ELMAG POWER ROD 380-T Cell MMA Welding Inverter Owner’s Manual

June 1, 2024
ELMAG

ELMAG POWER ROD 380-T Cell MMA Welding Inverter

Specifications:

  • Welding Electrodes Diameter: 1.6 – 6.0 mm
  • Welding Current Setting: 10 – 380 A
  • Open Circuit Voltage: 83 V
  • Voltage / Phases: 400 / 3 V / ~
  • Mains Frequency: 50 Hz
  • Power Tolerance
  • Anti-Surge Fuse: 16 AT
  • Thermal Overload Protection: Yes
  • Degree of Protection (IP): 23 S
  • Input Power l1 max. / l1 eff.: 24 / 13 A
  • Ground Connection Plug / Cross-Section: 13 / 50 Ω / mm²
  • Connector: CEE 16 A
  • Width: 297 mm
  • Depth: 463 mm
  • Height: 588 mm
  • Weight: 26 kg

Product Description:

The CEBORA MMA Welding Inverter ‘PFC’ is a three-phase power source that enables professional welding of coated electrodes using the HOT START and ARC FORCE functions. It is suitable for intensive heavy-duty use in trade and industry, offering up to 380 amp welding power.

Application Examples:

  • Production, repair & assembly companies
  • Pipeline construction
  • Outdoor/offshore welding
  • Steel construction
  • Machine, plant & tank construction
  • Building & civil engineering

Materials:

  • Steel
  • CrNi
  • Cast materials

Electrodes:

The welding inverter is compatible with electrodes of diameter ranging from 1.6mm to 6.0mm.

Product Usage Instructions

  1. Ensure the power source is connected to a suitable power outlet with the correct voltage and phase.
  2. Select the appropriate welding electrode based on the material being welded.
  3. Adjust the welding current setting within the range of 10 to 380 A according to the welding requirements.
  4. If needed, utilize the HOT START and ARC FORCE functions for optimal welding performance.
  5. Follow safety precautions and wear appropriate protective gear during welding operations.

Frequently Asked Questions (FAQ):

  • Q: How do I register for a warranty?
    A: To apply for up to 24 months of warranty, register your product within 15 days of purchase at https://welding.cebora.it/de/assistance/register-your- product.

  • Q: What is the maximum welding current setting?
    A: The maximum welding current setting for this welding inverter is 380 A.

CEBORA MMA WELDING INVERTER ‘PFC’

TECHNICAL FACTS

  • HOT START+: Adjustable ignition current increase
  • ARC FORCE+: Optimisation of the arc dynamics
  • ANTI STICK: Welding current reduction in the event of a short circuit
  • Operating mode button MMA/TIG / TIG PULSE
  • LIFT TIG: optimal TIG ignition type with low ignition current
  • Generator-compatible
  • Powerful cooling fan
  • REMOTE CONT: Welding current remote control connection (optional extras)

PRODUCT HIGHLIGHTS

Product Description
The three-phase power sources SOUND MMA & POWER ROD enable professional welding of coated electrodes using the HOT START and ARC FORCE functions. Two absolute POWER models with up to 380 amp welding power, for intensive HEAVY- DUTY use in trade and industry.

Application examples –

  • Production, repair & assembly companies
  • Pipeline construction
  • Outdoor/offshore welding
  • Steel construction
  • Machine, plant & tank construction
  • Building & civil engineering

Materials

  • Steel
  • CrNi
  • Cast materials

Electrodes-

  • Ø 1.6 – 4.0 or 1.6 – 6.0 mm
  • Rutile (R), Rutile basic (RB), Basic (B), Rutile cellulose (RC), Cell: Cellulose (C)

SPECIFICATIONS

welding electrodes diameter 1.6 – 6.0 mm
welding current setting 10 – 380 A
100 % welding power source (10 min at 40 °C) at welding current

230 A

welding power source (10 min. at 40 °C) at welding current| 270 A
welding power source (10 min at 40 °C) at welding current| 30 / 380 % / A
Open circuit voltage| 83 V
voltage / phases| 400 / 3 V / ~
Mains frequency| 50 Hz
power tolerance| ± 10 %
anti-surge fuse| 16 AT
thermal overload protection| Yes
Degree of protection (IP)| 23 S
input power l1 max. / l1 eff.| 24 / 13 A
ground connection plug / cross-section| 13 / 50 O / mm2
connector| CEE 16 A
Width| 297 mm
Depth| 463 mm
---|---
Height| 588 mm
Weight| 26 kg

Start-up Service

Including ELMAG”‘-Quality Check

  • Depreservation, degreasing and de-securing
  • Assembly until ready for use
  • Oil filling of gearboxes, oil baths and central lubrication systems
  • Testing of electrics, safety components and devices
  • Test run on all shift and power levels
  • 30-minute test run at the highest power level
  • Checking and, if necessary, adjusting machine tolerances,
  • e.g. V-belt tension and spindle concentricity
  • Testing of all machine functions

For lathes, in addition:

  • Lathe chuck reassembly with the marking of minimum tolerance
  • Measurement of the spindle nose to tolerance < 0.01 mm
  • Measurement of the lathe chuck
  • Setting the tailstock parallelism

For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)

  • Assembly of the unit, chassis assembly
  • Intermediate hose assembly
  • Mains plug assembly and gas hose assembly
  • Connection preparation for gas or compressed air
  • Control cable plug Assembly on hose assembly
  • Installation & activation of water cooling unit for modular systems
  • Filling with cooling liquid for liquid-cooled units
  • Short test run or test welding

Competent execution guaranteed

ELMAG-POWER-ROD-380-T-Cell-MMA-Welding-Inverter-FIG-
\(3\)

Documents / Resources

| ELMAG POWER ROD 380-T Cell MMA Welding Inverter [pdf] Owner's Manual
POWER ROD 380-T Cell MMA Welding Inverter, POWER ROD 380-T Cell, MMA Welding Inverter, Welding Inverter, Inverter
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals