Bracelets Smart Bracelet User Guide

Bracelets Smart Bracelet User Guide

Welcome to use our high-performance wrist-band smart bracelet which

creates thoughtful and health experience for you.
Device maintenance

Please remember the following tips when you maintain your smart bracelet:

• Clean the smart bracelet regularly, especially its inner side, and keep it dry.
• Adjust the smart bracelet tightness to ensure air circulation.
• Excessive skincare product should not be used for the wrist wearing the smart bracelet.
• Please cease wearing the smart bracelet in case of skin allergy or any discomfort.

Schematic diagram of main body of the smart bracelet

Power-on

Long press the side button for 3 seconds or plug in the charg ing clamp to charge the smart bracelet.

Downloading and binding of smart bracelet APP

1. Download and install APP
   l.Scan QR code with mobile phone to download APP.
   For !OS system, select APP , storesearch Da Fit.
   Android system, select Application Treasure to download and install Da Fit.Or scan QR code to download

Note: your mobile phone must support Android 5.1 or !OS 8.0 or above, and Bluetooth 4.0 or above.

2. Check mac address
   Long presses the screen for two seconds on the main interface to get the bracelet MAC. MAC address is used to indicate the hardware address of smart bracelet and is the only sign of the smart bracelet and cannot be
   modified. If you check the smart bracelet with a mobile ■ phone, you can find the corresponding smart bracelet by checking the MAC number. The MAC address is used to quickly identify the smart bracelet and the connected mobile phone.

3. Bind smart bracelet with APP

4. Click on

5. Click on your

6. The !OS system will 4. Successfully
   “Ad.d Device” device in the show a Bluetooth pairing bound. to bind the device list request and you can click smart scanned. on Bluetooth “Pairing” to
   bracelet. confirm. Connect it directly to Android system.

Introduction of smart bracelet functions

Power-on status
P6 I switch the menu interfaces of main screen, as the interfaces shown in the following;

Remove Device

For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on Remove device.
For Apple mobile phone after binding removal, you need to click on the symbol on the right in Setting- Bluetooth, and choose to ignore the device. As shown below:

can easily infiltrate into the smart bracelet from the shell gap. When the temperature drops down, the vapor will condensate into liquid-phase
droplets which will easily cause the short circuit inside the smart bracelet and damage the circuit board and then damage the smart bracelet.
Note: for more FAQs, please refer to Da Fit APP feedback.

Warning:

Please consult your doctor before you take a new sport. The smart bracelet should not be used for any medical purpose though it may
dynamically monitor the heart rate at real time.

Frequently Asked Questions (FAQs)

1. Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?
   l > Lock background APR When the Da Fit process is cleared, the smart bracelet will be disconnected from the mobile phone.
   2 > Set APP self-startup
   3 > Unrestricted backgr_ound operation. The Android mobile phone installed with APP intelligently restricts the background operation by default, and App should be set manually without any restriction.

2. Why cannot _the smart bracelet receive message push?
   l > Please co nfirm that you have turned on the switch for message push at the mobile phone client.
   2 > ~lease confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smart bracelet is completed by reading the message from the mobile phone notification
   bar. The smart bracelet will not receive the message push if there is no message in the mobile phone notification bar. (You need to find not!f!cat!on se~tings in the mobile phone settings, and turn on the
   not1f1cat1on switch of WeChat, QQ, call, SMS and mobile phone cl ient). 3 > Turn on the mobile phone — Settings. Enter “Notification use right” on the top search box, re-open Da Fit.

3. Why can’t take a hot bath with the smart bracele t7 Answer: the bath_wa ~e~ has a relatively high temperature, and generates a lot of vapor which 1s m the gas phase with small molecular radius and

Basic Parameters

Sc re en type                          1.4 inc hes TFT
Ba1tery capacity                    170 mAh
Protection degree                  IP 67
System requirement               iOS 8 O or above/Android 5.1 or above

All trademarks are tlie sole property of their respect ive companies

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>