V2 Snap Screen User Guide

V2 Snap Screen

13.3″ Snap Screen
USER GUIDE

Check out our interactive Getting Started Guide at www.thexebec.comlgetstarted

SNAP SCREEN OVERVIEW

What’s Included

• Snap Screen
• • Snap Bracket sold separately

Snap Screen Functionality

1. LCD Display

2. Decrease Brightness/ Menu Up

3. Increase Brightness/ Menu Down

4. Short Press: Menu/ Enter

5. Long Press: Back
   Xebec Snap Connection

6. Use for Landscape Mode on Left Side

7. Use for Portrait Mode on Left & Right Sides

8. Use for Landscape Mode on Right Side

SET IT UP

Check out our interactive Getting Started Guide at www.thexebec.comlgetstarted Reference the instructions below:

Attach

1. Grab the Snap Bracket and place your thumbs on either side.
2. Expand the bracket to the width of your laptop screen.
3. Place the bracket over the back of the laptop screen.
4. Slowly release, allowing the bracket to hug the edges and sit on top of your laptop screen.
5. Release and extend the kickstand for extra support if needed. See page 9 for more details.

Plug: Dual-Screen
If your laptop has a USB-C port*:

1. Remove the cable from the cable head holster on whichever side you are using.
2. Plug the cable into your laptop.
3. If this port is used to charge your laptop, plug your laptop charger into the pass-through charging port. See page 9 for more details.

*Some USB-C ports do not support display. If no display occurs, see details below on how to download the DisplayLink driver.

If your laptop does not have a USB-C port:

1. Download the driver using the following link. www.thexebec.com/drivers
2. Remove the cable from the cable head holster on whichever side you are using
3. Plug one of the USB-A to C Adapters (included with the Snap Bracket) into the cable, and plug the USB-A end into your laptop’s USB-A port.

Plug: Tri-Screen
Follow the Dual-Screen instructions on page 5 for the first Snap Screen, and repeat for the second Snap Screen.
If your laptop has two USB-C ports:

1. Remove the second cable from the cable head holster.
2. Plug the second cable into your laptop’s second USB-C port.
3. Reminder, if this port is used to charge your laptop, plug your charger into the pass-through charging port. See page 9 for more details.

If your laptop has only one or no USB-C ports:

1. Download the driver using the following link. www.thexebec.com/drivers
2. Remove the second cable from the cable head holster.
3. Plug one of the USB-A to C Adapters (included with the Snap Bracket) into the cable, and plug the USB-A end into your laptop’s USB-A port.

Snap

1. Rotate the wing(s) out from behind the Snap Bracket by placing your fingers under the wing and pulling.

2. Dual-Screen: Use the wing on the same side as the cable you used.

3. Tri-Screen: Use both wings.

4. Rotate the Snap Screen to your desired orientation (horizontal or vertical) and snap it onto the wing.

5. The X-shaped Xebec Snap Connection on the back of the Snap Screen will snap onto the front of the wing.

6. Reference pages 13-14 for all viewing options, including which Xebec Snap Connection to use for each configuration .

7. The Snap Screen(s) will then turn on automatically.

CONFIGURE YOUR DISPLAY

• Xebec Display App
  • Configure your Snap Screen display with ease!
  • To download and use the app, go to the following link and follow the instructions. www.thexebec.com/downloads
  • Our display app allows you to configure your Snap Screen displays directly from your laptop’s menu bar instead of navigating through your display settings.
• With the display app, you can:
  • Arrange your screen(s)
  • Switch the screen orientation between landscape & portrait
  • Select your preferred zoom level
  • If you prefer to use your laptop’s native display settings, reference the PC and Mac instructions on pages 16-17 in the Appendix.

SNAP BRACKET FEATURES

Pass-Through Charging

• If the Snap Bracket takes up your laptop’s charging port, use the pass-through charging feature to charge your laptop.
• Plug your charger into one of the Snap Bracket’s pass-through charging ports, located on both sides of the bracket.
• If you’re only using one Snap Bracket wing, you must use the pass-through charging port on the same side.

Kickstand
To provide extra screen support, an extendable kickstand is built into the back of your Snap Bracket.

1. Press the button.
2. Pull down the kickstand.
3. Extend the foot to the desired length (optional).
4. When you’re done, push the foot back in and lift the kickstand into the slot until you feel a click.

