BEGA 89758.1 Ceiling and Wall Luminaire For Indoor Use Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 89758.1 Ceiling and Wall Luminaire For Indoor Use
Product Usage Instructions
Application
Lamp
Product Description
Safety
Installation
Dimension
Relamping Maintenance
Spares Parts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 89758.1 Ceiling and Wall Luminaire For Indoor Use

BEGA-89758.1-Ceiling-and-Wall-Luminaire-For-Indoor-Use-
Product

Specifications

Luminaire efficiency: 41%

Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product Usage Instructions

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning must only be carried out by a qualified electrician. The manufacturer does not accept liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Spares

Spare parts available:

Spare glass
LED lamp 2700 K
LED lamp 3000 K
Lampholder

FAQ

Q: Can I install the luminaire myself?
A: No, installation and commissioning must only be carried out by a qualified electrician.
Q: Where can I find technical data for the lamps?
A: Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Ceiling and wall luminaire for indoor use.

Application

Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt and metal housing, for all lighting tasks.
They are ideal for places where a soft and uniform lighting distribution is required.
Luminaire with a high protection class.

Lamp

Luminaire with screw base E 27
Lamp output max. 2 × 60 W
This product contains light sources of energy efficiency class E

Supplied lamp

2 × BEGA LED lamp 13548
LED Retrofit 7 W · 805 lm · 2700 K dimmable

Supplied lamp

2 × BEGA LED lamp 13586
LED Retrofit 7 W · 805 lm · 3000 K dimmable
Luminaire efficiency: 41%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product Description

Metal housing, finish colour white
Hand-blown opal glass, satin matt, with sliding-bolt closure
2 mounting holes ø 5.5 mm
Distance apart 187,9 x 68,4 mm
2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@
Connection terminal 2.5@
Earth conductor connection
Lampholder E 27
Safety class I
Protection class IP 44
Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK05
Protection against mechanical
impacts < 0.7 joule
– Safety mark
– Conformity mark
Weight: 3.4 kg

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

Lead mains supply cable through the cable entry into the luminaire housing.
Notice the position of the application »arrow down« when installed on the wall.
Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets.
Make an earth conductor connection.
Push silicone sleeves over the lines and make an electrical connection.
Insert lamps.
Place glass into the luminaire housing with sliding bolt glass closure and observe that the holding spring bolts fit into the notches of the glass.

IMPORTANT!

The glass must be turned clockwise past the first instance of palpable spring resistance.
By continuing to turn the glass, the glass retaining spring enters the “resting zone” of the glass. The end position of the glass is reached via a palpably firm stop.
Thus, you reach a safe and vibration-resistant holding of the glass.
To release the glass from the luminaire housing, turn it counterclockwise.