JLAB AUDIO Sport ANC 4 Earbuds User Guide
- July 2, 2024
- JLab Audio
Table of Contents
JLAB AUDIO Sport ANC 4 Earbuds User Guide
BLUETOOTH PAIRING
-
Take earbuds out of case and remove stickers.
Place back in case and close door. -
White light on case indicates charge.
Remove earbuds from case. -
One earbud will blink blue/white indicating ready to pair to your device.
-
Select “J Lab J Buds Sport CAN 4” in your device’s Bluetooth settings.
Voice prompt “Bluetooth connected” followed by blinking white lights will indicate you are connected.
ADDING DEVICES FOR MULTI POINT:
Turn OFF Bluetooth from any previously connected device. Earbuds will
automatically enter Bluetooth Pairing mode.
Turn ON Bluetooth from new device. Select “JLab JBuds Sport ANC 4” in
device settings to connect.
Turn ON Bluetooth on previous device. Audio will switch automatically
between devices.
GO AHEAD, PUSH THE BUTTON
**Touch controls are fully L/R Symmetrical
**
VOLUME UP/DOWN: Swipe Up/Down
PLAY/PAUSE: 1x Tap
TRACK FORWARD: 2x Tap
TRACK BACK: 3x Tap
NOISE CONTROL: Press Hold
EQ CHANGE: **Press Hold Both Earbuds
ANSWER CALL: 1x Tap
HANG UP: 2x Tap
REJECT INCOMING CALLS:** Press Hold
THE RIGHT SOUND FOR EVERY MOMENT
We get it, sound is personal. Choose your sound preferences from our EQ3 settings and customise your sound style to match exactly what you’re doing.
EQUALISER MODES
JLab SIGNATURE
JLab C3™ signature sound with amplified bass and vocals
BEST FOR
Best option for most music Pop, rock, country, electronic and more
BALANCED
Even sound with no additional enhancements
BEST FOR
Podcasts, Audio books Classical music
BASS BOOST
Amplified bass and sub-bass
BEST FOR
Working out, sport and fitness Hip hop, rap, electronic
CUSTOM
Personalise your EQ through the J Lab App.
GET CHARGED (EARBUDS)
-
Earbuds will power off and start charging when placed in the case.
-
Earbuds will auto power on and connect to your device when removed.
CHARGING CASE
Connect the JBuds Sport ANC 4 into a computer or USB-C 5V 1A (or less) output device.
Charging
**LEDS Blink White
Fully Charged
All LEDs Solid White**
FIND YOUR FIT
Place hook behind ear.
Rotate and adjust for best fit.
Try all ear tips for best fit and proper seal.
VOICE PROMPTS
“JLab ON”: Power ON
“JLab OFF”: Power OFF
“Ready to Pair”: J Lab J Buds Sport ANC 4 is ready to pair to Bluetooth
device
“Bluetooth Connected”: Earbud is connected to device
“Battery Full”: 100-80%
“Battery Medium”: 70-30%
“Battery Low”: Less than 25%
(When power decreases to 10%,
“Battery Low” will play one time)
QUICK TIPS
- The left or right earbud can be used independently for music and phone calls. Simply choose one and take out of the case to connect.
- Fully dry off earbuds before putting in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant but the case is not.
MANUAL RESET
CONNECTION FAILURE OR EARBUDS DISCONNECTED FROM EACH OTHER
- Keep the earbuds in the charging case and forget “JLab JBuds Sport ANC 4” from your Bluetooth device setting.
- Quick tap one earbud 7x while in charging case. Earbud blinks blue 4 times.
- Quick tap 7x on other earbud in charging case. Earbud blinks blue 4 times.
- Take both earbuds out of charging case. One earbud LED will shine solid white and other will blink blue/white indicating: ready to pair to your device.
Instructional videos at: JLAB.COM/SUPPORT/JBUDSSPORTANC4
DOWNLOAD THE APP
Customise J Buds Sport ANC 4 with features like an interval timer and update
to the latest software. Download the JLab App in Apple/Google Play Store.
Shop products | Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool
References
- JLab: True Wireless Headphones, Earbuds, Microphones, Personal Audio
- Contact Us – JLab
- Register Your Product – JLab