ELMAG 81816 Premium WPMEH 100 2-K Hydraulic Workshop Press Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 81816 Premium WPMEH 100 2-K Hydraulic Workshop Press
Specifications:
- Press Power Max: 100 t
- Drive: Electrohydraulic drive
- Drive Speeds: Two speeds
- Hydraulic Cylinder: Laterally adjustable
- Handpump: Manual operation
- Press Table: Chain for height adjustment
- Oil Flow: 5.64 / 17.2 l/min
- Piston Speed: 7.54 / 2.47 mm/s
- Return Travel Speed: 9.06 mm/s
- Motor Power: 2200 W
- Voltage: 400/50 V/Hz
- Machine Height: 2140 mm
- Machine Length without Pump: 1350 mm
- Machine Width: 755 mm
- Inlet Length: 1100 mm
- Beam Width Inlet: 300 mm
- Inlet Height Max: 930 mm
- Machine Length with Pump: 1665 mm
- Machine Width with Pump: 865 mm
- Piston Stroke: 380 mm
- Weight: 970 kg
Product Usage Instructions
Setup:
- Ensure the press is placed on a stable and level surface.
- Connect the machine to a power source with the specified voltage.
- Adjust the press table height using the chain as needed for your workpiece.
Operation:
- Turn on the machine using the on/off control valve.
- Adjust the drive speed based on your requirements.
- Position your workpiece between the press table and cylinder piston.
- Use the handpump to apply hydraulic pressure to press your workpiece.
Frequently Asked Questions (FAQ):
Q: What should I do if the press does not operate as expected?
A: Check the power connection, hydraulic fluid levels, and ensure all
safety features are engaged before troubleshooting further.
Q: Can I use this press for heavy-duty applications?
A: Yes, the press has a maximum press power of 100 tons, suitable for
various heavy-duty tasks.
Q: How do I maintain this hydraulic workshop press?
A: Regularly check for leaks, lubricate moving parts, and follow the
maintenance schedule outlined in the user manual to ensure optimal
performance.
Article Number: 81816
EAN Code: 9004853818165
INSTRUCTION
TECHNICAL FACTS
PRODUCT HIGHLIGHTS
Standard features
- Overload safety valve
- Compression pressure gauge
- On/off control valve
- Cylinder piston, chrome-plated
- Press table with locking pin
- Operating instructions/CE
SPECIFICATIONS
press power max.| 100 t
electorhydraulic drive| Yes
---|---
two drive speeds| Yes
hydraulic cylinder laterally adjustable| Yes
manuel handpump| Yes
press table chain (height adjustment)| Yes
oil flow step 1/2| 5.64 / 17.2 l/min
piston speed step 1/2| 7.54 / 2.47 mm/s
Return travel speed| 9.06 mm/s
motor power| 2200 W
voltage| 400/50 V/Hz
machine height| 2140 mm
machine length without pump| 1350 mm
machine width| 755 mm
inlet length| 1100 mm
beam width| 300 mm
inlet height max.| 930 mm
machine length with pump| 1665 mm
machinewidth with pump| 865 mm
Piston stroke| 380 mm
Weight| 970 kg
ELMAG® – Start-up Service
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
COMPRESSED AIR TECHNOLOGY
WELDING TECHNOLOGY
METALWORKING
STONE CUTTING TECHNOLOGY
WORKSHOP TECHNOLOGY
POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>