ELMAG 82141 Gear Milling and Drilling Machine Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 82141 Gear Milling and Drilling Machine
Article Number: 82141
EAN Code: 9004853821417
TECHNICAL FACTS
- Face milling – End milling – Drilling
- Variable speed adjustment
- Digital speed display
- Emergency stop button
- Clockwise and anticlockwise rotation
- Speed regulator
- Precision micro feed
- Digital drilling depth display
- Quill fixing
- Operating lever with fixing
- Milling spindle with precision bearing
- Tightening spindle for high-safety
- Smooth-running, precise cross table with T-slots and coolant channel
- Drilling spindle protection cover
- Drilling depth scale
- Zero-voltage release
- Machine stand available as an option
PRODUCT HIGHLIGHTS
MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario
With the MFB 20 Vario and MFB 20-L Vario compact milling machines and drills,
precise workpiece machining is a pleasure thanks to a machine head that can be
turned to any position.
The MFB 20 Vario has been specially designed for small milling and drilling
jobs. With a drilling capacity in steel of 20 mm and a face milling capacity
of 63 mm, they cover a wide range of standard sizes in model-making and
mechanical engineering. Digital displays for speed and drilling depth and
continuously adjustable speed control offer optimum support.
Standard configuration
- Quick-action drill chuck B16, 1 – 16 mm
- Tapered mandrel MK 2 / B 16, IT M10
- Tightening spindle M10
- Tool kit
- Operating instructions / CE
SPECIFICATIONS
SPECIFICATIONS
drilling capacity in steel| 20 mm
thread cutting performance| M14
face mills milling capacity| 63 mm
end mills milling capacity| 16 mm
mandrel holding fixture (screw mandrel)| MK 2
rotational speed 1| 50 – 1125 rpm
rotational speed 2| 100 – 2250 rpm
speed gradually| continuously variable
quill stroke| 50 mm
t-slot width| 12 mm
milling head stroke| 375 mm
mandrel radius| 184 mm
milling head swivel range| ± 90 °
quill distance table min./max.| 0 – 375 mm
router table surface| 700×180 mm
---|---
table length X x Y| 480 x 175 mm
motor power| 600 W
voltage| 230/50 V/Hz
cubature| 700x180x375 mm
length x width| 945 x 570 mm
Height| 935 mm
Weight| 113 kg
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjusting machine tolerances, e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition
- Lathe chuck reassembly with the marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding