JLAB AUDIO JBSTUD2 Studio Wireless Wired Kids Headphone User Guide
- June 2, 2024
- JLab Audio
Table of Contents
JBUDDIES STUDIO²
2 in 1
WIRELESS + WIRED KIDS HEADPHONES
QUICK START GUIDE
JBSTUD2 Studio Wireless Wired Kids Headphone
WELCOME TO THE LAB
The Lab is where you’ll find real people, developing really great products, in
a real place called San Diego.
PERSONAL TECH DONE BETTER
Designed for You
We actually listen to what you want and we’re always looking for ways to make
everything easier and better for you.
Lab Quality Sound
Choose from different settings and customize your sound style to match exactly
what you’re doing.
Surprisingly Awesome Value
We always pack in the most functionality and fun into every product at a truly
accessible price.
#yourkindoftech
Tech all about you
BLUETOOTH
- Press and hold button for 8 seconds. Release. Lights will flash blue/red.
- Enter your Bluetooth device settings and select JLab JBuddies Studio 2.
CONTROLS
GO WIRED
Connect USB-C cable to computer/tablet/phone for wired mode.
CHARGING
SHARE MODE (Share between two JBuddies Studio 2 Wireless headphones)
-
Connect FIRST headphone to device.
-
SECOND headphone should be power off.
Press hold until flashing blue/red.
-
SECOND headphone 5x Press and blinks blue.
-
FIRST headphone 5x Press to share.
Caution FCC Statement for Users
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using
your product. Changes or Modifications not expressly by the party responsible
for compliance could void the user’s authority to operate the equipment.
ECC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada ‘ s licence exempt RSS(s).
Operation is subject to the following two conditions: 1. This device may not
cause interference. 2. This device must accept any interference, including
interference that may cause undesired operation of the device.
ISED RSS-102 Radiation Exposure Statement
This equipment complies with ISED RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
SAR Rating
Bluetooth Transmitter Power max: 12.5 dBm (18 mW)
Frequency Range
2402 MHz — 2480 MHz
Instructions for Users on Removal, Recycling and Disposalof Used Batteries
To remove the batteries from your equipment or remote control, reverse the
procedure described in the owner’s manual for inserting batteries. For
products with a built-in battery that lasts for the lifetime of the product,
removal may not be possible for the user. In this case, recycling or recovery
centers handle the dismantling of the product and the removal of the battery.
If, for any reason, it becomes necessary to replace such a battery, this
procedure must be performed by authorized service centers. In the European
Union and other locations, it is illegal to dispose of any battery with
household trash. All batteries must be disposed of in an environmentally sound
manner. Contact your local waste-management officials for information
regarding the environmentally sound collection, recycling and disposal of used
batteries.
WARNING: Danger of explosion if battery is incorrectly replaced. To
reduce risk of fire or burns, don’t disassemble, crush, puncture, short
external contacts, expose to temperature above 60 C (140 F), or dispose of in
fire or water. Replace only with specified batteries. The symbol indicating
‘separate collection’ for all batteries and accumulators shall be the crossed-
out wheeled bin shown below:
RED: This product can be used in Europe without restrictions.
DOC: Hereby, PEAG, LLC dba JLab declares that the radio equipment type
Epic Work ANC is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: http://www.jlab.com
WITH LOVE FROM THE LAB
We have lots of different ways to show we care.
GET STARTED + FREE GIFT
Product updates How-to tips FAQs & more
Go to jlab.com/register to unlock your
customer benefits including a free gift.
Gift for US only. No APO/FPO/DPO addresses.
WE GOT YOUR BACK
We’re obsessed with creating the best possible experience around owning our
products. If you have any questions, concerns, or feedback, we’re here for
you. Contact a real human on our U.S.-based customer support team:
Website: jlab.com/contact
Email: support@jlab.com
Phone U.S.: +1 405-445-7219
Phone U.K./EU: +44 (20) 8142 9361
(Check hours jlab.com/hours )
Visit jlab.com/warranty to initiate a return
or exchange.
LATEST AND GREATEST
Our team is constantly improving your product experience.
This model may have new features or controls which are not detailed in this
guide.
For the latest version of the manual, scan the QR code below.
https://qrco.de/bebJpZ
FCC ID: 2AHYV-JBSTUD2
IC: 21316-JBSTUD2
Documents / Resources
| JLAB
AUDIO JBSTUD2 Studio Wireless Wired Kids
Headphone
[pdf] User Guide
JBSTUD2 Studio Wireless Wired Kids Headphone, JBSTUD2, Studio Wireless Wired
Kids Headphone, Wireless Wired Kids Headphone, Wired Kids Headphone, Kids
Headphone, Headphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>