THRUSTMASTER GT Edition User Manual
- June 7, 2024
- THRUSTMASTER
Table of Contents
- WARNING:
- TECHNICAL FEATURES
- PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET: PLEASE READ BEFORE
- INSTALLING THE WHEEL ON ITS BASE
- ATTACHING THE RACING WHEEL
- PLAYSTATION®3 AND PLAYSTATION®4 MAPPING
- SETTING UP THE RACING WHEEL FOR PLAYSTATION®3 OR PLAYSTATION®4
- MODE BUTTON AND INDICATOR LIGHT (6)
- T3PA – GT EDITION PEDAL SET
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
THRUSTMASTER GT Edition User Manual
WARNING:
To ensure that your T300 racing wheel functions correctly with games,
you may be required to install the game’s automatic updates (available when
your system is connected to the Internet).
TECHNICAL FEATURES
-
T300 RS base
-
T300 GT wheel
-
2 sequential paddle shifters (up & down)
-
Directional buttons
-
Built-in USB sliding switch for PS4™/PS3™
-
MODE button + red/green indicator light
-
SELECT/START buttons on PS3™ and SHARE/OPTIONS on PS4™
-
PS button
-
Large threaded hole (for attachment system and fastening screw)
-
Attachment system
-
Metal fastening screw
-
Thrustmaster Quick Release
-
L3/R3 buttons
-
Power supply connector (type A or B)
(varies from one country to another) -
Racing wheel USB cable and connector
-
Gearbox connector
(gearbox sold separately) -
Pedal set connector
PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET: PLEASE READ BEFORE
PROCEEDING!
Your racing wheel’s power supply varies according to the country where you purchased your device. The power supply can be:
Internal, with:
-
a power supply unit located directly inside the racing wheel’s base, with a type A
connector. -
a 220-240 V power supply cable.
= compatible only with 220-240 V electrical power.
Never connect the 220-240 V cable to a 100-130 V electrical outlet!!!
Never connect this cable to a power adapter!!!
Internal, with:
- a power supply unit located directly inside the racing wheel’s base, with a type A connector.
- a 100-125 V power supply cable.
= compatible only with 100-125 V electrical power.
Never connect the 100-125 V cable to a 220-240 V electrical outlet!!!
Never connect this cable to a power adapter!!!
IMPORTANT : if you do not know which voltage is supplied in the area in which you are using your racing wheel, please ask your local electricity supplier.
External, with:
- an external power supply unit, with a type B connector.
- a power supply cable.
= compatible with all electrical voltages, from 110-240 V
WARNING
Before using this product, please read this manual carefully and save it for
later reference.
Warning – Electrical shock
-
Keep the product in a dry location and do not expose it to dust or sunlight.
-
Do not twist or pull on the connectors and cables.
-
Do not spill any liquid on the product or its connectors.
-
Do not short-circuit the product.
-
Never dismantle the product; do not throw it onto a fire and do not expose it to high temperatures.* Do not use a power supply cable other than the one provided with your racing wheel.
-
Do not use the power supply cable if the cable or its connectors are damaged, split or broken.
-
Make sure that the power supply cable is properly plugged into an electrical outlet, and properly
connected to the connector at the rear of the racing wheel’s base. -
Do not open up the racing wheel: there are no user-serviceable parts inside. Any repairs must be carried out by the manufacturer, its authorised representative or a qualified technician.
-
Only use attachment systems/accessories specified by the manufacturer.
-
If the racing wheel is operating abnormally (if it is emitting any abnormal sounds, heat or odours), stop using it immediately, unplug the power supply cable from the electrical outlet and disconnect the other cables.
- If you will not be using the racing wheel for an extended period of time, unplug its power supply cable from the electrical outlet.
- The power outlet shall be installed near the equipment and shall be easily accessible.
Air vents
Make sure not to block any of the air vents on the racing wheel’s base.
For optimal ventilation, make sure to do the following:
- Position the wheel’s base at least 10cm away from any wall surfaces.
- Do not place the base in any tight spaces.
- Do not cover the base.
