BEGA 507141 Recessed Ceiling Light Instruction Manual
- June 1, 2024
- BEGA
Table of Contents
BEGA 507141 Recessed Ceiling Light
Product Information
Specifications:
- Lamp Module connected wattage: 8.5 W
- Luminaire connected wattage: 10.4 W
- Rated temperature: 25-35°C
- Ambient temperature: max 35°C
- Colour temperature: 2700 K and 3000 K
- Colour rendering index (CRI): > 90
- Luminous flux: 1155 lm (2700 K), 1200 lm (3000 K)
- Luminous efficiency: 55.9 lm/W (2700 K), 58.1 lm/W (3000 K)
Product Usage Instructions
Safety:
The installation and operation of this luminaire must adhere to national
safety regulations. Only a qualified electrician should carry out installation
and commissioning to avoid damage due to improper use or installation.
Overvoltage Protection:
The luminaire’s electronic components are protected against overvoltage
according to DIN EN 61547. For additional protection against transients, it is
recommended to use separate overvoltage protection components available on the
manufacturer’s website.
Installation:
- The luminaire housing should not be installed in heat-insulating material.
- Fix the luminaire using 2 adjustable claws.
- Avoid touching the LEDs directly during installation or relamping.
- Push the external LED power supply unit and luminaire housing into the ceiling cut-out.
- Hand-tighten screws of claw fasteners evenly.
- Insert the glass with mounted reflector by turning it clockwise into the luminaire housing.
- Ensure the gasket is positioned correctly and mount the ceiling frame ring onto the installation ring of the housing.
Frequently Asked Questions (FAQ):
-
Q: Can I install the luminaire in heat-insulating material?
A: No, the luminaire housing must not be installed in heat-insulating material to prevent overheating. -
Q: Are replacement parts available for this product?
A: Yes, spare parts including spare glass, LED power supply unit, LED modules in different colour temperatures, trim ring, and reflector are available for this product.
Application
Pivoting recessed ceiling luminaire · indoor luminaire partially satin matt crystal glass inside and aluminium alloy housing. Efficient luminaires for adjustable, brilliant light in the residential living space and for use in many other ranges of interior illumination. For installation into ceilings with a shallow depth in interior areas.
Product description
- Recessed ceiling luminaire »ACCENTA VARIO« Die-cast aluminium housing
- Crystal glass, partially satin matt inside
- Reflector of anodised pure aluminium
- Ceiling trim ring made of metal, colour white
- Recessed opening ø 95 mm
- Required installation depth 60 mm
- Fixing is achieved by using 2 adjustable claws
- External LED power supply unit 220-240 V 0/50-60 Hz
- DC 176-280 V
- DALI controllable
- Number of DALI addresses: 1
- A basic isolation exists between power cable and control line
- Safety class II
- – Safety mark
- – Conformity mark
- Weight: 0.6 kg
- This product contains light sources of energy
- efficiency class(es) E
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage by DIN EN 61547. To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.
Lamp
- Module connected wattage 8.5 W
- Luminaire connected wattage 10.4 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 35 °C
50 714.1 K27
- Module designation LED-0923/927
- Colour temperature 2700 K
- Colour rendering index CRI > 90
- Module luminous flux 1155 lm
- Luminaire luminous flux 581 lm
- Luminaire luminous efficiency 55,9 lm / W
50 714.1 K3
- Module designation LED-0923/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 1200 lm
- Luminaire luminous flux 604 lm
- Luminaire luminous efficiency 58,1 lm / W
Installation
- Luminaire housing must not be installed in heat-insulating material.
- The recessed opening will be covered by the attachement of the installation ring.
- Fixing of the luminaire is achieved by using 2 adjustable claws.
- LEDs are high-quality electronic components! Please avoid touching them directly during installation or relamping.
Installation into false ceilings
- A recessed opening of Ø 95 mm is necessary to accept the luminaire housing. Free space depth min. 60 mm.
- The claws catch the panel from the reverse side.
- If minimum thickness of the panel is less than 3 mm it must be reinforced from the reverse side.
- Maximum thickness of the panel must be no more than 20 mm.
- The notch in the installation ring indicates the direction of maximum pivoting range (35°) of the luminaire housing.
- Remove glass with reflector from luminaire housing by turning counter-clockwise.
- The electrical connection must be made on site in the appropriate safety class on the LED power supply unit connecting cable. A distribution box must be used.
- Ensure the correct assignment of the connecting cable. Establish the mains connection on the brown (L) and blue (N) wires.
- The connection of the control cables is achieved by means of the both leads marked with – DALI.
- In case these leads are not used the luminaire will be operated at full light output.
- Push external LED-power supply unit and luminaire housing into ceiling cut-out.
- Luminaire housing and external LEDpower supply unit must not be installed in heat-insulating material.
- Hand-tight screws of claw fasteners evenly.
- Insert glass with mounted reflector by turning it clockwise into luminaire housing.
- Make sure that gasket is positioned correctly.
- Mount ceiling frame ring (magnetic) onto installation ring of the housing.
DIMENSION
Cleaning · Maintenance
- Clean luminaire regularly with solvent-free cleansers from dirt.
- Defective glass must be replaced.
Replacement of the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
- Disconnect from main supply.
- Remove glass with reflector from housing by turning it counter-clockwise.
- Pull ceiling frame ring off the installation ring of the pivoting housing.
- Please follow the installation instructions for the LED module.
- Check gasket. Screw in glass with mounted reflector by turning it clockwise into luminaire housing.
- Mount ceiling frame ring onto installation ring of the housing.
- Defective glass must be replaced.
Spares
- Spare glass 11 003 006 410 RG
- LED power supply unit DEV-0434/250
- LED module 2700 K LED-0923/927
- LED module 3000 K LED-0923/930
- Trim ring 72 009 801 L
- Reflector 76 001 209
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden
info@bega.com
www.bega.com