LOVMOR VVSD36-E anity Sink Drawer Base Cabinet Instruction Manual
- June 17, 2024
- LOVMOR
Table of Contents
Vanity Sink Drawer Base Cabinet
Instruction Manual
MODEL: VSD36-E
VVSD36-E anity Sink Drawer Base Cabinet
| PART | DESCRIPTION |
|---|---|
| A1 | Box side panel – left |
| A2 | Box side panel – right |
| B | Box bottom panel |
| C | Box back panel |
| D | Face frame |
| E | Toe kick panel |
| F | Drawer face panel |
| G1 | Drawer side panel – left |
| G2 | Drawer side panel – right |
| H | Drawer bottom panel |
| I | Drawer back panel |
| J | Door panel |
CAUTION
- Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
- The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
- Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended.
- Do not tighten all the screws until all the adjacent parts have been properly connected. Please do not throw away extra screws.Please refer to the actual product for the screw hole position.
HARDWARE CONTENTS
AA Glide and runner profile x 4
BB Adjustable drawer clips x 4
CC Soft – close hinge x 4
Be careful the length of the screws.
DD Wood corner block x 4
EE Corner brace x 13
GG 1” Flat head Phillips screw x 4
HH Rubber bumper x 12
TOOLS REQUIRED (NOT INCLUDED)
INSTALLATION OVERVIEW
Insert the drawer on the extended runner. To secure the drawer clips with the runner, push the drawer in. Upon successful locking, a click can be heard.
To level the drawer, use the green spur gears 1 to adjust drawer left and right, the green spur gears 2 to adjust drawer up and down, and the green spur gears 3 to adjust drawer inside and outside.
Ensure that the hook on each runner profile fits into the corresponding holes on the drawer back panel.
To take the drawer out, push the green clips at the same time to unlock drawer clips.
If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge.
Dear customers,
Thank you for purchasing our product. If you require assistance, please
contact the customer service team at the retailer where you purchased the
product. The customer service team will be happy to assist you.