- Do not let any dust build up on the air vents.
For safety reasons, never use the pedal set with bare feet or while
wearing only socks on your feet.
THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY
RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES.
Warning – Injuries due to force feedback and repeated movements
Playing with a force feedback racing wheel may cause muscle or joint pain. To
avoid any problems:
- Avoid lengthy gaming periods.
- Take 10 to 15 minute breaks after each hour of play.
- If you feel any fatigue or pain in your hands, wrists, arms, feet or legs, stop playing and rest for a few hours before you start playing again.
Warning – Injuries due to force feedback and repeated movements (continued)
-
If the symptoms or pain indicated persist when you start playing again, stop playing and consult your
doctor. -
Keep out of children’s reach.
-
During gameplay, always leave both hands correctly positioned on the wheel without completely letting go.
-
During gameplay, never place your hands or your fingers under the pedals or anywhere near the pedal set.
-
During calibration and gameplay, never place your hand or your arm through the openings in the racing wheel.
-
Make sure that the racing wheel’s base is properly secured, as per this manual’s instructions.
Product to be handled only by users 16 years of age or older
Be careful not to drop the product on yourself or on anyone else!
Warning – Pedal set pinch hazard when playing
- Keep the pedal set out of children’s reach.
- During gameplay, never place your fingers on or anywhere near the sides of the pedals.
- During gameplay, never place your fingers on or anywhere near the pedal’s rear base.
- During gameplay, never place your fingers on or anywhere near the pedal’s front base.
Warning – Pedal set pinch hazard when not playing
- Store the pedal set in a safe place, and keep it out of children’s reach.
UPDATING YOUR RACING WHEEL’S FIRMWARE
The firmware included in your racing wheel’s base can be updated to a more
recent version featuring product enhancements.
To display the firmware version that your racing wheel is currently using and
update it if required: on PC, visit http://support.thrustmaster.com. Click
Racing Wheels / T300 RS, then select Firmware and follow the instructions
describing the download and installation procedure.
Important note:
On PC, the USB sliding switch (5) on the racing wheel’s base must always be
set to the PS3™ position
INSTALLING THE WHEEL ON ITS BASE
Align the connector positions using the arrows:
Base (1) connector: Arrow pointing upwards
Racing wheel (2) connector: Arrow pointing upwards
Once the connectors are correctly positioned, simply rotate the Thrustmaster
Quick Release (12) device’s ring anticlockwise, while holding the racing wheel
(2) in position.
Then, tighten the ring as much as you can: to do so, hold the ring in position
and rotate the racing wheel clockwise.
Once you have installed the wheel, rotate it 180° (when facing the wheel, the GT logo should be upside down) to access the small attachment screw located on the ring of the Thrustmaster Quick Release (12) device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use excessive force), turning it clockwise
When using a Philips screwdriver, ensure NOT to use excessive force when
tightening the small attachment screw!
Stop turning the screw as soon as you feel some resistance.
ATTACHING THE RACING WHEEL
Attaching the racing wheel to a table or a desktop
- Place the racing wheel on a table or any other horizontal, flat and stable surface.
- Insert the fastening screw (11) in the attachment system (10), then tighten the device by turning the screw anticlockwise, so that it feeds into the large threaded hole (9) located beneath the racing wheel, until the wheel is perfectly stable
WARNING : Never tighten the screw alone, without the attachment system in place! (This could damage the racing wheel.)
Attachment / Removal
|
Direction
---|---
To tight:
Turn the screw anticlockwise
|
To release:
Turn the screw clockwise
|
Attaching the racing wheel’s base to a cockpit
-
Place the racing wheel’s base on the cockpit shelf.
-
Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small screw threads located on the underside of the racing wheel.
Important : The length of the two M6 screws must not exceed the thickness of the shelf + 12 mm;
longer screws could cause damage to internal components located in the racing wheel’s base. -
If required, tighten the standard attachment system by inserting the fastening screw in the large threaded hole
PLAYSTATION®3 AND PLAYSTATION®4 MAPPING
SETTING UP THE RACING WHEEL FOR PLAYSTATION®3 OR PLAYSTATION®4
-
Connect the pedal set to the connector (17) located at the back of the racing wheel’s base.
