending max. | 3 mm |
| sheet thickness bending max. | 3.5 mm |
| upper roll diameter | 110 mm |
| bending diameter min. | 150 mm |
| motor power | 2200 W |
| voltage | 400/50 V/Hz |
| operator column forward / return flow | Yes |
| quality steel rollers | 3 Num. |
| drive rollers (+) | 2 Num. |
| cone bender | Yes |
| wire core grooves lower roller / back roller | Yes |
| Length | 2320 mm |
| Width | 850 mm |
| Height | 1150 mm |
| Weight | 1250 kg |
ELMAG® – Start-up Service
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances,e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
COMPRESSED AIR TECHNOLOGY
WELDING TECHNOLOGY
METALWORKING
STONE CUTTING TECHNOLOGY
WORKSHOP TECHNOLOGY
POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>