HYPERGEAR SOUND ADVANTAGE Pro Audio Condenser Microphone User Manual
- June 4, 2024
- HyperGear
Table of Contents
SOUND ADVANTAGE Pro Audio Condenser Microphone
User Manual
SPECIFICATIONS
- Noise Reduction Microphone
- Removable Pop Filter
- 180° Adjustable Head
- 360° Rotatable Base
- Protective Shock Mount
- Tripod Stand
- Anti-Skid Feet
- USB Connector
- 5.5ft/1.7m Cable Length
ASSEMBLY
- Insert the microphone into the shock mount.
- Adjust the position of the pop filter, and tighten the knob to secure it in place.
- Open the tripod base and adjust it to your desired positioning and height.
INSTALLATION
Plug the microphone Into your devices via the USB connector.
If There Is No Sound From the Microphone
In your application and operating system, check the volume and microphone
settings.
Need help? Visit www.myhypergear.com for
additional product information or email
info@myhypergear.com
IMPORTANT
Read all safety instructions and warnings prior to using this product. Improper use and failure to follow safety guidelines could result in damage, excess heat, toxic fumes, fire, explosion, electrical shock, or other hazards causing serious and/or fatal injury and/or property damage and not the manufacturer’s responsibility. The user is responsible for maintaining this product with care for maximum use.
- Do not store at extreme temperatures (below 40°F or above 90°F)
- Do not attempt to modify, disassemble, or repair this product.
- Avoid excessive drops, bumps, and abrasions. If the device has dents, punctures, tears, deformities, or corrosion, discontinue use and contact the manufacturer or dispose of it in an appropriate method.
- If you find this product rapidly increasing in temperature, emitting an odor, deformed, abraded, or demonstrating an abnormal phenomenon, discontinue use immediately.
- Disposal of the unit in the garbage is unlawful under state and federal environmental laws and regulations.
Contactinfo@myhypergear.com to submit a
warranty claim.
Proof of purchase is required.
www.myhypergear.com