ELMAG MFB 30 VARIO Gear Milling and Drilling Machine Owner’s Manual

ELMAG MFB 30 VARIO Gear Milling and Drilling Machine

Specifications:

• Drilling capacity in steel: Thread cutting performance
• Face mills milling capacity: End mills milling capacity
• Mandrel holding fixture (screw mandrel)
• Rotational speed 1: Rotational speed 2
• Speed gradually: Quill stroke
• T-slot width: Milling head stroke
• Mandrel radius: Milling head swivel range
• Quill distance table min./max.

Product Highlights:

• GEAR MILLING AND DRILLING MACHINE MFB 30 VARIO
• MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario

Standard configuration:

• Quick-action drill chuck B16, 1 – 16 mm
• Tapered mandrel MK 2 / B 16, IT M10
• Tightening spindle M10
• Tool kit
• Operating instructions / CE

Product Usage Instructions

1. Assembly:
   Follow the assembly instructions provided in the manual to set up the gear milling and drilling machine correctly.

2. Power Connection:
   Ensure the machine is connected to a suitable power source based on the voltage and frequency requirements provided in the specifications.

3. Tool Setup:
   Install the required tools such as the drill chuck and mandrel according to the provided guidelines.

4. Operating the Machine:
   Adjust the rotational speed, milling head swivel range, and other settings as needed for your specific operation.

5. Safety Precautions:
   Always wear appropriate safety gear such as goggles and gloves when operating the machine to prevent accidents.

FAQ :

• Q: What should I do if the machine gets jammed during operation?
  A: Stop the machine immediately, disconnect power, and clear any obstructions before attempting to restart.

• Q: Can this machine be used for cutting stone?
  A: No, this gear milling and drilling machine is designed for metalworking applications and is not suitable for stone cutting.

GEAR MILLING AND DRILLING MACHINE MFB 30 VARIO

• Article Number: 82142
• EAN Cod e: 9004853821424

TECHNICAL FACTS

• Face milling – End milling – Drilling
• Variable speed adjustment
• Digital speed display
• Emergency stop button
• Clockwise and anticlockwise rotation
• Speed regulator
• Precision micro feed
• Digital drilling depth display
• Quill fixing
• Operating lever with fixing
• Milling spindle with precision bearing
• Tightening spindle for high safety
• Smooth-running, precise cross table with T-slots and coolant channel Drilling spindle protection cover
• Drilling depth scale
• Zero-voltage release
• Machine stand available as an option

PRODUCT HIGHLIGHTS

• MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario
• With the MFB 20 Vario and MFB 20-L Vario compact milling machines and drills, precise workpiece machining is a pleasure thanks to a machine head that can be turned to any position.
• The MFB 20 Vario has been specially designed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, they cover a wide range of standard sizes in model-making and mechanical engineering. Digital displays for speed and drilling depth and continuously adjustable speed control offer optimum support.
• Standard configuration
  • Quick-action drill chuck B16, 1 – 16 mm
  • Tapered mandrel MK 2 / B 16, IT M10
  • Tightening spindle M10
  • Tool kit
  • Operating instructions / CE

SPECIFICATIONS

drilling capacity in steel| 30 mm
thread cutting performance| M18
face mills milling capacity| 80 mm
end mills milling capacity| 20 mm
mandrel holding fixture (screw mandrel)| MK 3
rotational speed 1| 50 – 750 rpm
rotational speed 2| 150 – 2250 rpm
speed gradually| continuously variable
quill stroke| 70 mm
t-slot width| 14 mm
milling head stroke| 370 mm
mandrel radius| 180 mm
milling head swivel range| ± 90 °
quill distance table min./max.| 90 – 460 mm
router table surface| 700×210 mm
---|---
table length X x Y| 425 x 220 mm
motor power| 1100 W
voltage| 230/50 V/Hz
cubature| 700x210x460 mm
length x width| 970 x 710 mm
Height| 1190 mm
Weight| 240 kg

Competent execution guaranteed

Including ELMAG®-Quality Check

• Depreservation, degreasing and de-securing Assembly until ready for use
• Oil filling of gearboxes, oil baths and central lubrication systems
• Testing of electrics, safety components and devices
• Test run on all shift and power levels
• 30-minute test run at the highest power level
• Checking and, if necessary, adjustment of machine tolerances,
• e.g. V-belt tension and spindle concentricity
• Testing of all machine functions

For lathes, in addition:

• Lathe chuck reassembly with marking of minimum tolerance
• Measurement of the spindle nose to tolerance < 0.01 mm
• Measurement of the lathe chuck
• Setting the tailstock parallelism

For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)

• Assembly of the unit, chassis assembly
• Intermediate hose assembly
• Mains plug assembly and gas hose assembly
• Connection preparation for gas or compressed air
• Control cable plug Assembly on hose assembly
• Installation & activation of water cooling unit for modular systems
• Filling with cooling liquid for liquid-cooled units
• Short test run or test welding

COMPRESSED AIR TECHNOLOGY

• WELDING TECHNOLOGY
• METALWORKING
• STONE CUTTING TECHNOLOGY
• WORKSHOP TECHNOLOGY
• POWER GENERATORS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>