HYPERGEAR 3-in-1 max magnetic wireless charge apple devices User Manual
- June 5, 2024
- HyperGear
Table of Contents
HYPERGEAR 3-in-1 max magnetic wireless charge apple devices
IMPORTANT
The charging dock is designed to be used with MagSafe compatible iPhones, cases or sleeves (sold separately).
Phone cases that contain metal, magnets, or are thicker than 3mm will
interfere with wireless charging.
NOTE: This charger is designed for Qi-compatible devices. If your phone
does not have built-in Qi wireless charging capabilities, please use a
certified Qi wireless charging case or receiver. Refer to your phone’s user
manual for detailed features and functions.
SPECIFICATIONS
Input
USB-C: 9/4A, 12V/2.5A (30W Max)
Output
MagSafe Compatible Charging Surface: 15W/10W/7.5W/5W
Charging Pad for Airpods: SV /lA (5W Max)
(When Connected) Watch Dock:
USB: SV /2A (lOW Max)
Specifications
- Massare Compatible Charging Surface
- Charging Pad for AirPods
- Apple Watch• Charger Dock
- LED Touch control
- Dimmable LED Base
- USB-C Input Port
- Apple Watch• use Port
- Cabla Routing/ Organizer
- 3tl/914mm USB-C Cabla
- 20W PD Wall Adapter
- USB-C To USB Adapter
- Mini Screwdriver
INSTRUCTIONS
- Insert the Apple Watch® Charger into the dock and feed the cable through the cable routing and the hole in the base.
- Place the bracket on the base and tighten the screws on the bottom of the base, using the included mini screwdriver.
- Plug the Apple Watch® charging cable into the USB port.
- NOTE: If you have a USB-C Apple Watch charging cable, use the included USB-C to USB adapter on your charging cable to plug into the USB port.
- Use the included USB-C cable and wall adapter to power the device.
Phone
Attach your phone to the magnetic charging stand. It will indicate when
charging begins.
Apple Watch
Place your watch on the designated charging area.
Airpod.-
Place the wireless charging case on the charging pad. It will indicate when
charging begins.
LED STATUS
The LED base’s light options are controlled by pressing the touch sensor.
It’s normal for a wireless charger and your device to become warm while
charging.
Need help? Visit www.myhypergear.com for
additional product information or contact info@myhypergear.com
IMPORTANT
Read all safety instructions and warnings prior to using this product. Improper use and failure to follow safety guidelines could result in hazards, injury and/or property damage that is not the manufacturer’s responsibility. The user is responsible for maintaining this product with care for maximum use.
- Use only a certified 20W or QC 3.0 adapter to power this device. Standard adapters may damage the charger or cause a fire hazard.
- Do not place metal objects, magnets, magnetic stripe cards, and hard drive based devices near the wireless charger. It may cause data corruption.
- Do not attempt to modify, disassemble, or repair this product.
- Do not expose to water, moisture, or extreme temperatures (below 40°F or above 90°F).
- Under any circumstances, if you find this product rapidly increasing in temperature, emitting odor, or demonstrating an abnormal phenomenon, discontinue use immediately.
Contact info@myhypergear.com to submit a warranty daim. Proof of purchase is required
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>