-
Connect the power supply cable to the connector (14) located at the back of the racing wheel’s base.
-
Plug the power supply cable into an electrical outlet with the same voltage specifications
For more information about this, please refer to the PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET section, on page 3 in this manual. -
Set the USB sliding switch (5) on the racing wheel’s base to either the PS3™ or PS4™ position, depending on the system or the game you are using.
-
Connect the racing wheel’s USB connector (15) to one of the system’s USB ports.
-
Once your system is powered on, your racing wheel will calibrate itself automatically.
-
On PlayStation®4 (when the USB sliding switch is set to the PS4™ position): press the racing wheel’s PS button (8) and sign in to your Sony Entertainment Network account, in order to be able
to use the wheel.
You are now ready to play!
Important notes:
-
The USB sliding switch (5) on the racing wheel’s base must always be set to the proper position (PS3™ or PS4™) before connecting the wheel’s USB cable to the system. To change the sliding switch’s position, disconnect the USB cable from the system and then change the position of the switch before reconnecting the USB cable to the system.
– On PlayStation®3, the USB sliding switch (5) must always be set to the PS3™ position: -
The wheel is recognised in most games as a T500RS wheel.
-
The wheel is functional in compatible games and in system menus.
-
The “PS” function is functional on the wheel.
-
On PlayStation®4, with the USB sliding switch (5) in the PS3™ position:
-
The wheel is recognised in most games as a T500RS wheel.
-
The wheel is functional in compatible games, but not in system menus.
-
The “SHARE” and “PS” functions are not functional on the wheel.
-
On PlayStation®4, with the USB sliding switch (5) in the PS4™ position:
-
Don’t forget to press the racing wheel’s PS button (8) in order to be able to use the wheel.
-
The wheel is recognised in most games as a T300 RS wheel.
-
The wheel is functional in compatible games and in system menus.
-
The “SHARE” and “PS” functions are functional on the wheel.
-
The list of PlayStation®3 and PlayStation®4 games compatible with the T300 RS (along with the required position for the USB sliding switch (5) according to the game being played) is available at:
http://support.thurstmaster.com
(Click Racing Wheels / T300 RS / Games setting)
This list is updating regularly.
**SETTING UP THE RACING WHEEL FOR PC***
- PC compatibility not tested nor endorsed by Sony Interactive Entertainment Europe.
For more information, visit http://support.thrustmaster.com.
AUTOMATIC RACING WHEEL AND PEDAL SET CALIBRATION
The wheel automatically self-calibrates when you plug the racing wheel into an
electrical outlet and connect the racing wheel’s USB connector to the system.
During this phase, the racing wheel will rotate quickly towards the left and
the right, covering a 1080 degree angle, before stopping at the centre.
WARNING :
Never touch the racing wheel during the self-calibration phase!
(This could result in improper calibration and/or personal injuries.)
AUTOMATIC CALIBRATION OF THE PEDAL SET
Never connect the pedal set to the racing wheel’s base (or disconnect it from
the base) when it is connected to the system or during gameplay (this could
result in improper calibration).
Always connect the pedal set before connecting the racing wheel to the system.
Once the racing wheel’s calibration is complete and the game has been started,
the pedals are automatically calibrated after a few presses.
WARNING:
Never press the pedals during the racing wheel’s self-calibration phase
or while a game is loading!
(This could result in improper calibration.)
If your racing wheel and/or pedal set do not function correctly, or if they
seem to be improperly calibrated:
Power off your system and completely disconnect the racing wheel. Then
reconnect all cables (including the power supply cable and the pedal set), and
restart your system and your game.
INTERNAL TEMPERATURE SENSOR
The wheel’s cooling system is composed of a heat sink and a fan.
-
A thermostat monitors the wheel’s internal temperature.