PACK UP & GO

Snap Bracket
Leave the Snap Bracket on or pack it separately, the choice is yours!
For the most convenient storage, simply pack up your laptop with the Snap Bracket still on.

• Remove the Snap Screen(s).
• Rotate the wing(s) back into their original position.
• Unplug the cable(s) from your laptop & place them back into the cable head holsters.
• Close your laptop.

Tight on space? Pack it up separately.

Snap Screen Travel Case
We recommend using the Snap Screen Travel Case 13″ to transport your Snap Screen(s).

TECH SPECS

• 13.3″ (diagonal), Full HD LCD IPS Panel
• 1920 x 1080 Resolution
• 16:9 Aspect Ratio
• 60hz Refresh Rate
• Adjustable Brightness up to 400 Nits
• Power Consumption: 3.6-4W (per screen)
• Material: Anodized Aluminum
• Vertical and Horizontal Screen Orientation
• Weight 1 lb
• Dimensions: 12.4″ x 7.4″ x 0.33″

Additional Help
Have more questions? Scan the QR code to access our Support Center at www.thexebec.com/troubleshoot

Need more support? Contact us at contact@thexebec.com
Want to be featured? Tag us on social media with your favorite shot using the Xebec Snap! Use the hashtags #Xebec and #FreeYourself

VIEWING MODES

Use the setup that’s best for you. Then change it up, whenever you want.

CONFIGURATIONS [TRI-SCREEN]

Tri-Screen

CONFIGURATIONS [DUAL-SCREEN]

Dual-Screen

DISPLAY SETTINGS [PC]

Screen Arrangement

1. Go to your Display Settings – (click Start> Settings> System > Display). The images below may differ depending on your operating system version.
2. Ensure the “Extend … ” option is selected unless you intend to use presentation mode.
3. Click “Identify” and a number will appear on each of your physical screens.
4. Click and drag the numbered boxes to match the order in which the numbers appeared on your screens.

• Screens 3 and 2 may need to be swapped
  If you’re using the Dual-Screen, only two boxes will appear

Screen Orientation

1. Scroll down to the “Scale and layout” section.
2. Select your desired zoom level.
3. Select your desired orientation.
4. For horizontal mode, select “Landscape”.
5. For vertical mode, select “Portrait”.

• “Landscape {flipped)” or “Portrait {flipped)” may need to be selected based on your specific setup

DISPLAY SETTINGS [MAC]

Screen Arrangement

1. Go to your Displays Settings – (click System Settings> Displays) and click Arrange. The images below may differ depending on your operating system version.
   Ensure “Extended display” is selected for the external displays.

2. Click each external display icon and note on which of your physical screens a red frame appears.

3. Click and drag the external display icons so that they are on the same side as their associated screens with a red frame.

4. Ensure the white bar is on the display icon representing your laptop screen, and click & drag it there if not.

5. Click “Done”.

Screen Orientation

1. Ensure “Extended display” is selected.
2. For portrait mode, select 90 degree rotation for a left screen and 270 degree rotation for a right screen.
3. Select your preferred zoom level from the resolutions, e.g., 1280 x 720. You may click the “Show all resolutions” toggle icon to view more options.

PRODUCT SAFETY

General Safety & Handling

• Carefully review each step in this user manual as well as the on line documentation before setting up your Xebec Snap Screen. Use the provided cables and accessories as directed in this manual to avoid damaging the product. Using third party cables may cause damage to your laptop.

• If any part is broken or damaged, do not attempt to fix yourself, as this
  will void your warranty. Instead, please contact the retailer, or email us at contact@thexebec.com . Refer to the warranty on pages 20-21 for additional details.

• Store the Xebec Snap Screen in appropriate conditions, avoiding exposure to moisture, dust, and extreme heat or cold. Please use caution when storing the Xebec Snap Screen and avoid putting excessive amounts of pressure or weight on the product.

• In the event that there is any liquid spilled on the Xebec Snap Screen, unplug all the cables immediately and dry the entire product off with a dry soft towel. Wait for it to dry entirely before using again. To avoid an electric shock, unplug all the cables before cleaning the screens. Only clean with a soft, dry, lint-free cloth.

Choking Hazard
The Xebec Snap Screen and its accessories contain small parts that may present a choking hazard. Please keep out of reach from small children.

