HYPERGEAR HGSW1 Activ8 Smart Watch Fitness Tracker User Manual
- June 1, 2024
- HyperGear
Table of Contents
HYPERGEAR HGSW1 Activ8 Smart Watch Fitness Tracker
OVERVIEW
Read all safety instructions and warnings prior to using this product. See the end of this manual for detailed information.
Specifications
| Compatibility | Android 5.0+ / iOS 9.0 + |
|---|---|
| Bluetooth Version | 5.2 |
| Connection Range | Up to 33 ft (10 meters) |
| Battery Capacity | 300mAh |
| Power Input | 5V= 1A |
| Charging Time | 2.5 hours |
Battery Life
Basic Use| 25 days
Typical Use| 5 to 7 days
Heavy Use| 2 to 3 days
Package Contents
- Smartwatch
- Magnetic Charging Cable
- 3X Silicone watch bands
Need help? Visit www.myhypergear.com for additional product information or contact [email protected]
CHANGE THE STRAP
Remove
Firmly pull the pin inward to release the wrist band from the watch.”
Attach
Insert the end of the pin into the watch.
Firmly pull and hold the pin inward. Slide the band into position then release
the pin.
GETTING STARTED
Get the App
Scan the QR code to download and install “Da Fit” from the App Store or
Google Play
Set Up & Pairing
- Ensure Bluetooth is enabled on your device
- Open the App
- Select “Activ8” from the list of devices
- Accept the Bluetooth pairing request
- Set up your profile
Charging
NOTE: Fully charge before first use (- 2.5 hours)
Always use the included magnetic charging cable and a compatible USB power
source.
CONTROLS
-
Crown
Press & Hold 3 sec Press 1X -
Multifunction (MFB) Button
Press 1X -
Microphone
-
Speaker
Touchscreen
SAFETY INSTRUCTIONS
Read all safety instructions and warnings prior to using this product. Improper use and failure to follow safety guidelines could result in damage, excess heat, toxic fumes, fire, explosion, electrical shock, or other hazards causing serious and/or fatal injury and/or property damage that is not the manufacturer’s responsibility. The user is responsible for maintaining this product with care for maximum use.
IMPORTANT
This device is for wellness purposes only and not intended for medical use.
Health app data is approximate and not intended to replace traditional methods
of diagnosis or for treatment of medical conditions.
Always consult a qualified healthcare professional.
- This watch is not fully waterproof. Do not submerge. Do not use in the shower or when swimming. Do not clean with harsh chemicals, soaps, or detergents.
- Recharge with the included charging cable and a SW power source only. More powerful chargers may damage/overheat the battery or cause a fire hazard.
- Do not store in a depleted state. Battery cells may be damaged. Charge at least once every 3 months even when not in use.
- Do not store at extreme temperatures (below 14°F or above 122°F). Battery cells may be damaged.
- Do not attempt to modify, disassemble, or repair this product.
- Avoid excessive drops, bumps, and abrasions.
- If the device has dents, punctures, tears, deformities, or corrosion, discontinue use and contact the manufacturer or dispose of in an appropriate method.
- If you find this product rapidly increasing in temperature, emitting odor, deformed, abraded, or demonstrating an abnormal phenomenon, discontinue use immediately.
- Do not use in the vicinity of flammable liquids or gases, propane tanks, large engines, high-voltage devices, or heat sources such as radiators and ovens.
- Disposal of the watch in the garbage is unlawful under state and federal environmental laws and regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Hyper Gear is under license.
Other trademarks and trade names are those of their respective owners.
Contact [email protected] to submit a
warranty claim.
Proof of purchase is required.
