BEGA 45 485.1 Pendant luminaire for indoor use Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 45 485.1 Pendant luminaire for indoor use
Specifications
Product Usage Instructions
FAQ
Dimensions
Instructions for use
Product Description
Installation
Relamping Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 45 485.1 Pendant luminaire for indoor use

Specifications

Luminaire efficiency: 88%
Lamp Luminaire with screw base: E 27
Lamp output max: 60 W
Energy efficiency class: E

Product Usage Instructions

The installation and operation of this luminaire are subject to national safety regulations. Only a qualified electrician should carry out the installation and commissioning. The manufacturer is not liable for damage due to improper use or installation. Any modifications to the luminaire should be done by a responsible person qualified for such modifications.

Suspend the luminaire from the ceiling hook.
Make earth connection and electrical connection to the terminals.
Insert the lamp into the lampholder.
Unscrew the glass cover and lift it.
Place the glass onto the glass support and adjust it accordingly.
Screw the glass cover back on.
Press the canopy against the ceiling. Adjust the clamping effect for different cable diameters using the knurled nut at the lower part of the canopy.

FAQ

Q: Where can I find detailed technical and lighting data for the lamps?
A: Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Q: What are some common spare parts available for this product?
A: Some common spare parts include spare glass, LED lamps of different colour temperatures (2700 K and 3000 K), lampholder, canopy, and cover cap. The respective part numbers are provided for easy identification and replacement.

Pendant luminaire for indoor use
Suspension pour utilisation à l’intérieur

Dimensions

BEGA-45-485-1-Pendant-luminaire-for-indoor-use-FIG-2

Instructions for use

Application

Pendant luminaire · indoor luminaire for free-radiating and uniform light with hand-blown opal glass, satin matt and metal housing.

Lamp

Luminaire with screw base E 27
Lamp output max. 60 W
This product contains light sources of energy efficiency class E Supplied lamp
BEGA LED lamp 13548
LED 7 W · 805 lm · 2700 K dimmable
Supplied lamp
BEGA LED lamp 13586
LED 7 W · 805 lm · 3000 K dimmable
Luminaire efficiency: 88%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product Description

Metal housing and canopy finish colour white
Hand-blown opal glass, satin matt
Cable pendant · Sheath cable white 3 × 0,75@ with 1 steel wire
Overall length of luminaire approx. 1950 mm
Connection terminal 2.5@
Earth conductor connection
Lampholder E 27
Safety class I
– Conformity mark
Weight: 1.4 kg

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

Suspend the luminaire from the ceiling hook.
Make earth connection and electrical connection to the terminals.
Insert the lamp into the lampholder.
Unscrew the glass cover and lift it.
Place glass onto the glass support and adjust it accordingly.
Screw the glass cover onto the glass.
Press the canopy against the ceiling.
The clamping effect for different cable diametres can be adjusted by the knurled nut at the lower part of the canopy.

Shortening of flex suspension

The flex suspension can only be shortened at the canopy end.
Remove terminals from the cable.
Loosen the fixing screw at the hanger, pull out the steel wire and loosen the screws from the cable collar.
Shorten the cable to the desired length and strip end approx. 10 cm.
Please consider these when cutting the cable to the required length.
Place the cable back into the cable collar and tighten both screws. Make sure that approx. 5 mm of the cable coating protrudes out off the collar.
Lead the steel wire through the little hole in the hanger and lead it back through the fixing terminal. Pull the steel wire tight and fix it with a screw.
Connect wires to the terminals and make sure to connect the steel wire to the earth terminal.

Relamping Maintenance

Disconnect the electrical installation.
To clean the luminaire and to change the lamp unscrew the glass cover and lift it.
Take off the glass.
Clean glass and luminaire.
Use only solvent-free cleansers.
Change the lamp.

Spares