FCC COMPLIANCE

This part complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Note

• This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna
  • Increase the separation between the device and receiver
  • Connect the device into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/television technician for help

WARRANTY

• This Limited Warranty gives You specific legal rights, and You may have other rights which vary from country to country or state to state. The Limited Warranty can also be found on line at www.thexebec.com.

• We warrant that during the warranty period, the Product (defined as products sold by Xebec, limited to “Snap Screen”) will be free from defects in manufacturing, materials and workmanship under normal use for the Warranty Period (as defined below), subject to conditions contained in this limited warranty. We do not warrant, and are not responsible for, any laptop or other device made by anyone other than Xebec, Inc. We limit the duration and remedies of all implied warranties, including without limitation the warranties of merchantability and fitness for a particular purpose to the duration of this express limited warranty.

• Who May Use This Warranty?
  Xebec, Inc. (“We”, “Xebec” or “Us”) extend this limited warranty only to the consumer who originally purchased the Product (“You”) from us or a Xebec authorized dealer, unless otherwise prohibited by law. This Limited Warranty is extended only to the original end-use customer, and will not be extended to any other person or transferee.

• What Does This Warranty Cover?
  This Limited Warranty covers any defects in manufacturing, material or workmanship in the Product under normal use for the Warranty Period, subject to conditions contained in this limited warranty. During the Warranty Period, We will repair or replace, at no charge, Products or parts of a Product that prove defective because of improper manufacturing, material or workmanship.

• How Long Does The Coverage Last?
  The Warranty Period is 1 year from the original date of purchase of the Product.

• Sole and Exclusive Remedy; What Will We Do to Correct the Problem?
  If a manufacturing, material or workmanship defect arises regarding any Product, and We receive a valid claim no later than fifteen (1 S) calendar days after the expiration of the Warranty Period, We will, at our sole option, provide one of the following remedies to satisfy a proper claim under this limited warranty: Repair or replace any defective or malfunctioning part at no charge, using new or refurbished replacement parts. Replace this product with a new Xebec Tri- Screen (the “Product”) at no charge. For purposes of this Limited Warranty, “refurbished” means a product or part that has been substantially returned to its original specifications. In the event of a defect, these are customer’s sole and exclusive remedies.

• Exclusions and Limitations; What Does the Warranty Not Cover?

  • Except for the remedies expressly set forth above or to the extent restricted or prohibited by applicable law, the entire risk as to the quality and performance of the Products is with the customer, and the customer assumes the entire cost of repair should the Products prove defective following their purchase. In addition to and without limiting the generality of the foregoing disclaimers, this Limited Warranty does not, under any circumstances, cover any defects or damage due to: (a) transportation; (b)storage; (c) improper or unreasonable use or maintenance; (d) failure to follow the product instructions; (e) modifications; (f) unauthorized repair; (g) normal wear and tear or otherwise due to the normal aging of the Product; (h) cosmetic damage, including but not limited to scratches, dents and broken plastic or screen unless failure has occurred due to a defect in manufacturing, materials or workmanship; (i) damages caused by use with non­Xebec products; or U) external causes such as accidents, abuse, or other actions or events beyond our reasonable control. If this product is returned to Xebec, Inc., this product must be insured during shipment, with the insurance and shipping charges prepaid by you. If this product is returned uninsured, you assume all risks of loss or damage during shipment.
  • FOR CUSTOMERS WHO ARE COVERED BY AN APPLICABLE CONSUMER PROTECTION LAW OR REGULATION IN THEIR STATE, PROVINCE, OR COUNTRY OF PURCHASE ORRESIDENCE, THE BENEFITS TO CUSTOMER UNDER THIS LIMITED WARRANTY ARE IN ADDITION TO OTHER RIGHTS AND REMEDIES OF CUSTOMER UNDER SUCH LAWS OR REGULATIONS. SUCH BENEFITS MAY INCLUDE ADDITIONAL WARRANTIES OR RIGHTS RELATING TO THE PERFORMANCE OF THE PRODUCT AND REMEDIES APPLICABLE IN THE EVENT OF A DEFECT. THIS LIMITED WARRANTY WILL BE INTERPRETED UNDER THE LAWS OR REGULATIONS THAT APPLY TO CUSTOMER IN ANY STATE, PROVINCE, OR COUNTRY, AND ANY PROVISION OF THIS LIMITED WARRANTY THAT CONFLICTS WITH ANY SUCH CUSTOMER RIGHTS OR BENEFITS IS NOT APPLICABLE TO CUSTOMERS COVERED BY SUCH LAW OR REGULATION, SO THE EXCLUSIONS AND LIMITATIONS SET OUT IN THIS LIMITED WARRANTY MAY NOT APPLY, OR MAY NOT FULLY APPLY, TO CUSTOMER.

Warranty Disclaimers
EXCEPT AS EXPRESSLY SET FORTH ABOVE, EACH PRODUCT IS PROVIDED SOLELY ON AN “AS IS” BASIS AND WE MAKE NO OTHER WARRANTIES OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, WE SPECIFICALLY DISCLAIM AND EXCLUDE ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, QUIET ENJOYMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF SUCH DISCLAIMER OF ANY IMPLIED WARRANTY IS NOT PERMITTED BY LAW, THE DURATION OF SUCH IMPLIED WARRANTY IS LIMITED TO THE DURATION OF THE WARRANTY PERIOD APPLICABLE TO THE PRODUCT AS SET FORTH ABOVE. SOME STATES, PROVINCES AND COUNTRIES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO CUSTOMER. IF APPLICABLE LAW SPECIFIES A MINIMUM WARRANTY PERIOD THAT IS LONGER THAN THE APPLICABLE WARRANTY PERIOD SET FORTH IN THIS LIMITED WARRANTY, THEN THE APPLICABLE WARRANTY PERIOD FOR PRODUCTS SUBJECT TO SUCH APPLICABLE LAW WILL BE CONFORMED TO THE MINIMUM PERIOD SO REQUIRED. THIS LIMITED WARRANTY GIVES CUSTOMER SPECIFIC LEGAL RIGHTS AND CUSTOMER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE ANDPROVINCE TO PROVINCE AND FROM COUNTRY TO COUNTRY.

Limitation of Liability
IN NO EVENT, UNDER ANY CAUSE OF ACTION OR THEORY OF LIABILITY, WILLWE, OUR DISTRIBUTORS, OR SUPPLIERS BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY OR PUNITIVE DAMAGES, OF ANY NATURE WHATSOEVER, ARISING OUT OF THE USE OF OR INABILITY TO USE ANY PRODUCT, INCLUDING,WITHOUT LIMITATION, PROPERTY DAMAGE, LOSS OF VALUE OF THE PRODUCTOR ANY THIRD PARTY PRODUCTS THAT ARE USED IN OR WITH THE PRODUCT,OR LOSS OF USE OF THE PRODUCT OR ANY THIRD PARTY PRODUCTS THAT ARE USED IN OR WITH THE PRODUCT, EVEN IF WE HAVE BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES. WITHOUT LIMITING THE FOREGOING,CUSTOMER UNDERSTANDS AND AGREES THAT WE HAVE NO LIABILITY FOR ANY DAMAGE OR DESTRUCTION TO CUSTOMER ELECTRONICS DEVICES OR OTHER PERSONAL PROPERTY THAT ARE USED WITH THE PRODUCT,INCLUDING, WITHOUT LIMITATION, LAPTOPS, OR OTHER HANDHELD DEVICES,OR ANY LOSS OF DATA CONTAINED IN THE FOREGOING DEVICES.NOT WITHSTANDING ANY DAMAGES THAT CUSTOMER MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED HEREIN AND ALL DIRECT OR GENERAL DAMAGES IN CONTRACT,TORT (INCLUDING NEGLIGENCE) OR OTHERWISE), THE ENTIRE AGGREGATELIABILITY OF XEBEC AND ANY OF ITS DISTRIBUTORS AND/OR SUPPLIERS WILLBE LIMITED TO THE AMOUNT ACTUALLY PAID BY CUSTOMER FOR ANY PRODUCT GIVING RISE TO LIABILITY. SOME STATES, PROVINCES, COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO CUSTOMER. THE LIMITATIONS OF LIABILITY SET FORTH ABOVE WILL APPLY TO THE MAXIMUM EXTENT PERMITTED UNDER APPLICABLE LAW.

How Do You Obtain Service?

• You must email our Customer Service Department at contact@thexebec.com during the Warranty Period and provide:
  • Your name
  • Order number
  • Brief written description of the problem
• In order to pursue any remedy under this Limited Warranty, you must possess an original, dated receipt as proof of purchase. This product should be properly packed, preferably in the original package, for shipping.

Designed in Austin, TX
Assembled in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>