RENOGY RSP400SB Portable Solar Blanket User Manual

June 1, 2024
Renogy

Renogy
400watt Portable Solar Blanket
RSP400SB
VERSION A0

RENOGY RSP400SB Portable Solar Blanket

USER MANUAL

Before Getting Started

The User Manual provides important operation and maintenance instructions for Renogy 400watt Portable Solar Blanket (RSP400SB). Please read the User Manual carefully before operation and save it for future reference. Failure to observe the instructions or  precautions in the User Manual can result in electrical shock, serious injury, or death, or can damage solar blanket, potentially rendering itinoperable.

  • Renogy ensures the accuracy, sufficiency, and the applicability of information in the user manual at the time of printing due to continual product improvements that may occur.
  • Renogy assumes no responsibility or liability for personal and property losses, whether directly and indirectly, caused by the user’s failure to install and use the product in compliance with the user manual.
  • Renogy is not responsible or liable for any failure, damage, or injury resulting from repair attempts by unqualified personnel, improper installation, or inappropriate operation.
  • The illustrations in the user manual are for demonstration purposes only. Details may appear slightly different depending on product revision and market region.
  • Renogy reserves the right to change the information in the user manual without notice. For the latest user manual, visit renogy.com.

Disclaimer
Renogy 400watt Portable Solar Blanket (RSP400SB) User Manual © 2023 Renogy. All rights reserved.
RENOGY and  are registered trademarks of Renogy.

  • All information in the user manual is subject to copyright and other intellectual property  rights of Renogy and its licensors. The user manual may not be modified, reproduced, or copied, in whole or in part, without the prior written permissions of Renogy and its licensors.
  • The registered trademarks in the user manual are the property of Renogy. The unauthorized use of the trademarks is strictly prohibited.

Symbols Used

The following symbols are used throughout the user manual to highlight important information.
WARNING: Indicates a potentially dangerous condition which could result in injury or death.
CAUTION: Indicates a critical procedure for safe and proper installation and operation.
NOTE: Indicates an important step or tip for optimal performance.

General Safety Information

WARNING

  • DO NOT disassemble the unit or remove any attached components.
  • DO NOT puncture, drop, crush, penetrate, shake, strike, or step on unit.
  • DO NOT open, dismantle, repair, tamper with, or modify unit.
  • DO NOT place the unit on a surface constructed from combustible material.
  • DO NOT expose unit to direct flame or heat sources.
  • Please keep unit out of reach of children unless supervised by an adult.
  • Please keep unit away from explosives and corrosive substance

CAUTION

  • DO NOT step, walk, stand or jump on the unit. ocalized heavy loads may cause damage on solar cell, which will ultimately compromise the performance of the unit.
  • DO NOT band the unit, or the panel will be broken.
  • DO NOT immerse the unit in water.
  • Dispose of the unit according to the local recycling and environmental regulations.

Package Contents

  • 1 x Renogy 400watt Portable Solar Blanket (RSP400SB)
  • 1 x Case
  • 1 x User Manual

Specifications

Gener al

Model| RSP400SB
Dimensions (fold)| 22 x 21 x 3 in / 559  x 533  x 76 mm
Dimensions (unfold)| 101.3x 41.6 x 0.24 in / 2575  x 1058  x 6 mm
Weight| 26 lbs. / 12 kg (Approximately)
Operation Temperature| -4°F to 149°F / -20°C to 65°C
Solar P anel
Max Power at STC| 400W
Open-Circuit Voltage| 42.3V
Short-Circuit Current| 11.8A
Optimum Operating Voltage| 36V
Optimum Operating Current| 11.1A
Cell Type| Monocrystalline Silicon
Connector| MC4

Operation

How to charge power station

  • Place a solar blanket under direct sunlight. Steer clear of objects that can shade the solar panel and slow down the charging process.
  • Connect the solar connectors of the solar blanket with the solar charge cable (sold seperatly), then Connect DC input port of power station.

RENOGY RSP400SB Portable Solar Blanket - How to charge power
station

The solar charge time is highly dependent on the solar irradiance and the ambient temperature.
The operating voltage of the solar blanket shall exceed the minimum DC input voltage of power station, and the open circuit voltage shall NOT exceed the maximum DC input voltage of power station.

How to charge battery

  • Connect solar blanket to the PV Terminals of a charge controller (sold sperately.)
  • Connect the BATT Terminals of the charge controller to battery using tray cables (sold seperately)
  • Set the charging paremeter on charge controller, solar blanket is ready to charge the battery.

RENOGY RSP400SB Portable Solar Blanket - How to charge
battery

How to connect RSP400SB in series/parallel

  • To expand the power output, RSP400SB can be connected either in series or parallel.

  • Connect RSP400SB in series.
    RENOGY RSP400SB Portable Solar Blanket - How to connect RSP400SB
in

  • Connect RSP400SB in parallel.

Renogy Support

To discuss inaccuracies or omissions in this quick guide or user manual, visit or contact us at:

renogy.com/support/downloads

contentservice@renogy.com

| Questionnaire Investigation
RENOGY RSP400SB Portable Solar Blanket - Qr Codehttps://forms.gle/gRrrnp
hsmUmdAGyJ6

---|---

To explore more possibilities of solar systems, visit Renogy Learning Center at:

renogy.com/learning-center

For technical questions about your product in the U.S., contact the Renogy technical support team through:

| renogy.com/contact-us
---|---
| 1(909)2877111

For technical support outside the U.S., visit the local website below:

Canada ca.renogy.com
Australia au.renogy.com
South Korea kr.renogy.com
United Kingdom uk.renogy.com
China www.renogy.cn
Japan renogy.jp
Germany de.renogy.com
Other Europe eu.renogy.com

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Renogy Empowered
Renogy aims to empower people around the world through education and distribution of DIY-friendly renewable energy solutions.
We intend to be a driving force for sustainable living and energy independence.
In support of this effort, our range of solar products makes it possible for you to minimize your carbon footprint by reducing the need for grid power.

Live Sustainably with Renogy
Did you know? In a given month, a 1 kW solar energy system will…

| Save 170 pounds of coal from being burned
---|---
| Save 300 pounds of CO2 from being released into the atmosphere
| Save 105 gallons of water from being consumed

Renogy Power PLUS
Renogy Power Plus allows you to stay in the loop with upcoming solar energy innovations, share your experiences with your solar energy journey, and connect with like-minded people who are changing the world in the Renogy Power Plus community.

@Renogy Solar @renogyofficial @Renogy

Renogy reserves the right to change the contents of this manual without notice.

RENOGY.COM

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals