Wireless Guitar System K380C User Manual
- June 8, 2024
- Guitar
Table of Contents
Wireless Guitar System K380C
Features
- UHF wireless ID pairing technology, support 10 variable channels, and support multiple sets using in a band simultaneously.
- Professional 5 guitar effects: original clean, bluesy, flanger, tremolo, metal. You are certain to love it.
- The TX has built-in amplifier, it can connect earphone or speakers to work independently by D3.5 output, and can be played anytime and anywhere, especially suitable for warm-up exercise before live show.
- Applicable field: portable guitar exercise, warm-up exercises before show, etc.
Introduction
Transmitter
-
O “6/CH”: Long press to turn it on or off. Press” 6/CH” briefly after power on, the channel will change between O and 9, and the channel of RX will follow it automatically.
-
MODE: Effect MODE key/ID pairing key, short press it, the guitar sound effects will be changed circularly as below: clean– bluesy– flanger–tremolo –metal. And the corresponding effect LED will be lit.
-
Effect mode LED : clean– bluesy– flanger–tremolo–metal. It supports memory function after power off.
Note: please turn down the volume of K380C TX or speakers appropriately if the ‘metal” effect or others cause noise. -
O”S”: It means TX low battery when the LED screen is flashing. Please charge it in time. The red charging LED will light up when it’s charging. The LED will go out after charging finished.
B. Receiver
0″<.0″ : long press to turn on or off. @”PAIR”: ID pairing key.
C, Indicator LED:
Rx: receiving LED; ” 1EJ, “: The orange indicator lights up when the
power is low;
” S “: The red LED will light up when it’s charging. Then LED will go out
Using Steps
Note: The TX can work independently when its “OUT” port connected to earphone without receiver.
Pairing Operation
ID pairing:
There’s no need to pair as ther were matched before delivery. Please turn off both RX and TX in case of they work abnormally. Then make the following operations.
- Transmitter : In the off state, press and hold the power key • 6/CH ” for a long time until the LED screen lights up, and then press and hold the” MODE” key at the same time until the screen displays the “P • character and flashes, indicating entering the pairing state, then release the two keys at the same time;
- Receiver : First press and hold the ” PAIR ” key, then press and hold the power key ” 6 • to start up, wait for the ” RX” indicator to flash three times, and release the key;
- Short press • 6/CH • button of the transmitter again for confirmation, and the LEDs at both TX and RX are lit, ID pairing is finished.
ID clearance:
Transmitter : In the power on state, first press and hold the ” MODE ”
key, then press and hold the power key • 6/CH ” to shut down and complete id
clearing;
Receiver: In the power on state, first press and hold the” PAIR” key,
then press and hold the power key • 6 ” to shut down and complete id clearing.
The function of pairing: Both TX and RX are identified uniquely for each
other. Support multiple sets using in a band simultaneously.
Tips: please stagger the channels on each transmitter to ensure the sound
quality of wireless transmission when several sets of “K380C” work
simultaneously.
Key Parameter
Work channels: 10
Power supply: built-in Li battery
Wireless distance: about 50ft
(Please note that environment and external interference may cause some
differences. )
Wireless Guitar System K380C User Manual – Download
[optimized]
Wireless Guitar System K380C User Manual – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>