BEGA 85131K3 Performance Floodlight Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 85131K3 Performance Floodlight
Product Information
Product Usage Instructions
FAQ
Instructions for use
Product Description
Safety
Overvoltage protection
Installation
Cleaning Maintenance
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 85131K3 Performance Floodlight

BEGA-85131K3-Performance-Floodlight-product

Product Information

Specifications:

Product Name: Performance Floodlight
Model Number: 85 131
Power: 10.2 W – 11.8 W
Colour Temperature: 3000 K – 4000 K
Luminous Flux: 1500 lm – 1575 lm
Colour Rendering Index (CRI): > 90
Luminous Efficiency: 93.1 lm/W – 97.7 lm/W

Product Usage Instructions

Installation:

LEDs are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.

Step 1: Place the floodlight unit onto the mounting plate as displayed in the sketch.
Step 2: Align the unit and firmly screw it onto the mounting plate.
Step 3: To adjust the beam direction, undo the joint screw (hexagon socket head wrench size 5 mm), set the desired beam direction, and tighten the joint screw with a torque of 7 Nm.
Safety Instructions:

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning should only be carried out by a qualified electrician. The manufacturer does not accept liability for damage caused by improper use or installation. Any modifications to the luminaire should be done by authorized personnel.

Overvoltage Protection:

The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components available on the manufacturer’s website.

FAQ

Q: Can I install the floodlight myself?
- A: Installation and commissioning should only be carried out by a qualified electrician to ensure safety and proper operation.
Q: What is the ideal torque for tightening the joint screw during beam direction adjustment?
- A: The ideal torque for tightening the joint screw is 7 Nm.

Performance floodlight $BEGA-85131K3-Performance-Floodlight-fig $1$$

Instructions for use

Application

Performance floodlight with mounting box. For a variety of interior and exterior lighting applications

Product Description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite or silver
Clear safety glass
Silicone gasket
The reflector surface is made of pure aluminium
BEGA Hybrid Optics®
The rotation range of floodlight is 350°
Swivel range -35°/+90°
Mounting box with 2 fixing holes
ø 4.8 mm · 67 mm spacing
2 cable entries for through-wiring of mains
supply cable ø 7-10.5 mm, max. 5 G 1.5@
Connecting terminal 2.5@
with plug connection
Earth conductor connection
BEGA Ultimate Driver®
Complies with flicker requirements in accordance with IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-280 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect
temperature-sensitive components without
switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK06
Protection against mechanical
impacts < 1 joule
CE Conformity mark
Wind catching area: 0.017 m²
Weight: 1.4 kg
This product contains light sources of energy efficiency class(es) E

Light technique

Symmetrical wide beam light distribution Half beam angle 20° For special lighting applications, an optical filter can be used to change the symmetrical light cone into a flat beam light distribution.

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage inaccordance with DIN EN 61547. To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com. The ideal protection of all electronic components installed in the luminaires is achieved by using bounce-free switching contacts such as an electronic relay (solid-state relay), e.g. BEGA 71 320.

Installation

LEDs are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Undo the hexagon socket head screw (wrench size 3 mm) up to the stop and disassemble the mounting plate. Pass the power connecting cable through the cable entry in the mounting plate. Note the position of application of the mounting plate “arrow down”. Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface. Be sure to use the gasket rings supplied. Make an earth conductor connection. Push silicone sleeves over the lines and make an electrical connection to the terminal (plug connection). For digital control please use the 2-pole plug connector DA, DA. In case this connector is not used the luminaire will be operated at full light output. Push plug into the coupler as far as it will go. Connect the floodlight unit’s green and yellow protective earth conductor to the terminal marked 1 in the mounting plate. Make sure that the gasket is positioned correctly

$BEGA-85131K3-Performance-Floodlight-fig $2$$

Place the floodlight unit onto the mounting plate as displayed in the sketch, align and screw together firmly.

Adjustment of beam direction:

Undo the joint screw (hexagon socket head wrench size 5 mm) and set the desired beam direction. Tighten the joint screw.

Torque = 7 Nm

Cleaning Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use high-pressure cleaners.

Maintenance

The connecting cable between the mounting box and floodlight has to be inspected for obvious damages and has to be replaced by a qualified electrician only.

Replacing the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools.
Disconnect the system from the power supply.

Open the floodlight:

Remove the trim ring along with the safety glass and reflector by twisting it anti-clockwise.
Replace the LED module.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
The defective glass must be replaced.
Place the trim ring with glass and reflector on the floodlight housing so that the notches in the trim ring and luminaire housing sit on top of each other.
Twist on the trim ring clockwise as far as the stop.