SIMIX ETC Multi Surface Ceramic Clearcoat Instructions

SIMIX ETC Multi Surface Ceramic Clearcoat Instructions

INSTRUCTIONS

Clean with SIMIX Multi-Surface Peroxide Cleaner & Degreaser

Step 1: Sweep floor to remove all debris

Step 2: Mix SIMIX Multi-Surface Peroxide Cleaner & Degreaser with hot water. 2 small scoops per gallon for lightly soiled floors, 4 small scoops for moderately soiled and half a large scoop for heavily soiled floors.

Step 3: Lay solution on floor via mop, auto scrubber or HVLP unit.

Step 4: Let dwell for 10 to 20 minutes.

Step 5: Scrub floor with low speed buffer, auto scrubber, deck brush or equivalent. Scrub until all grime breaks up into the solution.

Step 6: Pick up dirty solution with auto scrubber, wet vacuum or a hot water surface cleaner with vacuum unit.

Step 7: Repeat steps 5 and 6 until floor is clean of all grease and grime.

Step 8: Rinse floor well, and let dry. Use air mover to speed up drying time.

Apply SIMIX Multi-Surface Ceramic Clearcoat

Step 9: Now mix SIMIX Multi-Surface Ceramic Clearcoat 4 parts water with 1 part coating in pump-up sprayer. (use distilled or RO water)

Step 10: Apply 4 thin coats with small looped microfiber flat mop.

Step 11: Just lightly mist solution on floor and spread with microfiber, do not let coating puddle in grout. Let visibly dry between coats.

Step 12: After last coat dries wait 30 minutes and then replace items moved off floor.

You will need:
Mop/mop bucket
Flat mops
Floor brush attachment
2-4 gallon pump-up sprayer
SIMIX Multi-Surface Cleaner & Degreaser
SIMIX Multi-Surface Ceramic Clearcoat
Scrub floor with low speed buffer, auto scrubber,
deck brush or equivalent.
Fan or air mover
Distilled or RO water

Clean and Seal Ceramic and Porcelain Floors
(lobbys, foyers, bathrooms and kitchens)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>