RENOGY RSHMSZ03P-US Motion Sensor User Manual
- June 4, 2024
- Renogy
Table of Contents
- Operation Instruction
- Specifications
- Product Introduction
- Features
- Connect multiple devices concurrently to Renogy ONE
- Delete Sensor from Renogy ONE
- Installation Methods
- FCC Warning
- Disclaimer
- Renogy Empowered
- Live Sustainably with Renogy
- Renogy Power PLUS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RSHMSZ03P-US Motion Sensor
User Manual
Motion Sensor works intelligently with Renogy ONE to communicate with other devices.
The other devices should support Zigbee 3.0 protocol. Detailed information is in accordance with the final product.
Operation Instruction
Download the DC Home app.
https://activity.renogy- dchome.com/#/?id=74&type=3¶m=MotionSensor
Pull out the battery insulation sheet from the Motion Sensor.
Add Motion Sensor to Renogy ONE.
Prior to adding a Motion Sensor to Renogy ONE, make sure that Renogy ONE has been bound to the DC Home app. For details, see the User Manual of Renogy ONE.
On the DC Home app, choose “Renogy ONE”, and tap “+ > Add Device” in the upper right corner of the interface. Long press the reset button on Motion Sensor for 5s until the LED indicator flashes red three times. This means the Motion Sensor has entered the pairing mode. Wait until the pairing completes.
If adding a Motion Sensor to Renogy ONE fails, move the sensor closer to Renogy ONE and redo the addition.
Specifications
Model | SNZB-03 |
---|---|
Battery model | CR2450 (3V) |
Wireless connection | Zigbee (IEEE 802.15.4) |
Working temperature | -10°C-40°C (14°F-104°F) |
Working humidity | 10-90%RH (non-condensing) |
Material | PC |
Dimensions | 40 x 35 x 28 mm |
(1.57 x 1.38 x 1.10 in)
Product Introduction
Features
SNZB-03 is a Zigbee low-energy motion sensor that can detect the movement of
objects in real-time.
By connecting it with Renogy ONE, you can create a smart scene to control
other devices.
Connect multiple devices concurrently to Renogy ONE
Power on Renogy ONE and set the sensor to pairing mode.
Choose Renogy ONE on the DC Home app, and tap “+ > Add Device”. Tap the sensor
name to add it to Renogy ONE.
Delete Sensor from Renogy ONE
To disconnect the sensor from Renogy ONE, long press the reset button on the sensor for 5s until the LED indicator flashes three times successfully.
Alternatively, you can long-press the sensor on DC
Home app to delete it from Renogy ONE.
Installation Methods
-
Place the Motion Sensor on a table for use.
-
Tear off the protective film of the 3M adhesive, and stick the sensor to the target installation position.
Do not install a Motion Sensor on a metal surface because it affects the wireless communication distance.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could avoid the user ’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interface;
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance20 of cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Disclaimer
- Renogy makes no warranty as to the accuracy, sufficiency, or suitability of the information in the User Manual because continuous product improvements are going to be made.
- Renogy assumes no responsibility or liability for losses or damages, whether direct, indirect, consequential, or incidental, which might arise out of the use of information in the User Manual.
- Renogy is not responsible or liable for the failures, damages, or injuries resulting from repair attempted by unqualified personnel or improper installation and operation.
- The illustrations in the User Manual are for demonstration purposes only. Details may appear slightly different depending on product revision and market region.
- Renogy reserves the right to change the information in the User Manual without notice.
- All trademarks are the property of their respective owners.
Manufacturer
Shenzhen Sonoff Technologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, Shenzhen, GD, China
ZIP code: 518000
MADE IN CHINA
Renogy Empowered
Renogy aims to empower people around the world through education and
distribution of DIY-friendly renewable energy solutions.
We intend to be a driving force for sustainable living and energy
independence.
In support of this effort, our range of solar products makes it possible for
you to minimize your carbon footprint by reducing the need for grid power.
Live Sustainably with Renogy
Did you know? In a given month, a 1KW solar energy system will…
Save 170 pounds of coal from being burned
Save 300 pounds of CO2 from being released into the atmosphere
Save 105 gallons of water from being consumed
Renogy Power PLUS
Renogy Power Plus allows you to stay in the loop with upcoming solar energy innovations, share your experiences with your solar energy journey, and connect with like-minded people who are changing the world in the Renogy Power Plus community.
Also, follow us on Social Media @RenogySolar.
Visit renogy.com to find relevant documentation or get
more support via “Contact Us“.
Renogy reserves the right to change the contents of this manual without
notice.
Join the Renogy Power Plus Community by downloading the DC Home App.
Find your e-warranty here, and more.
https://www.renogy-dchome.com/activity/#/?id=23&type=3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>