VENTURER VCT9B06 Challenger 10 Pro 10.1-Inch 2-in-1 Tablet and Keyboard User Manual

June 5, 2024
VENTURER

VENTURER VCT9B06 Challenger 10 Pro 10.1-Inch 2-in-1 Tablet and Keyboard

VENTURER-VCT9B06 -Challenger-10-Pro-10.1-Inch 2-in-1-Tablet-and-
Keyboard-PRODUCTGetting started

Charging the tablet
Use ONLY the included AC Adaptor to charge the battery. The blue indicator blinks on the rear of the tablet while the battery is charging and it will stop blinking when it is fully charged.VENTURER-VCT9B06
-Challenger-10-Pro-10.1-Inch 2-in-1-Tablet-and-
Keyboard-1

IMPORTANT! Please Read.
We recommend fully charging your tablet before using it for the fi rst time. For optimum per formance, please connect the provided AC adaptor to your tablet when it falls below 20% charge.

Battery icon
The battery icon in the upper-right corner shows the battery level or charging status.Charging time will vary depending on remaining batter y level. VENTURER-VCT9B06 -Challenger-10-Pro-10.1-Inch 2-in-1-Tablet-and-
Keyboard-2Charging from 0%, should take approximately 4-5 hours. Use ONLY the included AC adaptor with the small round port. You may not be able to turn on your tablet for at least 30 minutes if the battery was fully drained.

NOTE
In order to keep the battery working in best condition, please pay attention to the following:

  • The included AC adaptor is for use with this unit only. Do not use it with other equipment.
  • Do not charge the battery in high temperatures.
  • Do not wait for the battery to be fully depleted before charging again. Keep the battery charged as needed.
  • If tablet has not been used for a long period of time, the battery might be in over discharge protection mode and may take longer to charge.

Prolong the Battery Life
Here are some tips for how to prolong the life of the battery:

  • If you aren’t using Wi-Fi, go to Settings -> Network & Internet -> Wi-Fi, turn it off .
  • Don’t leave the Maps or Navigation apps open on the screen when you’re not using them.
  • Turn down screen brightness and set a shorter screen timeout: Settings -> Display.
  • If you don’t need it, turn off automatic syncing for all apps: Settings -> Accounts -> Automatically sync data. This means you need to sync manually to collect messages, email, and other recent information, and won’t receive notifications when updates occur.

Turning your tablet ON

Press and hold the POWER button 4~5 seconds until the logo appears.

Starting for the first time

When using the tablet for the first time, you will be required to setup the following:

  1. Select the language, then tap
  2. Set the Wi-Fi.
  3. Tap a network name to see more details or connect to it, and enter a password if necessary.
  4. When prompted, sign in using the email address and password for your Google Account. If you don’t have one yet, go ahead and create one.
  5. Follow the onscreen instructions to setup the tablet.
  6. Swipe up from the bottom of the home screen to enter the all Apps menu.

In All Apps screen, you can:

  • Move between screens: Slide up or down.
  • Open an App: Tap its icon.
  • Copy an App icon to the Home screen: Press and hold the icon or widget icon slowly to drag it to the Home screen.
  • Get more apps: Tap the Google Play Store icon
  • View info about an App: Press and hold an App to display the App Info menu, then tap the App Info icon i.

Swipe up to unlock the screen

Getting to know your Tablet

Left side viewVENTURER-VCT9B06 -Challenger-10-Pro-10.1-Inch 2-in-1
-Tablet-and-Keyboard-5

  1. MicroSD card slot
    Accepts microSD card (up to 128G).

  2. DC jack
    Connects with 5V DC charger.

  3. Micro-USB port
    Connects to a PC or USB storage device.
    Uses to charge the tablet’s battery (for charging at either OFF mode or Standby mode).

  4. Headphones jack
    Headphones connection for personal listening.

  5. Power button
    Press to enter standby/wake up mode, and press and hold to switch the unit On/Off.

  6. Front camera

Rear view

VENTURER-VCT9B06 -Challenger-10-Pro-10.1-Inch 2-in-1-Tablet-and-
Keyboard-6

  1. Rear camera

  2. Reset
    Reset the tablet (then press and hold the Power button for 4~5 seconds to turn on the unit).

  3. Charging indicator
    Blue (blinking): Charging
    Blue: Fully charged

  4. Microphone
    For voice input.

  5. Volume +/- button
    Press to increase/decrease the volume.

Buttons

Power button

  1. Power the tablet On Press and hold the Power button for 4~5 seconds to turn on the tablet.

  2. Power the tablet Off
    Press and hold the Power button until the” Power off” message displays, then tap the onscreen message and the tablet will be powered off .

  3. Sleep mode
    Briefly press the Power button to put the tablet in sleep mode. If you don’t operate for some time, the tablet will enter sleep mode automatically.

Tip: You can go to Settings -> Display -> Screen timeout to set the screen timeout.

Wake the tablet from Sleep mode
Press the Power button to wake the tablet from sleep mode. To unlock the tablet, swipe up from the bottom of the screen.

Volume +/- buttons
Press the Volume +/- buttons to increase or decrease the volume.

Tip: You can go to Settings -> Sound to adjust volume settings.

