KINGFISHER CLCH60LKSS Chimney Hoods Instruction Manual

KINGFISHER CLCH60LKSS Chimney Hoods

Product Information

Product Specifications:

• Model Numbers: CLCH60LKSS, GHCH60LKSS, CLCH90LKSS, GHCH90LKSS, CLCH60LKBL, GHCH60LKBL, CLCH90LKBL, GHCH90LKBL
• Installation Hardware Included: Yes
• Filter Type: CARBFILT4
• Filter Quantity: 2
• Power Supply: 6mm

Product Usage Instructions

Safety:

Before you start:

• All installation work must be carried out by a suitably qualified person following local building regulations and these instructions.
• Risk of electric shock and fire if cleaning is not done according to instructions.
• Use correct fixings suitable for the substrate and make sure they can support the weight of the appliance.
• Switch off the appliance at the mains before maintenance or cleaning.
• Avoid touching hot parts; keep children away unless supervised.
• Do not flam under the hood; regularly clean or replace the grease filter.
• Ensure full disconnection means are incorporated in the fixed wiring as per local rules.
• Check minimum distances between the hood and cooking vessels as specified for gas and electric hobs.
• Verify that the supplied voltage and frequency match the appliance rating plate before installation.

Installation:
Follow the provided installation manual step by step to ensure proper setup of the chimney hood.

Function & Setting:
Refer to the manual for information on different functions and settings available on the chimney hood.

Care & Maintenance:
Regularly clean and maintain the chimney hood as per the instructions to ensure optimal performance and longevity.

Declaration of Conformity:
Read the declaration of conformity section in the manual for information regarding product compliance with standards.

Frequently Asked Questions (FAQ):

• Q: Can I install the chimney hood myself?
  A: No, all installation work must be carried out by a suitably qualified person following local building regulations and the provided instructions.

• Q: How often should I clean or replace the grease filter?
  A: To avoid the risk of fire, it is recommended to clean or replace the grease filter regularly as specified in the manual.

IMPORTANT
These instructions are for your safety. Please read through them thoroughly before handling the product and retain them for future reference.

Models

• CLCH60LKSS
  5059340446189

• GHCH60LKSS
  5059340446172

• CLCH90LKSS
  5059340446165

• GHCH90LKSS
  5059340446158

• CLCH60LKBL
  5059340446141

• GHCH60LKBL
  5059340446134

• CLCH90LKBL
  5059340446127

• GHCH90LKBL
  5059340446110

Parts List

You will need

Safety Instruction

Before you start
These instructions are for your safety. Please read the following instructions carefully before proceeding with the installation and use of this appliance.

WARNING:
ALL INSTALLATION WORK MUST BE CARRIED OUT BY A SUITABLY QUALIFIED PERSON, STRICTLY FOLLOWING LOCAL BUILDING REGULATIONS AND THESE INSTRUCTIONS.

• To avoid the risks that are always present when you use an electrical appliance it is important that this cooker hood is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. After unpacking the cooker hood please check that it is not damaged. If in doubt, do not use the appliance but contact Customer Services on 0800 324 7818 (UK) and 1-800 932 230 (Eire).
• Check the package and make sure you have all of the parts listed and decide upon the appropriate location for your product. If this product contains glass please take care with fitting or handling to prevent personal injury or damage to the product. The specification plate shown on this appliance displays all the necessary identification information for ordering replacement parts. If you sell the appliance, give it away, or leave it behind when you move house, please ensure that you pass on this manual so that the new owner can become familiar with the appliance and its safety warning.
• WARNING: THERE IS A RISK OF ELECTRIC SHOCK AND FIRE IF CLEANING IS NOT CARRIED OUT BY THESE INSTRUCTIONS.
• WARNING: WHERE APPLICABLE, THIS APPLIANCE IS SUPPLIED WITH FIXINGS. PLEASE ENSURE YOU USE THE CORRECT FIXINGS SUITABLE FOR THE SUBSTRATE WHERE THE APPLIANCE WILL BE INSTALLED AND THAT THEY CAN SUPPORT THE WEIGHT OF THE APPLIANCE.
• WARNING: USE ONLY THE SAME SIZE OF FITTINGS AND MOUNTING SCREWS AS RECOMMENDED IN THIS INSTRUCTION MANUAL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRICAL HAZARDS.
• WARNING: SWITCH OFF THE APPLIANCE AT THE MAIN SUPPLY BEFORE CARRYING OUT ANY MAINTENANCE WORK OR CLEANING.
• WARNING: ACCESSIBLE PARTS MAY BECOME HOT WHEN USED WITH COOKING APPLIANCES. CHILDREN LESS THAN 8 YEARS OF AGE SHALL BE KEPT AWAY UNLESS CONTINUOUSLY SUPERVISED CARE SHOULD BE TAKEN TO AVOID TOUCHING THE APPLIANCE.
• WARNING: DO NOT FLY UNDER THE HOOD. TO AVOID THE RISK OF FIRE, CLEAN OR REPLACE THE GREASE FILTER REGULARLY AND CLOSELY MONITOR PANS CONTAINING HOT OIL.
• WARNING: MEANS FOR FULL DISCONNECTION MUST BE INCORPORATED IN THE FIXED WIRING BY THE LOCAL WIRING INSTALLATION RULES FOR YOUR COUNTRY. AN ALL-POLE DISCONNECTION SWITCH HAVING A CONTACT SEPARATION OF AT LEAST 3 MM IN ALL POLES SHOULD BE CONNECTED DURING INSTALLATION.
• WARNING: WHEN THE EXTRACTOR HOOD IS LOCATED ABOVE AN APPLIANCE, THE MINIMUM DISTANCE BETWEEN THE SUPPORTING SURFACE FOR THE COOKING VESSELS ON THE HOB AND THE LOWEST PART OF THE HOOD SHALL BE: GAS HOBS ≥ 760 MM ELECTRIC HOBS ≥ 650 MM
• WARNING: BEFORE CONNECTING THE HOOD, CHECK THAT THE SUPPLIED VOLTAGE AND FREQUENCY MATCH WITH THAT INDICATED ON THE APPLIANCE RATING PLATE. FAILURE TO INSTALL THE APPLIANCE BY THESE INSTRUCTIONS MAY RESULT IN A SAFETY HAZARD. IF IN DOUBT, ASK FOR ADVICE INSTORE OR FROM A QUALIFIED INSTALLER.
• WARNING: CONSULT LOCAL REGULATIONS REGARDING EXTRACTION OUTLETS AND ENSURE THESE ARE COMPLIED WITH. DO NOT CONNECT THE HOOD TO A VENTILATION OR HOT AIR DUCT CONTAINING COMBUSTION FUMES FROM BURNING GAS OR OTHER FUELS. CONFIRM THAT ROOM VENTILATION IS APPROPRIATE WITH THE LOCAL AUTHORITIES.
• WARNING: THE HOOD MAY STOP WORKING DURING AN ELECTROSTATIC DISCHARGE (E.G. LIGHTNING). THIS INVOLVES NO RISK OF DAMAGE. SWITCH OFF THE ELECTRICITY SUPPLY TO THE HOOD AND RECONNECT AFTER ONE MINUTE.
• WARNING: THIS APPLIANCE CAN BE USED BY CHILDREN AGED 8 YEARS AND ABOVE AND PERSONS WITH REDUCED PHYSICAL, SENSORY, OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING THE USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED. CHILDREN SHALL NOT PLAY WITH THE APPLIANCE. CLEANING AND USER MAINTENANCE SHALL NOT BE MADE BY CHILDREN WITHOUT SUPERVISION. KEEP THE APPLIANCE AND ITS SUPPLY CORD OUT OF THE REACH OF CHILDREN LESS THAN 8 YEARS OLD.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a safety hazard.
• Do not install the appliance outdoors in a damp place or in an area that may be prone to water leaks such as under or near a sink unit. In the event of a water leak affecting the appliance, do not use it and contact customer services to arrange for inspection.
• Do not use flammable sprays in close vicinity to the appliance.
• Please dispose of the packing material carefully. There is a fire risk if cleaning is not carried out according to the instructions. Refer to the Care and Maintenance sections carefully for details on how to clean and replace the aluminum and carbon filters (if fitted).
• The LED lamps in this appliance are not replaceable by the consumer. If a lamp fails, please contact the customer helpline at the end of Care & maintenance to arrange an engineer visit.
• Do not use a steam cleaner for care and maintenance.
• The appliance is not intended to be operated using an external timer or a separate remote control system.
• There shall be adequate ventilation in the room when the hood is used at the same time as appliances burning gas or other fuels. Ensure that the negative pressure of the installation site does not exceed 4 Pa (0.04 bar) to ensure combustion fumes are not drawn back into the room.
• Do not use the hood if it shows signs of damage or imperfection. Contact customer services for assistance.
• The manufacturer declines all liability for personal or material damage as a result of misuse or incorrect installation of this appliance.
• The appliance is for domestic use only as an extractor hood.

Electrical Installation
All installation must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate.

Direct Connection

• The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3 mm between the contacts.
• The installer must ensure that the correct electrical connection has been made and that it complies with the wiring diagram.
• The cable must not be bent or compressed.
• Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

IMPORTANT: THIS IS A CLASS I APPLIANCE AND MUST BE EARTHED.

This appliance is supplied with a 3-core mains cable colored as follows:

• Brown – L or Live
• Blue – N or Neutral
• Green and Yellow = E or Earth

This appliance should be connected directly to the consumer unit with a 3 Amp Residual Current Device (RCD) protecting its circuit.

To avoid the risks that are always present when you use an electrical appliance it is important that this appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. Please keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the appliance please check that it is not damaged. If in doubt, do not use the appliance but contact Customer Services.

The manufacturer declines all liability for damage caused to persons and objects due to incorrect or improper installation of the appliance. Any permanent electrical installation must comply with the latest wiring regulations applicable to your country and for your safety, a qualified electrician or contractor should undertake the electrical installation. The appliance is supplied from the factory to use external ducting (not supplied). Should you wish to use this in recirculation mode only, please fit the correct carbon filter (not supplied).

Technical Data

Frequency band| 434 MHz
Receiver category| 2

Information for EU No. 66/2014 and No. 65/2014

A. Information on the cooker hood (www.diy.com)

CLCH90LKSS / GHCH90LKSS / CLCH90LKBL / GHCH90LKBL
Annual Energy Consumption (AEC hood) (kWh/year)| 22.7
Energy Efficiency class| A+
Fluid Dynamic Efficiency| 33.6
Fluid Dynamic Efficiency class| A
Lighting Efficiency (LEhood) (lux/W)| 60 cm Link chimney hood: 44.4

90 cm Link chimney hood: 39.2

Lighting Efficiency class| A
Grease Filtering Efficiency (GFE hood)| 60 cm Link chimney hood: 65.2

90 cm Link chimney hood: 66.7

Grease Filtering Efficiency Class (GFEhood)| D
Minimum airflow at working point (in normal use) (m3/h)| 209.6
---|---
Maximum airflow at working point (in normal use) (m3/h)| 406.7
Maximum airflow at the highest setting (Qmax) (m3/h)| 427.4
Maximum airflow at the highest setting (Qmax) (m3/h) (with Boost)| 605
Weighted sound power level at minimum setting (LWA) (dB)| 47
Weighted sound power level at maximum setting (LWA) (dB)| 63
Sound power level of boost if any (LWA) (dB)| 71
Measured power consumption off mode (Po) (W)| 0.47
Measured power consumption in standby mode (Ps) (W)| –
Time increase factor (f)| 0.8
Energy Efficiency Index (EEIhood)| 42
Measured air flow rate at best efficiency point (QBEP) (m3/h)| 329.6
Measured air pressure at best efficiency point (PBEP) (Pa)| 240
Measured electric power input at best efficiency point (WBEP) (W)| 65.4
Nominal power of the lighting system (WL) (W)| 5.0
Average illumination of the lighting system on the cooking surface (Emiddle) (lux)| 60 cm Link chimney hood: 222

90 cm Link chimney hood: 196

The measurement and calculation method of the above table was done by Commission Delegated Regulation (EU) No 65/2014 & Commission Regulation (EU) No 66/2014.

B. The following shows how to reduce the total environmental impact (e.g. energy use) of the cooking process.

1. Install the cooker hood in a proper place where there is efficient ventilation.
2. Clean the cooker hood regularly so as not to block the airway.
3. Remember to switch off the cooker hood light after cooking.
4. Remember to switch off the cooker hood after cooking.

C. Information for dismantling.

• This appliance cannot be dismantled by the user, other than that as shown in the original assembly of the user manual.
• At the end of its useful life, the appliance should not be disposed of with household waste. Check with your local governmental authority, domestic waste disposal services, or the retailer where the product was bought for recycling advice.

Disposal and Recycling

Waste electrical products (WEEE) should not be disposed of with household waste. Please recycle where facilities exist. Check with your local governmental authority, domestic waste disposal services, or the retailer where the product was bought for recycling advice. The wheelie bin symbol on the product or its packaging indicates that this product cannot be treated as normal household waste. This product must be handed over to an electric and electronic equipment collection point for recycling. By ensuring that this product is disposed of correctly, you will help to avoid possible negative consequences for the environment and public health, which could occur if this product is not handled correctly.

Guarantee

We take special care to select high-quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This cooker hood has a manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in-store) or date of delivery (if bought online), at no additional cost for normal (non- professional or commercial) household use.

To claim this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice, or other evidence admissible under applicable law), please keep your proof of purchase in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second- hand or display products. Unless stated otherwise by applicable law, any replacement product issued under this guarantee will only
be guaranteed until the expiry of the original period guarantee period.

This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care, and maintenance in accordance with the information contained in these terms and conditions, in the user manual, and standard practice, provided that standard practice does not conflict with the user manual.

This guarantee does not cover defects and damage caused by normal wear and tear or damage
that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labor, etc), or direct and indirect damage.
If the product is defective, we will, within a reasonable time, repair it.
Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee-related queries should be addressed to the store you purchased this product from.
The guarantee is in addition to and does not affect your statutory rights.

IMPORTANT
RETAIN THIS INFORMATION FOR FUTURE REFERENCE: READ CAREFULLY.

Installation

1A
See sections 8A-10A

Vent pack (Ø150 mm)

1B
See sections 8B-9B

Choose a type of installation: Ducted option A (extraction to the outside) or Recirculation option B (no extraction to the outside). This appliance is for installation on a wall only.

• Mark the wall with the hole positions as shown in the diagram. The fixings supplied are suitable for solid walls only. When fixing to any other type of wall use suitable alternative fixings.
• WARNING: Caution! Before drilling it is extremely important to check the wall for hidden pipes and electrical cables using an appropriate detection device. Ensure that all safety distances to flammable materials are followed as shown above.
• Drill the holes, and insert the wall plugs in all 6 holes. Insert the screws in the holes in the second row from the bottom. The maximum gap between row two and row three from the bottom should be between 500-720 mm, dependent upon the ceiling height.
• WARNING: Use only the same size of fittings and mounting screws as recommended in this instruction manual. Failure to follow these instructions may result in electrical hazards.
• WARNING: Please follow the Safety and Electrical Installation sections at the start of this manual before connecting this appliance to the main supply!

Remove protective film (stainless steel only). Tighten all screws.

Use

Before you start

WARNING:
READ THE INSTRUCTIONS BEFORE USING THE APPLIANCE.

Switch on the Residual Current Device (RCD) at the consumer unit. The appliance is ready for use.

Functions & Settings

Control Panel

To obtain the best results from your cooker hood it is recommended that you leave it switched on for up to 15 minutes after you have finished cooking.

To Set Up For First Use

IMPORTANT:
COMPLETE THIS SETUP WITHIN TWO MINUTES OF TURNING ON THE RESIDUAL CURRENT DEVICE (RCD).

• Ducted Option : This is the factory default setting if you are extracting air from the outside.
• Recirculation Option : This is the option to be used with carbon filters.
• To change to this option, press both Speed icons together and the Timer will flash red.
• Press the Speed Increase to change to the Recirculation Option and the Speed Reduction to revert to the Ducted Option . Finally, press both Speed icons together one more time to confirm the change and the Timer will stop flashing.

General Use

Light On/Off

• Use this control to switch the light on independently of the fan motor, it will be lit red in this mode.
• When the fan is in use, and the light is off, the icon will be lit white in this mode but will turn red if the light is then switched on.

Fan On/Off and Speed Reduction

• Press this icon once to turn on the fan motor at speed 1. All icons will be white and the light icon will be red if already in use.
• If the motor is on speed 1, pressing and holding this icon for two seconds will turn off the fan motor. As above, the light control is independent of this operation.
• If the motor is higher than speed 1, this will reduce the fan speed with each press of the icon.

LED Display
Shows the extraction mode during set up and the motor speeds from 1-5, and P for Boost.

Boost Function and Speed Increase

• Press this icon once to turn on the fan motor at full power, and P will flash in the display.
• If the motor is already on speed 1-5, each press of this icon will increase the fan speed accordingly.
• If you press and hold the icon for two seconds, the fan speed will increase to full power and P will flash in the display.

Setting the Timer

• When the fan motor is on and the Timer icon is pressed, it will be red and the current speed in the display will start to flash and continue until the timer cycle has completed.
• The chosen speed level will remain in use for five minutes before dropping down to the next lowest speed. This speed will remain in operation for two minutes before dropping down again. This will be repeated every two minutes unless the speed is already at level 1 and then the fan will turn off. If the light is already on, this will also be turned off.
• Pressing the Speed Reduction icon or Speed Increase icon during a current timer program will restart the countdown process again with a five-minute cycle.
• If the Timer icon is pressed again during a current timer program, the cycle will be canceled, the icon will revert to white and the current fan speed will remain on indefinitely.
• The maximum timer program cycle is 15 minutes: 5 minutes on P and then 2 minutes each on speed 5 down to speed 1.

Controlling the cooker hood remotely

IMPORTANT:
THIS SECTION IS ONLY APPLICABLE IF YOU HAVE ALSO PURCHASED A COMPATIBLE HOB WITH RADIO FREQUENCY (RF) CAPABILITY. CONTACT THE CUSTOMER HELPLINE AT THE END OF THIS MANUAL FOR COMPATIBLE MODELS.

The process of connecting the hood to the hob happens in three stages:

• Configure the hob to transmit a radio frequency signal.
• Configure the hood to receive this signal.
• Lock the connectivity between the two appliances and complete the pairing process.

IMPORTANT:
COMPLETE THIS SETUP WITHIN TWO MINUTES OF TURNING ON THE RESIDUAL CURRENT DEVICE (RCD).

Controlling the cooker hood from your hob
Ensure the hob and hood connectivity has been completed and the Hood connection button is ON!

1. Make sure that the hob and the hood are switched off.

2. After around ten seconds, turn on the hob, and press the Timer icon and Light icon together on the control panel. The LED display will alternately flash red and white.

3. Turn on the hob and make sure the connectivity indicator is lit.
   NOTE: Touch the connectivity key on the hob if it is not lit.

4. Press the two front cooking zone keys together on the hob and the connection indicator will flash to confirm the connection.

5. The control panel of the hood will show “A” for five seconds to indicate connectivity has been made with the hob.

6. Press the two front cooking zone keys together on the hob before “A” disappears to store the connectivity settings.

IMPORTANT:
THE EXTRACTION RATE OF THE HOOD WILL VARY BASED UPON THE TOTAL POWER OUTPUT SELECTED ON THE HOB, AS SHOWN IN THE TABLE BELOW.

EACH HOB COOKING ZONE HAS A MAXIMUM RATED OUTPUT OF 10 COMPRISING 1-9 AND BOOST (10).

zones in use, and the combined output is 8 or less. For example, zone 1 is on 2, and zone 2 is on 5.
Speed 3| This speed will be selected when there are no more than three cooking zones in use, and the combined output is between 9 and 24. For example, zone 1 is on 7, zone 2 is on 6, and zone 3 is on Boost (10).
Speed 5| This speed will be selected when all four cooking zones are in use, or the combined output is between 25 and 35. For example, zone 1 is on 7, zone 2 is on 7, zone 3 is on 6, and zone 4 is on Boost (10).
Speed P – Boost| This speed will be selected when more than 3 cooking zones are in use, and the combined output is 36 or higher.

NOTE:
Speed 2 and Speed 4 on the hood are not available when using this function.

• If the hood controls are manually overridden when the hob and hood are linked, the hood will operate for five minutes on this manual setting before returning to control by the hob.
• To reconnect the hood and hob immediately, press the Timer and Light together.

Stopping the connectivity function

1. Touch the connectivity key on the hob, the indicator light will go out and the link will be dropped. To reconnect again, press the connectivity key on the hob again.
2. If the hob is switched off, the hood will continue to operate independently in Timer mode and the current speed will flash. The current speed level of the hood will continue for 5 minutes and step down for 2 minutes at each level until finally switching off.

Troubleshooting

out by qualified service personnel only.
The fan motor is not fixed tightly.
The light is on, but the fan does not work.| The fan blade is jammed.
The motor is damaged.
Both the light and motor do not work.| The light bulb has blown.| Ring the customer helpline at the end of the Care & Maintenance section to arrange an engineer visit.
The power connection is loose.| Check the power supply.
Suction performance reduced.| Speed may be too low.| Select a higher speed.
Aluminum filters are dirty.| Clean the aluminum filters. (See Care and Maintenance section).
The top vent might be obstructed.| Clear any obstruction.
An optional vent kit might be twisted.| Ensure that the vent kit is fitted according to the manufacturer’s instructions.
The installation may not comply with the manufacturer’s instructions.| The vent hose should be the correct diameter throughout with no reductions or restrictions. (See installation section).
Works normally but the cooking smells linger.| The carbon filter is not fitted in recirculation mode or is full of grease.| Fit the carbon filter or replace the carbon filter (See Care and Maintenance section).

This appliance respects laws regarding the suppression of radio interference. As the Manufacturer has a policy of continuous product improvement, it reserves the right to adapt and carry out any modification considered necessary without prior warning.

Care & maintenance

IMPORTANT:
TURN OFF THE POWER AT THE RESIDUAL CURRENT DEVICE (RCD) BEFORE REPLACING THE CARBON FILTERS.

Carbon filter replacement
Replace carbon filters every three months.

• Use two carbon filters, model CARBFILT4 3663602843092 available from the Customer helpline. See the Care & Maintenance section for details.
• If the motor is off, and after the fan has been in operation for approximately 150 hours, the display will show and the Timer will flash red to advise you to replace the carbon filters. After replacing the filters, reset the alert by pressing the Timer icon .

WARNING:
ALWAYS SWITCH OFF THE ELECTRICAL SUPPLY BEFORE CARRYING OUT MAINTENANCE WORK ON THE HOOD. IN THE EVENT OF A FAULT, CONTACT CUSTOMER SERVICES.

Aluminum grease filter cleaning
Aluminum filters: To avoid fires, clean thoroughly once a month. Remove the grease filters as shown and soak them in hot water and detergent for an hour. If using a dishwasher position the filters vertically to improve the cleaning process.

If the motor is off, and after the fan has been in operation for approximately 50 hours, the display will show and the Timer will flash red to advise you to clean the aluminum grease filters. After cleaning the filters, reset the alert by pressing the Timer icon .

WARNING:
INCREASE THE FILTER CLEANING/REPLACEMENT FREQUENCY IF THE HOOD IS USED FOR MORE THAN 2 HOURS A DAY. ALWAYS USE GENUINE FILTERS FROM THE MANUFACTURER.

Lamp replacement
The LED lamps in this appliance are not replaceable by the consumer. If a lamp fails, please contact the Customer helpline to arrange an engineer visit.

Customer helpline (toll-free):

• UK 0800 324 7818 uk@kingfisherservice.com.
• Eire 1-800 932 230 eire@kingfisherservice.com.

Declaration of Conformity

(UK) Declaration of Conformity

Name and address of the manufacturer or his authorized representative:
Kingfisher International Products Limited, 3 Sheldon Square, London W2 6PX, United Kingdom

This declaration of conformity is issued under the sole responsibility of the manufacturer. The object of the declaration:

• Product: Chimney Cooker Hood
• Model: CLCH60LKSS / GHCH60LKSS / CLCH60LKBL / GHCH60LKBL/CLCH90LKSS / GHCH90LKSS / CLCH90LKBL / GHCH90LKBL
• EAN: 5059340446189 / 5059340446172 / 5059340446141 / 5059340446134 / 5059340446165 / 5059340446158 / 5059340446127 / 5059340446110

The object of the declaration described above conforms with the relevant legislation: Radio Equipment Regulations 2017 as amended

References to the relevant designated standards used or references to the other technical specifications about which conformity is declared:

• EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021
• EN 60335-2-31:2014
• EN 62233:2008
• EN 55014-1:2006 + A1:2009 + A2:2011
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 55014-1:2017 + A11:2020
• EN 55014-2:2015
• EN 61000-3-3:2013 + A1:2019
• EN 61000-3-2:2019
• EN 301 489-1 V2.2.3:2019-11
• EN 301 489-3 V2.1.1:2019-03
• EN 300 220-2 V3.1.1:2017-02
• EN 62479:2010
• BS EN 60335-1:2012 + A15:2021
• BS EN 60335-2-31:2014
• BS EN 62233:2008

Signed for and on behalf of:
Kingfisher International Products Limited, 3 Sheldon Square,
London W2 6PX, United Kingdom on 07-04-2022.

David Awe
Group Quality Director

(EU) Declaration of Conformity

Name and address of the manufacturer or his authorized representative:
Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands

This declaration of conformity is issued under the sole responsibility of the manufacturer. The object of the declaration:

• Product: Chimney Cooker Hood
• Model: CLCH60LKSS / GHCH60LKSS / CLCH60LKBL / GHCH60LKBL/CLCH90LKSS / GHCH90LKSS / CLCH90LKBL / GHCH90LKBL
• EAN: 5059340446189 / 5059340446172 / 5059340446141 / 5059340446134 / 5059340446165 / 5059340446158 / 5059340446127 / 5059340446110

The object of the declaration described above conforms with the relevant Union harmonization legislation:
2014/53/EU as amended Radio Equipment Directive

References to the relevant harmonized standards used or references to the other technical specifications in relation to which conformity is declared:

• EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021
• EN 60335-2-31:2014
• EN 62233:2008
• EN 55014-1:2006 + A1:2009 + A2:2011
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 55014-1:2017 + A11:2020
• EN 55014-2:2015
• EN 61000-3-3:2013 + A1:2019
• EN 61000-3-2:2019
• EN 301 489-1 V2.2.3:2019-11
• EN 301 489-3 V2.1.1:2019-03
• EN 300 220-2 V3.1.1:2017-02
• EN 62479:2010

Signed for and on behalf of:
Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands on 07-04-2022.

David Awe
Group Quality Director

Manufacturer

UK Manufacturer:
Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX United Kingdom

EU Manufacturer:

• Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands.
• www.kingfisher.com/products
• www.diy.com.
• www.screwfix.com
• www.screwfix.ie.

Customer Helpline (Freephone)

• UK 0800 324 7818 uk@kingfisherservice.com
• Eire 1800 932 230 eire@kingfisherservice.com.

To view instruction manuals online, visitwww.kingfisher.com/products.

References

• Brico Depôt | Bricolaje, jardín, construcción y climatización
• Brico Dépôt : Magasin de bricolage
• Brico Depôt | Bricolage, construção, jardim e climatização
• Bricolage, jardinage et aménagement de la maison | Castorama
• B&Q | DIY Products at Everyday Low Prices | DIY at B&Q

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>