better bathrooms ARIMW005 Matt Slotted Basin Waste User Manual

: June 2, 2024
: Better Bathrooms

Table of Contents

better bathrooms ARIMW005 Matt Slotted Basin Waste
Product Information
Product Usage Instructions
Parts / Diagrams
Dimensions
Installation
Troubleshooting
Maintenance and Cleaning
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

better bathrooms ARIMW005 Matt Slotted Basin Waste

Product Information

Specifications

Model: ARIMB018 – Matt Black Slotted Sprung Basin Waste
Material: Plastic, Rubber, Metal
Color: Matt Black
Installation Type: Slotted

Product Usage Instructions

Single-person Assembly

We recommend using professional tradespeople for installation.

Installation

Tools required: Seal tape, Spanner

Unscrew the locknut and remove the plastic gasket and rubber washer.
Insert the drain body from above the basin, ensuring proper alignment.
For slotted basin waste, align the slot with the overflow on the basin.
Install the rubber washer, plastic gasket, and tighten with the locknut.
To operate, press down the clicker dome to release water.
Check all joints for leaks.

Maintenance and Cleaning

To maintain the surface, wipe with a clean damp cloth and dry.
Avoid abrasive cleaners. Rinse immediately if harsh chemicals contact the surface.

FAQ

Q: Can I use silicone sealant during installation?
A: Yes, silicone sealant can be used during installation.

Q: What should I do if I encounter leaks?
A: Check that all joints are properly tightened and inspect for any damage or dirt on the o-ring or rubber washers.

Thank you for choosing Better Bathrooms.
Please read this manual before installing your product and keep for future reference.

Product

ARIMB018 – Matt Black Slotted Sprung Basin Waste
ARIBB020 – Brushed Brass Slotted Basin Waste
CHSBW001 – Chrome Slotted Basin Waste
ARIMW005 – Matt White Slotted Basin Waste
ARIVRG005 – Vapour Rose Gold Slotted Basin Waste
ARIMB019 – Matt Black Unslotted Sprung Basin Waste
ARIBB021 – Brushed Brass Unslotted Basin Waste
CHUBW001 – Chrome Unslotted Basin Waste
ARIMW006 – Matt White Unslotted Basin Waste
ARIVRG006 – Vapour Rose Gold Unslotted Basin Waste

Single-person assembly
We always recommend using professional tradespeople to install your product

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,you can fall in love with your space every single day.
As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
contact us via betterbathrooms.com/content/contact-us

Important information

Please read these instructions thoroughly and retain for future reference
Installation must be carried out in compliance with The Water Fittings Regulations and Scottish Water Byelaws.
The system must be flushed prior to installation, else it might clog the filter and the following phenomenon occurs: discharged water volume is small, or temperature cannot be controlled well.
Pressures must be equal for optimum performance
Please do not connect hot and cold water supply lines in reverse. This could result in hot water flowing from cold line and cause scalding.
The feed-water temperature of water shall not exceed 85°C.
Exceeding 85°may cause scalding, the service life of faucets might be shortened,or the faucet might be damaged.
After installation, please make sure the faucet is securely mounted and checked for leaks.

Parts / Diagrams

| No| Part Description
---|---|---
1| Clicker dome
2| O-ring
3| Piston kit
4| Drain body
5| Rubber Washer
6| Rubber Washer
7| Plastic gasket
8| Locknut

Dimensions

better-bathrooms-ARIMW005-Matt-Slotted-Basin-Waste-2

Tools required

Seal tape
Spanner

Installation

Slotted/Unslotted Basin Waste

Note: Silicone sealant can be used.

Unscrew the locknut(4) , and remove the plastic gasketr(3) and rubber washer(2).
Insert the drain body(1) from above the basin.
For the slotted basin waste, make sure the slot lines up with the overlfow on the basin.
Install the rubber washer(2), plastic gasket(3) and tighten with locknut(4)).
To fill the basin, the Clicker mechanism requires pressing down the clicker dome, and pressing it again to release the water.
Check all the joints for leaks.

Troubleshooting

Issues	Check
Loose of drain body	• Is locknut(8) fully tighten

• Is the clicker dome(1) fully tighten

Water leak| • Is there damage or dirt with the o-ring(2)

• Is there damage or dirt with the rubber washers(5 or 6)

Maintenance and Cleaning

To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do not use any abrasive cleaning agents or materials.
If any harsh chemicals come into contact with the surface of the product, rinse and wipe clean immediately.

For more information