-
When you are using the wheel in a game:
-
The cooling fan starts up when the wheel has reached a certain temperature (after a few minutes
of gameplay, depending on the strength of the Force Feedback effects used). -
The power of the Force Feedback effects automatically decreases as soon as the wheel reaches
a much higher temperature level (to protect the motor). The power of these effects automatically
increases as soon as the temperature slightly decreases.
-
-
When you’re done playing: due to the motor’s thermal inertia, the cooling fan continues to operate until the temperature drops below the fan’s startup level. Your wheel has been designed in this way in order to facilitate cooling, and to protect the motor (this may take from 5 to 45 minutes, depending on the temperature reached while using the wheel in a game).
MODE BUTTON AND INDICATOR LIGHT (6)
MODE button for the pedal set
You can electronically swap the accelerator and clutch pedals.
To do so, simply press the MODE button (6) for 2 seconds.
The racing wheel’s internal memory stores whether the pedals have been swapped
around or not.
Gas and Clutch Pedal
| Colour of the MODE indicator light (6)
---|---
Normal|
Red
Swapped around
|
Green
Other information regarding the MODE button
To learn more about the MODE button and indicator light, please visit
http://support.thrustmaster.com. Click Racing Wheels / T300 RS , and
then select Manual or FAQ.
HELP FILES AND FAQS (NOT INCLUDED IN THIS MANUAL)
Please visit http://support.thrustmaster.com. Click Racing Wheels /
T300 RS, and then select
Manual or FAQ
T3PA – GT EDITION PEDAL SET
TECHNICAL FEATURES
-
Metal support for conical stop (not installed by default)
-
Conical stop
-
Attachment screw for metal support
-
2.5 mm Allen key (included)
-
Position adjustment nut for conical stop
-
Pedal arm
-
Plastic head support
-
Metal pedal head
WARNING
Before using this product, be sure to read these instructions carefully and
save them for future reference.
For safety reasons, never use the pedal set with bare feet or while
wearing only socks on your feet.
THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY
RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES.
- Keep the pedal set out of the reach of children.
- During gaming sessions, never place your fingers or thumbs on or near the sides of the pedals.
- During gaming sessions, never place your fingers or thumbs on or near the rear base of the pedals.
- During gaming sessions, never place your fingers or thumbs on or near the front base of the pedals.
AUTOMATIC CALIBRATION OF PEDALS
IMPORTANT :
- Never connect or disconnect the pedal set from the base of the wheel when the wheel is connected to the PS3™ or PS4™ system, or during gaming sessions, to avoid calibration problems.
- Always connect the pedal set to the wheel before connecting the wheel to the PS3™ or PS4™ system.
- Once the wheel has self-calibrated and the game has started, the pedals automatically calibrate themselves after being pressed a few times.
- Never press on the pedals when the wheel is self-calibrating or when your game is starting up, to avoid calibration problems.
- If the pedals are not functioning correctly or appear to be improperly calibrated, power off your system, completely disconnect your wheel, then reconnect all of the cables (including the power supply cable and the pedal set cable), power the system back on and restart your game.
ATTACHING THE PEDAL SET TO A COCKPIT
- Attach the pedal set using the small screw threads located on the underside of the pedal set.
- Screw two M6 screws (not included) into the cockpit’s pedal support plate and into the two small screw threads located on the underside of the pedal set.
Important : The length of the two M6 screws must not exceed the thickness of the cockpit’s pedal support plate plus an additional 10 mm, to avoid damaging the pedal set’s internal components.
ADJUSTING THE PEDAL SET
Each of the three pedals includes:
- A metal head (8) with multiple perforations (nine for the accelerator – two for the brake – six for the clutch).
- A plastic head support (7) (placed between the head and the arm) with four perforations.
- A pedal arm (6) with two perforations.
ATTENTION : To avoid any calibration problems, be sure to always disconnect your wheel’s USB cable from the PS3™ or PS4™ system before making any adjustments to your pedal set.
Adjusting the HEIGHT of the accelerator pedal
- Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head (8) and its support (7) in place.
- Select your preferred height position, then replace and re-tighten the screws so that the metal head (8) and its support (7) are held firmly in place.
Adjusting the SPACING
- Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head (8) and its support (7) in place.
- Select your preferred position (to the left, centered, or to the right), then replace and re-tighten the screws so that the metal head (8) and its support (7) are held firmly in place
Examples illustrating the clutch pedal:
Number of possible spacing positions per pedal:
Three for accelerator pedal
– Three for clutch pedal
Adjusting the INCLINATION of the pedals
- Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head (8) and its support (7) in place.
- Turn the plastic head support (7) 180°, then replace and re-tighten the screws so that the metal head (8) and its support (7) are held firmly in place.
Examples illustrating the accelerator pedal:
Number of possible inclination positions per pedal:
- Two for accelerator pedal
- Two for brake pedal
- Two for clutch pedal
Installing the conical stop (“CONICAL RUBBER BRAKE” mod)
This modification (or “mod”) is not essential, and is not installed by
default. This means that the brake pedal functions perfectly even if the mod
is not installed.
This mod lets you experience a different feeling and resistance when braking.
It’s up to you whether or not to install it, depending on your own
preferences.
- Screw the conical stop (2) onto its metal support (1).
- Screw the position adjustment nut (5) onto the bottom (onto the conical stop’s screw thread).
- Position the unit at the back of the brake pedal’s arm.
- Using the included 2.5 mm Allen key (4), attach the unit using the attachment screw (3) and the small central screw thread located on the underside of the pedal set
The “CONICAL RUBBER BRAKE” mod is now installed!
Adjusting the brake pedal’s RANGE of travel and STRENGTH of resistance
By slightly unscrewing the nut (5), you can further strengthen the resistance of the brake pedal by moving the conical stop (2) closer to the back of the pedal’s arm (if necessary, use a 14 mm wrench or pliers to re-tighten the nut and maintain the selected position). The closer the conical stop is positioned to the back of the pedal’s arm, the greater the strength of resistance will be.
Note : When the conical stop is very close to the back of the brake pedal’s arm, you may experience difficulties in reaching the maximum calibration value. Should that be the case:
- Slowly, press very hard on the brake pedal so as to reach the maximum value (if necessary, stand very briefly on the pedal – just for a second), then release the pressure; or else
- Move the conical stop a bit farther away from the back of the brake pedal’s arm
CONSUMER WARRANTY INFORMATION
Worldwide, Guillemot Corporation S.A., whose registered office is located at
Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter
“Guillemot”) warrants to the consumer that this Thrustmaster product shall be
free from defects in materials and workmanship, for a warranty period
which corresponds to the time limit to bring an action for conformity with
respect to this product. In the countries of the European Union, this
corresponds to a period of two (2) years from delivery of the Thrustmaster
product. In other countries, the warranty period corresponds to the time limit
to bring an action for conformity with respect to the Thrustmaster product
according to applicable laws of the country in which the consumer was
domiciled on the date of purchase of the Thrustmaster product (if no such
action exists in the corresponding country, then the warranty period shall be
one (1) year from the original date of purchase of the Thrustmaster product).
Should the product appear to be defective during the warranty period,
immediately contact Technical Support, who will indicate the procedure to
follow. If the defect is confirmed, the product must be returned to its place
of purchase (or any other location indicated by Technical Support). Within the
context of this warranty, the consumer’s defective product shall, at Technical
Support’s option, be either replaced or returned to working order. If, during
the warranty period, the Thrustmaster product is subject to such
reconditioning, any period of at least seven (7) days during which the product
is out of use shall be added to the remaining warranty period (this period
runs
from the date of the consumer’s request for intervention or from the date on
which the product in question is made available for reconditioning, if the
date on which the product is made available for reconditioning is subsequent
to the date of the request for intervention). If permitted under applicable
law, the full liability of Guillemot and its subsidiaries (including for
consequential
damages) is limited to the return to working order or the replacement of the
Thrustmaster product. If permitted under applicable law, Guillemot disclaims
all warranties of merchantability or fitness for a particular purpose.
