BEGA 85 000 RGBW Garden Floodlight Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

Dimension
Instructions for use
Download app
Accessories
Customers Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 85 000 RGBW Garden Floodlight

BEGA 85 000 RGBW Garden Floodlight

Dimension

Instructions for use

Application

Portable floodlight BEGA UniLink® Play with earth spike and 1,7m connecting cable with plug connector and with integrated colour light control.

The additive colour mixing RGBW is carried out via the free BEGA Smart app. For the effective illumination of plants and smaller trees or objects in private gardens. Connecting the floodlight requires a power supply unit (71321), which must be ordered separately.

BEGA UniLink® Play is a system for smart garden lighting that is controlled via app, remote control or automation. All connection cables and components are installed above ground in the area of use. Thanks to the IP 67 standard, they are weather resistant year-round and highly durable. After successful electrical connection, they can be configured in the BEGA Smart app.

Lamp

Module connected wattage 9.4 W
Luminaire connected wattage 10.2 W
Rated temperature ta=25 °C
Ambient temperature ta max=30 °C
Voltage 48 V = DC
Module designation LED-1472/RGBW
Colour temperature of the white LED 4000 K
Luminaire luminous flux 510 1m
Luminaire luminous efficiency 50 1m/W

Light technique

Broad spread light distribution.
Half beam angle 70

Safety

The installation and operation of this luminaire are subject to national safety regulations.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Product description

Luminaire housing made of cast aluminium
BEGA Unidure® coating technology
Earth spike made of glass fibre reinforced
synthetic material
Colour graphite
Reflector surface made of pure aluminium
Synthetic cover with optical structure
Swivel range -90°/+90°
Tool-free plug-on shield made of synthetic
material, rotation range -60°/+60°
Integrated colour light control for switching,
dimming and colour change (RGBW)
Data matrix code for convenient configuration
via smartphone or tablet
Radio frequency 2.4 GHz
Maximum output +6 dBm
Zigbee 3.0 and Bluetooth 5.0
Status LED
1,7m connecting cable
with BEGA UniLink® Play plug
Protection class IP 67 when plugged in and
screwed in place
Luminaire housing:
Safety class III
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK05
Protection against mechanical
impacts < 0.7 joule
– Conformity mark
Weight: 0.55 kg

Range

The Zigbee radio range between individual devices is usually 30m, with ambient conditions playing a decisive role.
Bluetooth generally has a range of 12m, whereby environmental conditions and the end device used (e.g. smartphone) play a decisive role.

IMPORTANT:

The separately enclosed data matrix code labels are identical to the print on the product. Please save these labels with the assigned specifications for the installation site (room description, location, etc.) with your documentation (e.g. instructions for use top of Page 1).

Installation

Press the luminaire with earth spike vertically into the soil until stability is achieved. If necessary, compact soil around the earth spike.

The maximum wattage for the luminaires connected to the power supply unit 71321 is 100W.

When the power supply unit is fully loaded, the maximum cable length between the luminaire and the power supply unit must not exceed 100m.

Insert the plug of the floodlight into the plug contact of the power supply unit, Smart Link, distribution box or extension cable and hand tighten.

Do not use tools for the tightening or loosening of the screw connections.

Like all connection cables and other components, the colour light control integrated in the connecting cable is positioned above ground.

Please note: This positioning influences the wireless range.

Adjust the floodlight:
Undo hexagon socket screws (wrench size 2mm) and set the desired beam direction. Tighten the hexagon socket screws evenly

Maintenance

The connecting cable must be checked for external damage and may only be replaced by a qualified electrician.

Commissioning

For successful configuration, the luminaire should start in its factory settings.

This status is indicated by the green flashing status LED.

If the installation is not carried out correctly, or access via the BEGA Smart app is no longer possible, the floodlight should be reset to factory settings.

To do so, switch the supply voltage on and off 5 times.

The reset is confirmed when the connected luminaire flashes five times. Install and start the BEGA Smart app.

Download app

| | | |
---|---|---|---|---

bega.com/begasmart-ios

|

bega.com/begasmart-android

Select “RGBW garden floodlight” in the app and follow the instructions provided.

Cleaning · Maintenance

Clean dirt and debris from the luminaire regularly with a clean, soft, lint- free cloth that is kept damp throughout the cleaning. If possible, please use water for this, adding a little commercial dishwashing detergent. For lacquered surfaces we recommend the use of BEGA Lacquer Care Set 71 179. Cleaning agents containing solvents and high-pressure cleaners are unsuitable for cleaning and maintenance.

Replacing the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective synthetic diffuser must be replaced. Close the luminaire.

EU Declaration of Conformity

BEGA Gantenbrink- Leuchten KG hereby declares that the radio system type 85 000 complies with Directive 2014/53/EU (RED).
The complete text of the EU Declaration of Conformity is available at the following Internet address:
https://www.bega.com/conf/de/85000

Explanation of symbols

Caution, risk of electric shock

Conformity mark

Dispose of the device in an environmentally friendly manner

Zigbee 3.0-certified

Status display of the LED

short = ¼ second
long = 1¼ seconds
very long = 9 seconds the status displays deactivate after 180 seconds

Behaviour	Status
short on · short off · short on · long off	Network access possible via

scanning the data matrix code
short off · short on · short off · long on| Attempts to access the network by scanning the data matrix code
long on · short off · long on| Network access approved
long off · short on · long off| Network access
5s on · off| Network created
long off · long on| Network is being created
very long off · short on| No network available

Accessories

71 321 BEGA UniLink® Play power supply unit Primary: 220V-240V y 50/60Hz Secondary: 48 V DC · 0-100 W
71 322 BEGA UniLink® Play Extension cable 5m
71 323 BEGA UniLink® Play Extension cable 10m
71 324 BEGA UniLink® Play Extension cable 20m
71 325 BEGA UniLink® Play Five-way distribution box
71 326 BEGA UniLink® Play Two-way distribution box
10 526 Remote control ONE
13 569 Remote Control PRO