ELMAG 83102 AS-M Motorised Round Bending Machine Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 83102 AS-M Motorised Round Bending Machine
- AS-M 1550×2,2 mm
- Article Number: 83102
- EAN Code : 9004853831027
TECHNICAL FACTS
- Optimal handling
- One-man operation
- Upper and lower roller adjustable, movable rear roller
- Upper roller detachable from the front, easy removal of the workpiece
PRODUCT HIGHLIGHTS
AS manual round bending machines for stand-alone production
AS and AS-M round bending machines are designed for rolling fine and medium
thickness sheet steel, stainless steel and aluminium. They enable controlled
production of sheet bending radii and production of semi-finished products
such as pipes, pipe sockets and columns, gutters and half shells, container
shells, ventilation pipes and round insulation.
Advanced options
All AS and AS-M models are equipped with a bending device for tapered
workpieces and wire insert grooves for round and spring steel wire.
Motorised AS-M
The motor-driven AS-M models are designed for light to medium and serial
rolling jobs. They provide stable, automatic forward and reverse feed and are
easy to control via foot pedals. Adjustment of the rear roller is by
handwheel.
Automation
All AS-M models can be upgraded with a feed drive on the rear roller and with
a control panel with digital display (high-precision position measurement).
Application examples
- Plumbers
- Ventilation
- Tank construction
- Insulation companies
- Façade construction
- Pipeline construction
- Installers
- Metalworking shops
- Body shops
- Garages
- Mechanical engineering
- Training workshops
Standard features
- Analogue AS models
- Powerful geared motor 1,100 W with motor brake
- Mobile control column, double foot pedal for sheet metal advance or retraction
- The emergency stop button on the control column
- Safety line with emergency stop
Special accessories
- Induction-hardened steel rollers, a very long service life
- Rear roller feed drive 370 W
- Control panel with rear roller control and digital display
SPECIFICATIONS
SPECIFICATIONS
Drive mode| motorised
Working length| 1550 mm
sheet thickness pre-bending max.| 2.2 mm
sheet thickness bending max.| 2.5 mm
upper roll diameter| 90 mm
bending diameter min.| 130 mm
motor power| 1100 W
voltage| 400/50 V/Hz
operator column forward / return flow| Yes
quality steel rollers| 3 Num.
drive rollers (+)| 2 Num.
cone bender| Yes
wire core grooves lower roller / back roller| Yes
Length| 2600 mm
Width| 800 mm
Height| 1130 mm
Weight| 600 kg
Competent execution guaranteed
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjusting machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with the marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding