ELMAG 82812 Hydraulic Vice MP 200 V Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 82812 Hydraulic Vice MP 200 V
Specifications
- Chuck jaw width: 200 mm
- Chuck jaw height: 63 mm
- Span: 0 – 310 mm
- Clamping force: 0 – 62 kN
Product Information
- The Hydraulic Vice MP 200 V is a robust and reliable tool designed for mechanical-hydraulic clamping with a high clamping force hold-down system. Constructed from high-strength nodular cast iron with a tensile strength of 600 N/mm2, this vice ensures durability and precision in various industrial applications.
- Featuring hardened and ground guideways with a hardness of 45 HRC, as well as hardened and ground interchangeable clamping jaws, the vice offers exceptional performance and longevity.
- The quick clamping mechanism with clamping range adjustment allows for efficient operation, while maintaining precision and parallelism within 0.02 mm. The vice also provides high clamping repeatability for consistent results.
Product Usage Instructions
Setup and Installation
- Place the Hydraulic Vice MP 200 V on a stable work surface.
- Ensure the chuck jaw width and height are suitable for the workpiece.
- Adjust the span and clamping force according to the requirements of the task.
Clamping Procedure
- Open the clamping jaws and position the workpiece between them.
- Use the quick clamping mechanism to secure the workpiece in place.
- Verify that the workpiece is securely held before proceeding with the task.
Maintenance
- Regularly clean the vice to remove any debris or contaminants.
- Check for any signs of wear on the clamping jaws and guideways.
- Lubricate moving parts as needed to ensure smooth operation.
FAQ
-
Q: What is the maximum clamping force of the Hydraulic Vice MP 200 V?
A: The maximum clamping force is 62 kN, with an additional down effect of 50% tension. -
Q: What is the weight of the Hydraulic Vice MP 200 V?
A: The vice weighs approximately 90 kg, providing stability during operation.
HYDRAULIC VICE MP 200 V
with hold-down
system clamping force 62 KN
Article Number: 82812
EAN Code: 9004853828126
Dimension
TECHNICAL FACTS
- Mechanical-hydraulic clamping, high clamping force
- hold-down system (additional pull-down NZ 50% of the clamping force) for maximum safety
- High-strength nodular cast iron, tensile strength 600 N/mm2 Hardened and ground guideways, hardness 45 HRC
- Hardened clamping jaws, ground, interchangeable
- Quick clamping with clamping range adjustment
- Precision and parallelism 0.02 mm
- High clamping repeatability
SPECIFICATIONS
Chuck jaw width| 200 mm
Chuck jaw height| 63 mm
Span| 0 – 310 mm
Clamping force| 0 – 62 kN
Max. clamping force| 72 kN
---|---
additional down effect 50 % tension| 50 kN
Weight| 90 kg
COMPRESSED AIR TECHNOLOGY WELDING TECHNOLOGY METALWORKING STONE CUTTING TECHNOLOGY WORKSHOP TECHNOLOGY POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>