This warranty shall not apply: (1) if the product has been modified, opened,
altered, or has suffered damage as a result of inappropriate or abusive use,
negligence, an accident, normal wear, or any other cause unrelated to a
material or manufacturing defect (including, but not limited to, combining
the Thrustmaster product with any unsuitable element, including in particular
power supplies, rechargeable batteries, chargers, or any other elements not
supplied by Guillemot for this product); (2) if the product has been used for
any use other than home use, including for professional or commercial purposes
(game rooms, training, competitions, for example); (3) in the event of failure
to comply with the instructions provided by Technical Support; (4) to
software, said software being subject to a specific warranty; (5) to
consumables (elements to be replaced over the product’s lifespan: disposable
batteries, audio headset or headphone ear pads, for example); (6) to
accessories (cables, cases, pouches, bags, wrist-straps, for example); (7) if
the product was sold at public auction.
This warranty is nontransferable.
The consumer’s legal rights with respect to laws applicable to the sale of
consumer goods in his or her country are not affected by this warranty.
Additional warranty provisions
During the warranty period, Guillemot shall not provide, in principle, any
spare parts, as Technical Support is the only party authorized to open and/or
recondition any Thrustmaster product (with the exception of any reconditioning
procedures which Technical Support may request that the
consumer carry out, by way of written instructions – for example, due to the
simplicity and the lack of confidentiality of the reconditioning process – and
by providing the consumer with the required spare part(s), where applicable).
Given its innovation cycles and in order to protect its know-how and trade
secrets, Guillemot shall not provide, in principle, any reconditioning
notification or spare parts for any Thrustmaster product whose warranty period
has expired.
Liability
If permitted under applicable law, Guillemot Corporation S.A. (hereinafter
“Guillemot”) and its subsidiaries disclaim all liability for any damages
caused by one or more of the following: (1) the product has been modified,
opened or altered; (2) failure to comply with assembly instructions; (3)
inappropriate or abusive use, negligence, an accident (an impact, for
example); (4) normal wear; (5) the use of the product for any use other than
home use, including for professional or commercial purposes (game rooms,
training, competitions, for example). If permitted under applicable law,
Guillemot and its subsidiaries disclaim all liability for any damages
unrelated to a material or manufacturing defect with respect to the product
(including, but not limited to, any damages caused directly or indirectly by
any software, or by combining the Thrustmaster product with any unsuitable
element, including in particular power supplies, rechargeable batteries,
chargers, or any other elements not supplied by Guillemot for this product).
THRUSTMASTER
TECHNICAL SUPPORT
http://support.thrustmaster.com
Licensed for sale in Europe, Africa, Middle East, Russia, India and Oceania.
For use exclusively with PlayStation®3 and PlayStation®4.
All other trademarks and brand names are hereby acknowledged and are property
of their respective owners. Illustrations not binding. Contents, designs and
specifications are subject to change without notice and may vary from one
country to another. Made in China.
Manufactured and distributed by Guillemot Corporation S.A.
ENVIRONMENTAL PROTECTION RECOMMENDATION
In the European Union: At the end
of its working life, this product should not be disposed of with standard
household waste, but rather dropped off at a collection point for the disposal
of Waste Electrical and Electronic Equipment (WEEE) for recycling. This is
confirmed by the symbol found on the product, user manual or packaging.
Depending on their characteristics, the materials may be recycled. Through
recycling and other forms of processing Waste Electrical and Electronic
Equipment, you can make a significant contribution towards helping to protect
the environment. Please contact your local authorities for information on the
collection point nearest you.
For all other countries: Please adhere to local recycling laws for electrical
and electronic equipment.
Retain this information. Colours and decorations may vary.
Plastic fasteners and adhesives should be removed from the product before it
is used.
www.thrustmaster.com
- Applicable to EU and Turkey only
References
- rustmaster.com
- StMaster.com is for sale | HugeDomains
- Thrustmaster - Technical support website
- Thrustmaster - Technical support website
- Thrustmaster | Wheels, Joysticks and Gamepads for video games
- T300RS - | Thrustmaster
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>