hama R1118174 TV Wall Bracket Instruction Manual

June 2, 2024
Hama

TV Wall Bracket
Operating Instructions
R1
118174

R1118174 TV Wall Bracket

Required tools

hama R1118174 TV Wall Bracket - Parts

| (A1) 8×60 (x3)| | (D1) M8x12 (x4)
---|---|---|---
| (A2) Ø10×60 (x3)| | (D2) M8x20 (x4)
| (A3) M8 (x3)| | (D3) M8x30 (x4)
| (B1) M6 (x4)| | (E1) M4x12 (x4)
| (B2) Ø8×10 (x4)| | (E2) M4x20 (x4)
| (B3) Ø8×20 (x4)| | (E3) M4x45 (x4)
| (C1) M6x12 (x4)| | (F1) (x1)
| (C2) M6x20 (x4)| | (F2) (x1)

hama R1118174 TV Wall Bracket - Parts 16hama
R1118174 TV Wall Bracket - Parts 17

Thank you for choosing aHama product.
Take your time and read the following instructions and information completely.Please keep these instructions in asafeplace for futurereference. If you sellthe device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific
hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package Contents

  • TV wallbracket
  • Wall plate cover (2x)
  • Cable manager (1x)
  • Installation kit (see contents, Fig. 1)
  • These operating instructions

Note
Please check that the installation kit is complete beforeinstalling the bracket and ensurethat none of the parts arefaultyordamaged.

Safety Notes

Warning

  • Given the multitude of terminal devices and wallstructures available on the market, the supplied mounting kit is unable to cover every option.
  • It occasionally happens that the screws for attaching theterminal device to thewall bracket aretoo long.
  • Please note that the supplied wallplugs arefor use with concrete brick and solid brick walls only.
  • Read the operating instructions for your terminal device beforeattempting to mount it. The instructions provide information about thetype and measurements of suitable fastening materials.
  • If the supplied mounting kit does not contain suitable fasteningmaterials for mounting the terminal device, purchase these from aspecialised dealer.
  • If the wallonwhich the bracket is to be mounted is made of different material types and construction types to thosespecified, purchase suitable mounting materials from aspecialised dealer.
  • Never apply force during mounting. This candamage your end device or wall bracket.
  • If in doubt, have this product mounted by aqualified technician -donot attempt to mount it yourself!
  • Do not mount the product above locations wherepersons might linger.
  • Once you have mounted the product and the attached load, check that they are sufficiently secureand safe to use.
  • Youshould repeat this check at regular intervals (at least every three months).
  • When doing so, ensurethat the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximumpermitted dimensions is attached.
  • Make surethat the product is loaded symmetrically.
  • During adjustment, ensurethat the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
  • Maintain the necessary safety clearance around the attached load (dependingonthe model).
  • In the event of damage to the product, remove the attached load and stop using the product.

Intended use and specifications

  • The bracket is used for wallmounting flat panel displaysfor non-commercial, private household use.
  • The bracket is only intended for use within buildings.
  • Use the bracket only for the intended purpose.
Maximum load bearing capacity: 35 kg
Screen size: 48.0 -122.0 cm (US: 19″ -48″)
Depth: 4.8 -29.9 cm
Angle: -15°/+10° (depends on the device)
Pivoting range: Up to 180° on 2joints (depends on the device)
Wall mounting plate dimensions: 8.6 x22.0cm
Mounting holes: According to the VESA standarduntil 200×200

Installation requirements and installation

Note

  • Only mount the TV wallbracket with the help of asecond person.Get the support and help you need.

  • Different end devices have different options for connecting cables and other devices.
    Beforeinstallation, ensurethat the necessary connections willstillbeaccessible after installation.

  • The same mounting kit is included with allofour TV wallbrackets. Depending on the product and mounting type, you may not need to use the entiremounting kit.
    Unneeded screws and other smallparts may be left over,even if the wallbracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case youmight need them later on (e.g. should you move, sellthe product, mount the wallbracket in adifferent location, buyanew TV,etc).

Warning

  • This product is suitable forwallmounting only.
  • Before installing the bracket, ensurethat the wallonwhich the television is to be mounted is suitable for the weight and make sure that no electrical wires, water,gas or other lines arelocated at the installation location.
  • Please note that the provided wallanchors areonly approved forconcrete and solid brick walls.
  • Observe the other warnings and safety instructions.
  • Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1ff.).
  • During installation, the hinges aretobeadjusted so that the TV can be moved side- to-side.

hama R1118174 TV Wall Bracket - Parts 18

  • Given the multitude of terminal devices available on the market, we cannot describe allpossible mounting options here.
  • Please ensurethat the bracket lays flat and evenly on the back of the television.
  • Use the enclosed spacer to even out any unevenness on the back of the television.
  • Ensurethat allscrews have the proper length and can be mounted until they are hand-tight (see Fig. 3b).

Setting and maintenance

Note
Only adjust the TV wallbracket with the help of asecond person. Get the support and help you need.

  • Screws do not have to be loosened for lateral movement.
  • Check that the bracket is secureand safe to use at regular intervals (at least every three months). Only use water or standardhousehold cleaners for cleaning.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted,
and subject to technicalchanges.
Our general terms of delivery and payment are applied.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals