OPT7 LIGHTING V1 Aura LED Lighting Kit Installation Guide
- June 8, 2024
- OPT7 LIGHTING
Table of Contents
QUANTUM ROCK LIGHTS
INSTALL GUIDE
V1 Aura LED Lighting Kit
FULL-SIZE
REMOTE CONTROL BUTTON LAYOUT
SPECIFICATIONS
Wattage
8W Per Pod
Amp Draw
8A
8 LEDs
Quad-Core CREE
Brightness
1,600 Lumens Per Pod
Voltage
12V
Resistance
IP68 Water-Resistant (Pod Only)
Operating Temperature -20°-150°F
-
ON & OFF
Only control “RGB” light -
Dimmer +/-
Brightness Setting: 50 Levels -
Color Selector
20 different solid modes -
Independent Control Of White Light
ON & OFF
Dimmer +/- –
Brightness Setting: 50 Levels
Default brightness
Brightness Setting: 4 Levels -
Style Mode
3 Color Cycle
Default 3 color variations (Random) Supports brightness and speed adjustment
– 3 Fade
– Default 3 color variations (Random)
Supports speed adjustment
7 Color Cycle
– Default 7 color variations (Random)
Supports brightness and speed adjustment
Beat/SoundSYNC
– Default 20 color variations (Random)
Supports brightness adjustment Strobe
– Default 20 color variations (Random)
Supports brightness and speed adjustment
AUTO
Play all dynamic style modes -
Quick/Slow
Speed Setting : 10 Levels
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
2 YEAR WARRANTY
INSTALLATION STEPS
TOOLS REQUIRED
- 5/32-inch Drill Bit
- 7/64-inch Drill Bit
- Phillips Head Screwdriver
-
Designate your mounting locations for each Rock Light Pod and the control box. (Refer to page 2 for recommended mounting locations)
Avoid hot surfaces and/or moving parts. -
Use a pen to mark the holes where you want to mount the Rock Light Pods. Then, drill a 5/32” hole(s) for the wire connector to pass through.
-
4 Drill a 7/64” hole for each marked hole.
-
Secure the Rock Light Pods using the included screws. (If mounting on a rounded or uneven surface, utilize the optional rubber mounting pads.)
Caution: Rock Light Pods become extremely hot during use – keep away from any vehicle parts that may be damaged by exposure to high temperatures. -
Connect all Rock Light Pod lines to the control box connectors. Secure by twisting.
NOTE: CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely hidden from exposing elements of moisture.
HOW TO CONNECT POWER HARNESS TO YOUR VEHICLE
– Connect the Red line(+) of power hareness to the vehicle battery’s positive
terminal.
– Connect the Black line (-) of power hareness to the vehicle battery’s
negative terminal or an unpainted area on your vehicle’s frame.
WARNING
- Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10AMPs or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85 ℃ or 185 ℉.
If you are uncomfortable performing work of this nature yourself, then do not hesitate to consult a professional for help. Working with a vehicle’s electrical system can be hazardous to an unqualified individual. OPT7 is not liable for damages or personal injuries while installing this product. The installation guide is provided as assistance to reduce set up time.
WHERE TO INSTALL
RECOMMENDED LOCATIONS FOR ROCK LIGHT PODS
Documents / Resources
| OPT7
LIGHTING V1 Aura LED Lighting
Kit
[pdf] Installation Guide
V1, Aura LED Lighting Kit, LED Lighting Kit, Aura Lighting Kit, Lighting Kit,
Aura Lighting, Lighting
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>