SUNGROW SBH100 High Voltage LFP Battery Installation Guide

SUNGROW SBH100 High Voltage LFP Battery

NOTICE For safety instructions, please refer to the last section of this guide.

Product Introduction

Scope of Delivery

Major Components:

Spare parts:

Mounting location

Installation Tools

Mounting

Terminal Description

Electrical Connection Overview

PE Cable

Battery power Cable

Communication Connector

• Secure the power cables and the communication cables separately using cable ties and ensure a U-curve in the cables to reduces the risk of water flowing into the battery along the cables.

Top Cover Assembling

Power ON

LED Indicator

SAFETY WARNINGS

1. Contents may be periodically updated or revised due to product development. The information in this guide is subject to change without notice. In no case shall this guide substitute for the user manual or related notes on the device.
2. Make sure to read over, fully understand and strictly follow the detailed instructions of the user manual and other related regulations before installing the equipment. The user manual can be downloaded by visiting the website at http://support.sungrowpower.com/; or it can be obtained by scanning the QR code on the side of the equipment or the back cover of this guide.
3. All operations can be performed only by qualified personnel, that must be trained for installation and commissioning of electrical system, as well as dealing with hazards, have knowledge of the manual and of the local regulations and directives.
4. Before installation, check that the package contents are intact and complete compared to the packing list. Contact SUNGROW or the distributor in case of any damaged or missing components.
5. The cable used must be intact and well insulated. Operation personnel must wear proper personal protective equipment (PPE) all the time.
6. Any violation could result in personal death or injury or device damage, and will void the warranty.

Safety
The battery has been designed and tested strictly according to international safety regulations. Read all safety instructions carefully prior to any work and observe them at all times when working on or with the battery. Incorrect operation or work may cause:

• injury or death to the operator or a third party;
• damage to the battery or other properties.

The warning label on the battery body are as follows.

• Users may also attach other warning signs as per the requirements of the local standards or installation specifications.

EU Declaration of Conformity
within the scope of the EU directives
Low Voltage Directive 2014/35/EU (LVD)
Electromagnetic compatibility 2014/30/EU (EMC)
Restriction of the use of certain hazardous substances 2011/65/EU and 2015/863/EU (RoHS)

The manufacturer Sungrow Power Supply Co., Ltd, China hereby confirms that the product SBH100/SBH150/ SBH200/SBH250/SBH300/SBH350/SBH400 complies with the essential requirements and other relevant provisions of Directives 2014/35/EU, 2014/30/EU, 2011/65/EU, 2015/863/EU. The full EU Declaration of Conformity can be found at https://support.sungrowpower.com/PdfDetail?id=1744327691719880706.
The communication module that comes with the inverter and the technical parameters of wireless communication are listed in the table below. The model of the communication module actually delivered shall prevail. The EU Declaration of Conformity for the communication module can be found at support.sungrowpower.com.

Manufacturer:
Sungrow Power Supply Co., Ltd.
No 1699. Xiyou Road,Hefei 230088.P.R.China
For EU only
EU/EEA Importer: Sungrow Deutschland GmbH
Balanstral1e 59, 81541 Miinchen, Germany

DANGER
Risk of explosion

• Do not subject the battery to any strong force.
• Do not mechanically damage the battery (pierce, deform, strip down, etc.)
• Do not heat the battery or dispose of the battery in a fire.
• Do not install the battery in potentially explosive environments.
• Do not soak the battery in water or expose it to moisture or liquids.

DANGER
Risk of fire

• Do not expose the battery to temperatures in excess of 60°C.
• Do not place the battery near a heat source, such as direct sunlight, a fireplace, a thermally uninsulated wall exposed to sunlight, hot water, or a heater.
• Keep sources of ignition such as sparks, flames, and smoking materials away from the battery.

DANGER
Risk of electric shock

• Do not disassemble the battery.
• Do not handle a wet battery or use wet tools.
• Do not soak the battery in water or expose it to moisture or liquids.
• Keep the battery away from children and animals.
• Wear suitable clothing, guards and gloves to prevent you from direct contact with the DC voltage.
• Use insulated tools during working with battery.
• Set aside metal jewelry before working on the DC circuit.

NOTICE
Comply with local standards for use with the battery.

More information in the QR code or at http://support.sungrowpower.com/

SUNGROW
Sungrow Power Supply Co., Ltd.
www.sungrowpower.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>