Notification barVENTURER-VCT9B06 -Challenger-10-Pro-10.1-Inch 2-in-1
-Tablet-and-Keyboard-7

Notification & Status Bar

Some indicators informing you about the status of your tablet are shown at the top of the screen. For example, notifications may come from the system, a game, an application such as E-mail, or the music player.When Notifications are available, related icons will appear in the top left corner of the screen. To open the Notification & Status Bar, swipe down from the top of the screen.
You can swipe down on the notification panel a second time to expand the details of notifications and access the quick settings icons. Notifications can be deleted by sliding them away to the left or right, or by tapping CLEAR ALL. The quick settings icons allow you to adjust various tablet settings, including WiFi and Bluetooth connections, by tapping the corresponding icon.
Notification & Status Icons
The below table lists some of the frequently used icons in the Notification & Status bar:

Item Description

  • Message            Received new message.
  • Music               The Google Play Music app is running.
  • Wi-Fi               Has a Wi-Fi Internet connection.
  • Bluetooth        Bluetooth is on.

Home Screen Icons

  • Back Tap Back icon to return to the previous screen.
    • The Back icon remains on the bottom of the screen at all times, allowing you to navigate back to the previous
    • Once you go back to the Home screen, you can’t  go back any further in you
  • Home Tap Home icon from anywhere on your tablet to return to the Home screen.
  • Recent Apps Tap the Recent Apps icon to view recently used apps. Tap an app to use it again. To close an app that may be running in the background, swipe it to the left or right and it will be removed from the Recent Apps list. Volume Tap the Volume icon to increase volume. Tap the Volume icon to decrease volume.

Customizing the Home Screen

  • From All Apps screen to Home screen: Swipe up from bottom of the Home screen to enter All Apps screen, press & hold an icon slowly to drag it to the location of your choice. This makes it much easier to change your Home screen layout.
  • View widgets: Press & hold an empty part of your Home screen, and then tap the Widgets icon. Widgets are app information displays that can be placed on your Home screen.
  • Move apps or widgets: To relocate an icon or widget to another screen, press and hold the icon or widget and slowly drag it to the edge of the screen to switch it to another screen such as the home screen.
  • Delete apps or widgets: Press & hold an icon or widget and slowly drag it, when the “X” icon appears at the top of the screen, drag the icon or widget into it.
  • Press & hold an empty part of your Home screen, and the wallpaper icon will display, tap it and choose a wallpaper.

Connections and setup

VENTURER-VCT9B06 -Challenger-10-Pro-10.1-Inch
2-in-1-Tablet-and-Keyboard-8

MicroSD

Insert the microSD card into the tablet’s microSD slot until it clicks. To check the storage of the microSD card, go to Settings -> Storage. Remove the microSD card by pushing in on the card’s edge. The card will pop out and can be removed.

NOTE

  • You can use a micro SD card and micro SDHCTM card (up to 128GB, SD card not included).
  • Never remove or insert the micro SD card in On mode.

HeadphonesVENTURER-VCT9B06 -Challenger-10-Pro-10.1-Inch 2-in-1-Tablet-
and-Keyboard-9

Headphones can be connected to the tablet’s headphones jack.

Connect to a Wi-Fi network

VENTURER-VCT9B06
-Challenger-10-Pro-10.1-Inch 2-in-1-Tablet-and-
Keyboard-10

  1. Go to Settings -> Network & Internet, tap Wi-Fi to open the Wi-Fi screen and then tap Use Wi-Fi to turn it on.
  2. The device will scan Wi-Fi networks automatically and display the available names.
  3. If the device fi nds a network that it has connected to previously, it will connect to it automatically.
  4. Tap a network name to connect to it, and enter a password if necessary.
  5. If your network does not broadcast its SSID, tap + Add network and enter the Network SSID (name) of the network. If necessary, enter security or other network configuration details.

VPN (Virtual Private Network)
You can create a virtual private network ( VPN) and connect to your private network securely through a public network, such as the internet. You must set a lock screen PIN or password before you can use credential storage.
Add a VPN network and follow the instructions on the screen.

Bluetooth

You can use Bluetooth to communicate between the unit and other Bluetooth devices, such as wireless headphones or a smartphone.

VENTURER-VCT9B06 -Challenger-10-Pro-10.1-Inch 2-in-1-Tablet-and-
Keyboard-11

  1. Go to Settings -> Connected devices -> Connection preferences -> Bluetooth, tap Off to turn it on.
  2. It will scan automatically and display the available bluetooth devices. Be sure the device you want to connect to is in pairing mode. Follow the device’s instructions to enter pairing mode.
  3. Tap an available bluetooth device name to pair with it and follow the instructions to complete the pairing.

Receive Files
When the Bluetooth share icon is shown in the Notification bar, touch and drag it to open the Notification Shade. Tap the notification and follow the instructions to complete the receiving.
Send Files

  1. Go to All Apps -> Files.
  2. Select a file you want to send, touch & hold it until the Notification bar appears. Touch icon and select Bluetooth, then follow the instructions to complete the sending.

Basic operation

Using the Touchscreen
Here are some basic procedures for interacting with the touchscreen.

  1. Tap
    To select an item on the touchscreen, lightly tap it.

  2. Press & Hold
    In some instances, touching the item and holding your fi nger on it will present other options or menus.

  3. Drag or Swipe
    While holding an item such as an icon, it can sometimes be moved by dragging it to another area or screen. You may also be able to swipe your finger across a screen or item to navigate or move it.

  4. Zoom
    By placing two fingers on the screen, you can slide them apart to “Zoom In”, or pinch them together to “Zoom Out”.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals