PNI PT03 SafeHome WiFi Smart Motion Detector User Manual
- June 4, 2024
- PNI
Table of Contents
PNI PT03 SafeHome WiFi Smart Motion Detector
Introduction
The PIR senzor PNI SafeHome PT03 can detect the human presence by the automatic temperature compensation method (it detects the infrared radiation emitted by the human body). When the intruder enters the detection range of the sensor, it will send a notification on the phone, through the Tuya Smart application.
Technical specifications
- Input voltage: Lithium battery CR123A 3VDC (included)
- Standby current: ≤45µA
- Alarm current: ≤160mA
- Voltage alarm limit: ≤2.6V
- WiFi: 802.11b/g/n
- WiFi frequency: 2.4GHz
- Transmission power: 100mW
- Detection distance: up to 10m
- Detection angle: 110°
- Operating temperature: -26°C ~ +80°C
Tuya Smart app
-
Search the Google Play or App Store for Tuya Smart app or scan the QR code below. Open the application after installation and register.
-
Android
-
iOS
-
-
Move the ON/OFF button on the back of the sensor to the ON position. The red LED will flash. If the red LED does not flash, open the sensor housing and hold down the Reset button for 5 seconds, until the red LED flashes, indicating that the sensor is in the pairing state. User manual PNI SafeHome PT03
-
In the main application interface, click Add device or + in the upper right corner.
-
From the list of devices, select Sensors → Sensor (Wi-Fi)
-
Select the WiFi network and enter the network password.
-
In the next interface, check the option Confirm the indicator is blinking rapidly.
-
Wait for the sensor to connect.
-
After your detector was identified, tap Done to finish.
-
In the list of devices added to Tuya, click on your detector for additional options.
Operating modes
Test mode
After turning on the detector, the LED flashes 3 times. For 5 minutes, the detector is in test mode. The alarm is triggered continuously. You will receive notifications in the application for each detected detection.
Normal operation mode
After the 5 minutes of testing, the detector enters normal operation mode. The motion detection alarm is triggered once every 5 minutes. In the next hour, if the number of detected movements is less than 6, the detector remains in normal working mode.
Energy saving mode
If in the next hour, the number of detected movements is more than 6 – User manual PNI SafeHome PT03
Safety Warnings
- Install the motion detector in the area where an intruder may enter.
- To avoid false alarms, do not install the motion detector near heat-emitting devices such as air conditioners, radiators, fans, ovens, or under direct sunlight.
- No objects should be placed in front of the sensor that could obstruct the detection field of the detector.
Simplified EU declaration of conformity
SC ONLINESHOP SRL declares that PNI SafeHome PT03 Smart Motion Detector is in
accordance with RED Directive 2014/53/EU. The full text of the EU Declaration
of Conformity is available at the following website:
https://www.mypni.eu/products/7224/download/certifications
8 – User manual PNI SafeHome PT03
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>